In-Season Protection - 10ozSTA-BIL In-Season Protection Fuel System Treatment, America's #1 Ethanol Treatment, is engineered to combat the negative effects of ethanol-blended fuels. This industry-leading formula prevents corrosion, cleans the fuel system, and prevents the buildup of unwanted gum and varnish, ensuring your equipment will be ready to go whenever you need it. 1oz treats 5 gallons of gas. If using small engine equipment, pour directly into your gas can. If adding to a vehicle, it is best practice to add STA-BIL In-Season Protection Fuel System Treatment before adding fresh fuel at the pump. This product is designed to be added to the fuel as soon as you get it, so that you know the fuel is fresh. This formula will also keep gas fresh for up to a year. Use throughout the season to make sure your engine runs top-notch year-round!Features:
America’s #1 Ethanol Treatment
Prevents Corrosion Caused By Ethanol Blended Fuels
Increases Engine Power and Fuel Efficiency
Effective In All Gasoline, Including Ethanol and Non-Ethanol
Engineered For Year-Round Usage - Use At Every Fill-Up
Keeps Fuel Fresh For Up To 12 Months
Nav-Tracker 1.0 Elite with 80' CableGOST Nav-Tracker ELITE IDP was developed to offer a Hardwired marine grade, water resistant, monitoring and tracking system that provides global arm/disarm over satellite from anywhere in the world with the reassurance of a battery backup which will notify you with a 'Monitoring Alert' if your batteries are either cut off completely or if the battery voltage reaches 10.2VDC so it also functions as a battery low voltage sensor for the battery it is connected to. The system can be controlled and monitored remotely, no matter where the vessel is located globally, with the exception of the most extreme polesGOST Satellite NAV-Tracking delivers total peace of mind. The award-winning satellite tracking packages, powered by Inmarsat’s geostationary satellites constellation, provide you with the option to securely monitor your boat from anywhere in the world with 99.99% reliability.Features:
Satellite Antenna IDP
Push-Button Arming Switch
Remote Access & Monitoring
Standard 25m/80ft GPS Cable Included (GNT-30)
Package Includes:
GOST Nav-Tracker 1.0 Elite unit w/ Tamper-proof backup battery
GOST Nav-Tracker Antenna
25-meter Antenna Cable
2-meter Power Cable w/ IP67 rated latching Arm/Disarm
GNT-L-Bracket to mount the antenna
Brochure (pdf)
Water Resistant StrobeGOST Strobe lights: Ultra-small, self-contained, semi-hemispheric LED lights. Surface or internal mount within composite head lamps, cornering lamps, and tail light assemblies. Featuring 25 scan-lock flash patterns, including synchronizing features for alternating or synchronous flashing of multiple lamps. New lens technology enhances light distribution for optimum dispersion and intensity at critical angles.Features:
Ultra Small
Water Resistant
Semi-Hemispheric
LED
Nav-Tracker 1.0 with 80' Cable - Insurance PackageGOST Nav-Tracker 1.0 IDP was developed to offer a hardwired marine grade, water resistant, monitoring and tracking system that provides global arm/disarm over satellite from anywhere in the world.GOST Satellite NAV-Tracking delivers total peace of mind. The award-winning satellite tracking packages, powered by Inmarsat’s geostationary satellites constellation, provide you with the option to securely monitor your boat from anywhere in the world with 99.99% reliability.Features:
Satellite Antenna IDP
Push-Button Arming Switch
Remote Access & Monitoring
Standard 80ft GPS Cable Included
Package Includes:
Nav-Tracker 1.0 IDP SAT/GPS Tracking Device
80' Antenna cable
GNT-L-Bracket Antenna Gunwale/Bulkhead Mount
GNT-1.0-Push Button arm/disarm
Brochure (pdf)
1 Liter Pouch - Black with 4" RollerKiwiGrip is a durable, non-skid deck coating system developed by New Zealand yachtsmen specifically for use on boats. Most other traction or anti-slip coatings are simply repackaged industrial products.The hard acrylic polymer provides a durable, homogeneous, elastic surface. It spreads quickly and easily. By using one of KiwiGrip's proprietary rollers and by varying application techniques, the texture can be adjusted from fine to aggressive for the right amount of traction.In late 2011, KiwiGrip introduced an improved formulation for longer working time and improved color retention.Features:
Low-glare, IR reflective finish
Homogenous color that won't wear through and expose filler materials
UV stabilizer for consistent color
Vary texture by application technique used
Apply over wood, fiberglass, epoxy, concrete, or metal
Rolls over other worn non-skid surfaces nicely
Non-toxic, no volatile solvents, very low VOC
Cleans up with soap and water
Complete, detailed "how-to" instructions come with every can
Coverage: 2 square meters per liter (80 SF/Gal)
52mm (2-1/16") ViewLine Flex Gauge - J1939 - WhiteVeratron's VL Flex 52 - J1939 was designed to meet the rigorous demands of commercial use. Supporting a broad range of sensors, the all-in-one round gauge is singularly unique in that it can display two sets of diesel engine data simultaneously and is easily configured using a mobile device and the companion Veratron app.The VL Flex 52 - J1939 supports input from analog sensors as well as J1939 and LIN 2.0. The simple but effective graphic design can be set up in a single or dual layout, pulling from up to 30 sets of data. It can display a large numerical value and colored bar graph that are viewable in any light condition due to its sun-readable PMMA lens with anti-glare. *VL Flex Configurator App (Android or iOS) has to be downloaded - no chargeSupported Configurations:
Wheel Speed - Engine Load - Fuel Level - Oil Level - Oil Pressure - Boost Pressure - Coolant Pressure
Coolant Temp - Battery Current - Brake Pressure - Gear Oil Level - Gear Oil Pressure - Battery Potential
Air Temperature - Exhaust Temperature - Oil Temperature - Gear Oil Temperature - Fuel Rate
Fuel Economy - Engine Speed - Odometer - Engine Hours - Total Fuel - Clock - DEF/BLUE Level
Battery SOC/SOH - Battery Temperature - Battery Autonomy
Features:
1.44” sun-readable color TFT display
J1939 Interface
Front lens with anti-glare and anti-fog treatments
52mm (2-1/16") mounting diameter
In the Box:
VL Flex J1939
52mm Mounting SpinLock
8 Pole Cable
Safety Instructions
*Sold as an individualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Box Set: No
Gauge Size: 2-1/16"
Gauge Type: Multifunction
Series: ViewLine
Voltage - Input Range (Volts): 12/24v
Box Dimensions: 3"H x 3"W x 4"L WT: 0.3 lbs
UPC: 7640190290008
Owner's Manual (pdf)Brochure (pdf)
52mm (2-1/16") IBM Kit - 24VWhether on the water, in an RV, riding the trail, or operating a piece of industrial equipment, a dead battery will ruin anyone's day. Veratron's VL Flex Intelligent Battery Monitor Kit contains everything needed to deliver real-time battery health and status to the smallest dashboard. It combines two pioneering products, Veratron's award-winning Intelligent Battery Sensor and its revolutionary VL Flex Instrument. All additional components needed for a fast and easy installation are included.The innovative Intelligent Battery Sensor measures and reports voltage, current, and temperature. It also originates additional critical data such as the state of charge and overall battery health. The device works for either a single 12V lead, gel, or AGM battery or a combination of two 12V batteries to a 24V unit.Features:
Flex display kit for Battery monitoring
1x Resistive input for Fuel or Fresh Water level
Dedicated harness with pushbutton for screen scrolling
In the Box:
VL Flex 52 IBM Gauge 24V
Intelligent Battery Sensor (IBS) 24V
Battery Pole Adapter M8
Wire Harness 24V IBS 6m
52mm Mounting Spinlock
Push Button for Wire Harness
Safety instructions
*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Box Set: No
Gauge Size: 2-1/16"
Gauge Type: Battery Condition
Voltage - Input Range (Volts): 24v
Box Dimensions: 4"H x 8"W x 12"L WT: 2 lbs
UPC: 7640178729735
Owner's Manual (pdf)Brochure (pdf)
XKA Aluminum Alloy Trim Tab Kit with MLC-1 Control - 9 x 24 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats. All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge. All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket. The Lectrotab MLC-1 is a microprocessor based trim tab control that can move both tabs simultaneously at the touch of a single button. It includes LED tab position indicators which will automatically dim in darkness and brighten in sunlight. Features:
All Tabs sealed with a corrosive resistant epoxy coating
Equivalent strength to 10 gauge stainless steel
"No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 9" x 24" (23 x 61 cm)
Boat Length - 24' to 37' (7 to 11 M)
Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
Control Mounting Hole Cutout - 2" (50 mm)
Control Operating Voltage - 12 or 24 V
In the Box:
One (1) Manual Leveling Control
Two (2) Aluminum Alloy tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit Specifications:
Actuator Type: Electro-Mechanical
Construction: Aluminum Alloy
Box Dimensions: 4"H x 5"W x 6"L WT: 20.9 lbs
Owner's Manual (pdf)Brochure (pdf)
M90 Mach Black Rotary Steering Cable - 11'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features:
Minimal feedback
Fast connections for simple installation
Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9")
Stainless steel cable output end featuring patented gasket (engine side)
Specifications:
Cable Length (Feet): 11'
Box Dimensions: 3"H x 18"W x 28"L WT: 6.5 lbs
UPC: 702755052043
M90 Mach Black Rotary Steering Cable - 17'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features:
Minimal feedback
Fast connections for simple installation
Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9")
Stainless steel cable output end featuring patented gasket (engine side)
Specifications:
Cable Length (Feet): 17'
Box Dimensions: 3"H x 18"W x 28"L WT: 8.5 lbs
UPC: 702755048022
XKA Aluminum Alloy Trim Tab Kit with MLC-1 Control - 9 x 18 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats. All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge. All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket. The Lectrotab MLC-1 is a microprocessor based trim tab control that can move both tabs simultaneously at the touch of a single button. It includes LED tab position indicators which will automatically dim in darkness and brighten in sunlight. Features:
All Tabs sealed with a corrosive resistant epoxy coating
Equivalent strength to 10 gauge stainless steel
"No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 9" x 18" (23 x 46 cm)
Boat Length - 21' to 30' (6.5 to 9 M)
Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
Control Mounting Hole Cutout - 2" (50 mm)
Control Operating Voltage - 12 or 24 V
In the Box:
One (1) Manual Leveling Control
Two (2) Aluminum Alloy tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit Specifications:
Actuator Type: Electro-Mechanical
Construction: Aluminum Alloy
Box Dimensions: 4"H x 5"W x 6"L WT: 17.9 lbs
Owner's Manual (pdf)Brochure (pdf)