Boat Outfitting

Cut & Finish Wool Polishing Pad for Rotary Use with Polishers LH19E 180mmThe CUT & FINISH Rotary Wool Polishing Pads represent a significant leap forward in rotary pad technology, offering versatility for detailers, body shop technicians, and other applications where rotary polishes are frequently used. These pads utilize only the highest-quality, genuine merino wool fibers, refined to a consistent 20mm length and assembled in an extremely dense pattern onto a specially designed foam interface.The CUT & FINISH Pads provide an optimized balance, an exceptional cut, and a better finish than any wool rotary pad available on the market today. The unique design allows the operator to manipulate the pad in several applications and contour to panel shapes.RUPES CUT & FINISH Wool Pads are compatible with virtually all rotary-style polishers, but perform best with a low speed and high torque tool like the BigFoot LH19E. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.02 lbs UPC: 8058341049747 Quick Guide (pdf)

Read more less

5/8" Type A2 Fuel & Vent Line Hose - Black - Sold by the FootTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.Features: Sold by the foot Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Applications: Fuel Hose for vent and diesel distribution  For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Specifications: Inner Diameter: (inch) 5/8" / (mm) 15.9 Outer Diameter: (inch) 0.960 / (mm) 24.4 Burst Pressure: (psi) 200 / (mpa) 1.38 Working Pressure: (psi) 50 / (mpa) 0.34 Bend Radius: (inch) 3" / (mm) 76.2 Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72 *The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 5/8" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 1"L WT: 0.27 lbs Quick Guide (pdf)

Read more less

Dual Station Floating Ground - 400 PSI 1/8-27NPTFeatures:Ground - Floating  Connection - Knurled Nut Voltage - 6 - 24V Thread - 1/8-27 NPTF Max. Pressure Range - 400 PSI / 25.58 Bar  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 2"H x 2"W x 5"L WT: 0.35 lbs UPC: 754059005065

Read more less

Pressure Sender 80 PSI 1/4-18 NPT Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Max. Pressure Range - 80 PSI / 5 bar (10-180Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 2"H x 2"W x 5"L WT: 0.25 lbs UPC: 754059004679

Read more less

52MM (2-1/16") ViewLine Trim Indicator Gauge Up/Down - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 8–32 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Series: ViewLine Gauge Type: Trim Guage Gauge Size: 2-1/16" Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 3"H x 3"W x 4"L WT: 0.35 lbs UPC: 7640178723085 Owner's Manual (pdf)

Read more less

AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features: Square Mixing Tip 4" Long Case of 50

Read more less

Extra Large Stainless Steel Flush Cupholder Features: Longer depth fits larger water bottles and can coolers (including Yeti) Flush mount design Drink pad made with UV-resistant vinyl for longer life Drink pad cushions a beverage Vinyl pad affixed without adhesive Includes Thick Mounting tap & 3/8" drain tube Holds Stanley-style drink cups up to 30 oz Specifications: Cut Out: 3-5/16" Outer Diameter: 4-5/8" Depth: 6-7/8" Material: Stainless Steel

Read more less

Marine Ultimate Vinyl Boat Seat Care KitThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat Seats! Say goodbye to mold and mildew on your boat! The Xanigo Marine Ultimate Vinyl Boat Seat Care Kit is here to save the day. This kit includes everything you need to remove and prevent unsightly mold and mildew on your vinyl boat seats, life jackets, canvas, bumpers, carpets, and other areas with high moisture.Three Solutions | Four Easy Steps: Step 1 Remove: Simply spray a generous amount of the Mold & Mildew Stain Remover onto the affected area and let it soak for 60-90 seconds. Agitate the area with a stiff brush to remove the mold from the pores and let the product do its job, leaving behind a clean, like-new, seat! Thoroughly rinse away the residue with fresh water. Don't forget, no direct sunlight! Repeat if necessary. Step 2 Neutralize: Spray the Waterless Wash onto your seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover and prime the surface for the Mold & Mildew Preventer to bond to. That's it! Step 3 Prevent: Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, your boat will be protected against mold and mildew for up to 90 days. No wiping is required! Step 4 Maintain: Spray the Waterless Wash and wipe it down with a microfiber towel to clean away grime and sunscreen from your seats, all while enhancing the protective layer created by the Mold & Mildew Preventer. Do this every time you use your boat to keep it clean, fresh, and mold-free! What's Included? (1) 16 oz. bottle of Mold & Mildew Stain Remover (1) 32 oz. bottle of Mold & Mildew Preventer (1) 32 oz. bottle of Waterless Wash Brochure (pdf)

Read more less

Waterless Wash & Fabric Refresher - 1qtThe Xanigo Marine Waterless Wash is the perfect way to keep the boat clean between Xanigo Marine Mold & Mildew Preventer applications without the use of harsh chemicals or wasting water. No hose or running water is needed!Protect investments by protecting against mold and mildew on seats, life jackets, vinyl, canvas, ropes, carpets, and other areas with high moisture.Specifications:Bottle Size: 1 quartThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Washes Box Dimensions: 3"H x 3"W x 10"L WT: 2.3 lbs UPC: 860007772740 Quick Guide (pdf)Brochure (pdf)

Read more less

90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim CoverComposite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns.  This eliminates the need for an anti-siphon loop in the vent hose.  Features: For 5/8" I.D. hose (inch) 3/4" install. hole size (inch) 9/16" max. hull thickness Vents air from your boat's fuel tank as you fill the fuel tank Splash-resistant, corrosion resistant Meets ABYC standard *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

No Slide Metal/Composite BonderRevolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.Features: Revolutionary Adhesive Parts Stay Where Placed Without Sliding For Use Overhead and on Vertical Surfaces No Need for Fixtures Quick Guide (pdf)Owner's Manual (pdf)

Read more less

No Slide Metal/Composite Bonder *Case of 10*Revolutionary Metal Bonder will hold heavy parts at application without sliding on a vertical or overhead surface. AT-8040 will hold 3,500 lbs in 40 minutes - no Welding, Drilling, or Tapping.Weld Mount AT-8040 is a solvent-free, VOC Compliant, two-part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, and composites to metals or various substrate combinations. It has excellent adhesion to as-received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steel. AT-8040 forms tough, high-strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.Features: Revolutionary Adhesive Parts Stay Where Placed Without Sliding For Use Overhead and on Vertical Surfaces No Need for Fixtures Case of 10 Quick Guide (pdf)Owner's Manual (pdf)

Read more less