Boat Outfitting

3-3/4" Rudder/Trim Tab Anode - ZincAluminum trim tab or rudder anode with 2 halves and stainless steel hardware. Nuts are pressed into the casting.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator. Specifications: Material: Zinc Box Dimensions: 2"H x 4"W x 5"L WT: 1.25 lbs UPC: 870648007811

Read more less

1" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator.Dimensions: A - 1" (25.4mm) B - 2-1/8" (54mm) C - 2-1/8" (54mm)

Read more less

Yamaha 40-100HP Outboard Complete Anode Kit - AluminumUsed on Yamaha 40-100hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Includes: 00123A Qty 1 (688-45371-02) 00126A Qty 1 (6H1-45251-02) Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1 lbs UPC: 870648001871

Read more less

Suzuki 200-250HP Outboard Complete Anode Kit - AluminumComplete kit of anodes and hardware for Suzuki 200-250hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Includes: 00353A Qty 1 (55320-94900) 00354A Qty 3 (55320-95311) Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 0.8 lbs UPC: 870648004827

Read more less

Volvo Penta DPS-A/SX-A Complete Anode Kit - AluminumUsed on Volvo Penta DPS-A, DPS-B, SX-A, and FWD-B outdrives.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Anodes include the exclusive, patented “red spot” wear indicator.Includes: 00156A Qty 1 (3841427) 00157A Qty 1 (3883827) Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1.7 lbs UPC: 870648002892

Read more less

Cockpit Coaming Bolster Set (2) - 4" x 39" & 20mm Thick - Caribbean Blue with Brushed TextureSeaDek Coaming Bolsters are a great alternative to traditional upholstered bolsters. Durable and easy to install, these bolsters will provide years of trouble-free service thanks to their closed-cell PE/EVA foam construction and robust pressure-sensitive adhesive. Each set contains two 4” x 39” bolsters that are 20mm thick.Specifications: Dimensions: 4″ x 39″ Material Thickness: 20mm Texture: Brushed Color: Caribbean Blue Set of Two (2) *Two coaming bolsters are included in this set

Read more less

30 Amp Power Cord Plus Cordset - 35' - YellowAll Marinco cordsets are made of the highest quality marine-grade construction with features you won't find on other power cords.Features: Watertight molded plug and connector for safety and durability Heavy-duty, super flexible marine-grade cable (30 amp 10 gauge, 50 amp 6 gauge) All models include a standard threaded ring for hook-up to ordinary threaded inlets Corrosion-resistant, nickel-plated contacts Power Indicator Light: Boatside connector features a molded-in LED light When it glows red, you know you have power to the boat Contour Grip with Thumbnail Locator: Both plug and connector ends are molded to fit the contour of your hand. When the thumbprint is in the noon position, the blades line up for easy connection Marinco Easy Lock system: Quickly locks the cord set to the inlet in just 1/8 of a turn Exclusive locking tabs engage slots built into all Marinco inlets WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Length: 35' Type: Cordset Box Dimensions: 4"H x 12"W x 12"L WT: 10.4 lbs UPC: 093344051197

Read more less

12732-A Nylon Cylinder Bracket *1-PieceNylon Cylinder Bracket used for mounting cylinder to transom and trim tabs. These brackets resist ultraviolet rays and are made of impact-resistant nylon glass filled; therefore, eliminating expansion from hydraulic pressure and water absorption.

Read more less

StarPod 3 System for Starlink Gen3 Standard Dish *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board large boats with a hardtop, radar arch, or other flat mounting surface. The waterproof housing incorporates a 10-degree polyethylene wedge that is CNC routed to fit the internal swivel tube and allows the dish to be rotated to optimize the view of Starlink satellites if necessary. The angle also facilitates rainwater runoff that can degrade a signal if water accumulates on a flat-mounted Starlink dish. The StarTower base is solidly built with 8 mm thick aluminum and powder coated with a high gloss white finish. The bottom base of the StarTower measures 7″ square.What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of the signal while inside the thermoformed acrylic-capped ABS housing.Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.How do I mount a Starlink dish inside a StarPod?The kickstand base that comes with a Starlink Gen3 Standard dish is not utilized when mounting inside a StarPod; only the dish itself is used. The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup/installation guide for this process). Once the initial Starlink setup process is complete, the dish can be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).Features: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for matching to the NavPod wrench for better holding ability when tightening. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod. Specifications: Starlink Gen3 Standard dish; 23.04 x 15.07″ dish size Starlink Dish Not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Large Helm Pad - Caribbean Blue/Storm GreyAre you tired of a throbbing back or knees after a long day of fishing?  Our Helm Pads will be your go-to anti-fatigue pad for longer and more comfortable days on the water.  Helm Pads are the perfect way to add extra comfort and protection to your boat’s helm.SeaDek's softest, most comfortable Helm Pad yet.  Your knees and back will thank you after a day on our Dual-Density helm pad.  No boat is complete without this essential addition, featuring an ultra-comfortable, low-density .67" foundation with our legendary standard .1" brushed top layer for traction and durability. The Dual Density Helm Pads utilize a 3M adhesive for an easy peel-and-stick installation.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Caribbean Blue/Storm Grey Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

16” x 39" 20mm Dual Density Large Helm Pad with SeaDek Logo - Brushed Texture - Aqua Camo/Black (406.4mm x 990.6mm x 20mm)SeaDek's softest, most comfortable SeaDek Helm Pad yet! Dual-Density Helm Pads are the perfect way to add extra comfort and protection to a boat’s helm. Featuring an ultra-comfortable, low-density 17mm foundation with SeaDek's legendary standard 3mm brushed top layer for traction and durability, no boat is complete without this essential addition. SeaDek helm pads utilize a robust adhesive for an easy peel-and-stick installation and are sure to be a go-to anti-fatigue pad for longer and more comfortable days on the water.Features: Absorbs impact Protects the knees and backs of boaters Specifications: Style: Pinline (a simple outline with a powerful look) Color: Aqua camo/black Overall Dimensions: 16″ x 39″ (406.4mm x 990.6mm) Material Thickness: 20mm Texture: Brushed

Read more less

40" x 80" 6mm Two Color Full Sheet - Brushed Texture - Cool Grey/Black (1016mm x 2032mm x 6mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet features two colors, a modern brushed texture, and non-skid qualities for optimal comfort.Specifications: Colors: Cool grey/black Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed

Read more less