Boat Outfitting

UV-Resistant Marine Heat Shrink Tape - 96MM x 55M Roll - Straight Edge White9.0 mil, UV-resistant polyethylene film tape used for marine shrink applications and vapor barrier seaming in boat storage and transportation applications, as well as for patching, repairing, bundling, wrapping, and sealing applications across various surfaces. Designed with a synthetic rubber-based pressure-sensitive adhesive, PE 900 marine heat shrink tape offers high conformability that creates a watertight seal and humidity resistance in all weather and climate conditions.Features: UV-resistant polyethylene film tape Excellent conformability and flexibility Maintains a watertight seal Technical Specifications: Tape Width - 96MM (3.78") Roll Length - 55M (60 yds) Adhesion to Backing - 35 oz/in width Adhesion to Stainless Steel - 80oz/in width Application Temperature Range - 65°F to NA Elongation - 100% Service Temperature Range - 14°F to 158°F Tensile - 22 lbs/in width Thickness - 9.0 mils Quick Guide (pdf)Brochure (pdf)

Read more less

UV-Resistant Marine Hull Preservation Tape - 96MM - 33M Roll - Straight Edge Blue9.0 mil, UV-resistant polyethylene film tape used for protection during marine transportation and temporary outdoor boat storage. It is designed with a synthetic rubber-based pressure-sensitive adhesive. PE 901 marine hull preservation tape maintains a watertight seal, even in the most demanding conditions, and removes cleanly with little to no residue.Features: UV-resistant polyethylene film tape Excellent conformability and flexibility Clean removal* Maintains a watertight seal *Although hull preservation tape is designed not to leave residue, we recommend testing a small area before applying to the entire surface to avoid the possibility of a top layer of paint or finish removalTechnical Specifications: Tape Width - 96MM (3.78") Roll Length - 33M (36 yds) Adhesion to Backing - 35 oz/in width Adhesion to Stainless Steel - 85 oz/in width Application Temperature Range - 65°F to NA Elongation - 100% Service Temperature Range - 14°F to 158°F Tensile - 22 lbs/in width Thickness - 9.0 mils Quick Guide (pdf)Brochure (pdf)

Read more less

StowPod - BlackAre you tired of fishing lures, keys, and pliers scattered everywhere? Then the RAILBLAZA StowPod Storage Caddy is just what you need! This awesome storage solution securely holds everything in one place – from your tools and essentials to your drinks, cellphones, VHF, and binoculars. And with a movable partition inside, it can be easily transformed from an all-purpose container to a beverage holder. Plus, its unique design attaches to railings, consoles, and gunwales with a StarPort so it won’t take up precious floor space. So forget the hassle of disorganization and give yourself the gift of stress-free boating with this handy StowPod!Enjoy a clutter-free boat ride with the RAILBLAZA StowPod Storage Caddy! This must-have storage solution securely holds all your tools and goodies while leaving your precious floor space untouched. And with its movable partition, you can easily switch from an all-purpose container to a beverage holder in no time.StowPod Overview:STOP THE DISORGANIZATION! - The RAILBLAZA StowPod Storage Caddy is the perfect solution for anyone tired of fishing lures, keys, and pliers scattered everywhere. This awesome storage solution securely holds everything in one place - from your tools and essentials to your drinks, cellphones, VHF, and binoculars.SECURELY HOLDS EVERYTHING - With a movable partition inside, the StowPod can be easily transformed from an all-purpose container to a beverage holder. Plus, its unique design attaches to railings, consoles, and gunwales with a StarPort so it won't take up precious floor space.GIVE YOURSELF THE GIFT OF STRESS-FREE BOATING - Stop the hassle of disorganization and give yourself the gift of stress-free boating with this handy StowPod!Features: Holds pliers, keys, lures, phones, VHF’s, binoculars, drink bottles, sunblock, mugs & much more… Movable drink holder partition Mounts into any vertical or horizontal StarPort or can be stabilized in place Mounts on rails or inflatables by  adding other applicable RAILBLAZA mounts Easily removed and stowed when not in use or transferred to another position Specifications: Weight: 0.5 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x StowPod 1 x StarPort Adaptor 1 x Cup Partition Specifications: Type: Tools Box Dimensions: 4"H x 5"W x 10"L WT: 0.5 lbs UPC: 856154004568

Read more less

Instant Calcium, Rust & Lime Remover - 16oz Spray BottleC.R.L means clean, reveal, and luster! Do it the right way with this deposit killing organic formula. One spray then polish away with Calcium, Rust & Lime Remover!Quickly and easily removes even the crustiest of stains, deposits and build-up. Made of organic salt, it is safer and easier to use than traditional cleaners. Recommended for removal of hard water spots and rust stains.Use On: Glass Plastic & Acrylics Aluminum Fiberglass Tile Stainless Steel Brass Copper Painted Surfaces Enamel finishes Instantly Removes: Hardwater Spots Encrusted Calcium/Lime Deposits Heavy Green Tarnish Heavy Oxidation Rust Corrosion Grease Oil Water Stains Soap Scum Build-up Not for: Chrome, Marble, some Granite, Jura, Travertine & TerrazzoWARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause reproductive harm, and 1, 4-Dioxane which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Hard Water Box Dimensions: 2"H x 4"W x 11"L WT: 1.3 lbs UPC: 065925016062

Read more less

Fuel Stabilizer - 16oz *Case of 12*AMERICA’S #1 FUEL STABILIZER TREATMENTSTA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing.USAGE DIRECTIONS:Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc.PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 2"H x 5"W x 9"L WT: 12 lbs

Read more less

Fuel Stabilizer - 16ozAMERICA’S #1 FUEL STABILIZER TREATMENTSTA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing.USAGE DIRECTIONS:Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longer.  It keeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc.PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 2"H x 5"W x 9"L WT: 1 lbs UPC: 073905222075

Read more less

SikaBiresin® AP077 White Quart ** BPO Hardener Required **SikaBiresin® AP077 is a polyester filler and fairing compound that offers the user a smooth workable paste with a set fast cure to expedite those applications for repair or finish. It is easier to sand than conventional fillers and can be finished to a feather edge. This material can be easily applied with a squeegee, spatula, or flat tool, and once cured will accept virtually all types of coatings and decorative films.Features: Exceptional adhesion Very quick setting Minimal shrinkage Usage:SikaBiresin® AP077 can be used in the following applications: gel coat blister repair, fiberglass parts repair, and filling cloth imprint on FRP panels. This material has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates.Advantages: Exceptional adhesion Very quick setting Minimal shrinkage High service temperature Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption for above or below-waterline applications Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Marine Mold & Mildew Preventer - 1qtSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold & Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.Need help removing the mold first? Check out Xanigo Marine's Mold & Mildew Stain Remover! Features: Long-lasting residual protection World's only patented organosilane compound, which provides greater protection No alcohol and non-flammable Water-based (only water-based organosilane) Long shelf life Specifications:Bottle Size: 32 ouncesThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.25 lbs UPC: 860007772702 Quick Guide (pdf)

Read more less

M90 Mach Rotary Steering Cable - 14'The M90 Mach 14' Rotary Blue Case Steering Cable. Specifications: Cable Length (Feet): 14' Box Dimensions: 3"H x 18"W x 28"L WT: 7.5 lbs UPC: 702755044079

Read more less

M90 Mach Rotary Steering Cable - 12'The M90 Mach 12' Rotary Blue Case Steering Cable. Specifications: Cable Length (Feet): 12' Box Dimensions: 2"H x 18"W x 27"L WT: 6.75 lbs UPC: 702755044055

Read more less

CleatPort RIBMount with 3M - GreyMake your inflatable vessel even more functional and efficient with a CleatPort RIBMount from RAILBLAZA! This unique product allows you to mount your cleat wherever you choose, in addition to providing the ability to attach any of our StarPort accessories. The 3M backing makes for an easy install! That’s right – one point can hold your cleat AND any RAILBLAZA accessory. With the CleatPort RIBMount, you’ll have a tie-off point for stern lines and bow lines on small craft with the convenience of extra functionality at your fingertips. Get yours now to conserve space out on the water today.It's time to upgrade your inflatable vessel with the CleatPort RIBMount from RAILBLAZA! Get the added convenience of mounting not one, but two things at once – a cleat AND any StarPort accessory. You'll have a tie-off point for stern and bow lines, plus 3M backing for an easy install! Upgrade your small craft today and enjoy the convenience of extra functionality at your fingertips.Features: Mount your cleat in seconds Attach any RAILBLAZA accessory with ease No corrosion - stainless hardware Comes with 3M Backing for easy install Specifications: Weight: 0.58 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x CleatPort Assembly  1 x RibPort

Read more less

15" Great HawkFor boats from 8m to 20mThe Great Hawk is designed for Cruising and Racing yachts up to 20m. The Great Hawk vane arm is made from the same super tough nylon and the Reference Arms are made from glassed filled nylon for ultimate rigidity and UV protection. The precision balanced vane arm and Hawks "V" Jewel bearing surface gives instant response to shifts and gusts with minimal inertia. The Reference Arms may be preset at 55, 60 or 65 degrees or any angle you prefer and can be used for either upwind or downwind angles. The 5mm Aluminum support rod is strong enough to take normal wear and tear, but can be bent straight should it be knocked while the mast is being stepped or unstopped. The Great Hawk is easily removed from its mounting bracket with one screw and the mast bracket can be mounted vertically or horizontally. Specifications: Vane Arm length 38cm (15")  Overall height 29cm (11.4")  Overall weight 70 grams. Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 3"H x 5"W x 16"L WT: 0.5 lbs UPC: 652773100106

Read more less