Boat Outfitting

Elastometric 3 oz (89ml) Sealant Tube - ClearA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (-48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.Features: Twists, bends, expands, compresses Seals ports, bed hardware and stops leaks Perfect for trim tabs and transducers WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Primer-206 G+P Black 250ml BottlePigmented, solvent-based primer for various substrates. Sika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component Polyurethanes.  Features: Enhanced adhesion on a wide variety of substrates Easy to apply Usage:Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces, and some plastics and metals.Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Read more less

Cleaner Wax - Paste *Case of 6*Meguiar’s versatile, one-step wax is specially formulated to produce eye-dazzling results on all finishes. Rich conditioning oils with gentle cleaning ability make it an excellent choice for daily drivers exposed to the elements.Features: Cleans your paint while you wax Rich conditioning oils polish & protect Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 5"W x 5"L WT: 5.4 lbs

Read more less

BPO Cream Hardener White 4oz Tube Resin RequiredBPO (benzoyl peroxide) is a peroxide used for curing amine accelerated polyester resins and fillers. It leads to rapid hardening and de-molding, even at low temperatures.

Read more less

Mold & Mildew Stain Remover - 32ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 32 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.5 lbs UPC: 860007772788 Quick Guide (pdf)

Read more less

Bubble Gum Micro Polish + High Gloss Polymer - QuartThe micro-polish will remove fine swirls and light oxidation, and the high-gloss polymer protectant will deliver a super shine and extreme durability. For best results, use a rotary machine with a yellow polish pad or random orbital polisher and finish with a topcoat of Smoove White Cloud.Features:It contains a micro-polish with a high-gloss polymerSpecifications:Size: Quart Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 9"L WT: 2.3 lbs UPC: 794811504603

Read more less

Seafood Forks for Crab & Lobster - 4 PackA must-have tool for easily removing crab and lobster meat from those hard-to-reach places in shells. Elegantly designed and easy to use, Toadfish Seafood forks are a great addition to any home entertainer's arsenal. This stainless steel tool features a scoop on one end and a two-prong fork on the other.Toadfish Model Number: TFCRABLOBFORKSFeatures: Full stainless steel construction with a non-slip rubber middle Comes in a pack of 4 9" Inch Utensils Does not include Crab Claw Cutter Gamechanger! When it comes to great seafood, it’s all about fast, simple access to the good stuff. Use the multi-use forks with a helpful scoop on one end and a fork on the other. No chips, splinters, or frustration, just a great time digging in & feasting on your favorite meal.

Read more less

Teak Brite® Powder Cleaner - Jumbo - 64ozOne-step heavy-duty powder cleaner for teak. Will not remove soft grain from wood like two-part cleaners. Cleans wood like new and leaves ready for teak oil sealer application. Designed for decks, swim platforms, furniture and horizontal surfaces. Specifications: Type: Teak Box Dimensions: 5"H x 5"W x 9"L WT: 4.15 lbs UPC: 020537011850

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1319- 3-Blade - 13.25" x 19 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13-1/4" Material: Aluminum Pitch: 19 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 5.9 lbs UPC: 652480102301 Quick Guide (pdf)Brochure (pdf)

Read more less

Relay Module - 12VA Relay Module reduces voltage drop in Trim Tab Systems with longer wire runs. With the older trim tab controls, RT1000 and RS1000, the Relay Module also functions as an Interrupter Relay and will prevent a fuse from blowing if Bow Down and Bow Up are inadvertently pressed at the same time. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

T-Top Bow Shade 7'L x 102"W - SandRecommended for boats 23'-26'A quick and easy way to gain additional shaded area on your center console boat with a T-Top installed. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is secured to the T-Top and bow rails with adjustable straps and quick release buckles for simple and fast installation. Shade folds down to compact size for ease of storage and is available in 9 colors to best match your boat.  Specifications: Type: Covers Box Dimensions: 4"H x 9"W x 10"L WT: 3.25 lbs UPC: 040011475046

Read more less

Check Valve and AdapterThe FATSAC Check Valve and Adapter is a two part fitting that replaces the FATSAC Quick Twist/Sac Thread Adapter that comes with ballast bags.The FATSAC Check Valve and Adapter is an optional upgrade for FATSAC ballast bags that replaces the standard Quick Twist Adapter.  Just as easy to connect and disconnect as the standard fitting, the W744 Check Valve adapter also features an integrated check to prevent water from exiting the bag when disconnecting and connecting the pump for filling or draining.Features: Air Inflation Valve - simply use a standard air pump to inflate Includes all O-rings needed, and by-pass adapter fitting for emptying water Manual 1 way check valve when manually filling bags with Supa Pump  *Sold as in individualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 3"W x 3"L WT: 0.45 lbs UPC: 817177021529 Brochure (pdf)

Read more less