Boat Outfitting

Turning Point Hub Kit: 11Features Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damageWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

12 V Heavy Duty Tab Actuator - 23' Cable Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator.  The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket.  Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates a standard or low profile transom mounting bracket. Features: Reinforced actuator upper mounting boss Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation All actuators fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Upper and Lower Mounting Bracket - NOT INCLUDED *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

Actuator Low Profile Upper Bracket Replacement upper bracket for the actuator.  Attaches to standard actuator upper cover boss with the bolt.*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Single Paddle Trim SystemSingle paddle kit including one paddle and the brackets to attach to a tilt or to a front mount helm.For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel. Available both in single and dual versions (for either two equal or two different outputs) Both single or dual paddle can be positioned at various angles for the most confortable choice Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version) Max load 5 Amp @ 12VDC For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay Uflex® trim tabs require the use of the KTR - 42860S kit relay Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”) Easy to install on the following Ultraflex® steering systems: - front and tilt mount hydraulic helms- tilt mount mechanical helmsWiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately

Read more less

UC128OBF Mounting HardwareMounting hardware for UC128TS Cylinder

Read more less

Blue Hose with Flex Relief - 25'HoseCoil 25' HP Self Coiling Hose with Flex Relief are lightweight, self-coling hoses. The hoses are built with standard 3/4" field serviceable soild brass fittings, and HoseCoil's newly upgraded (HP) high performance Polyether material. A HoseCoil hose is the the perfect solution for using and storing a hose.Features: Polyurethane Light Weight - Easy to use Self Coiling - Easy to stow 85-90% Usable Length - Excellent extendibility Solid Brass/Stainless Steel Connectors - Improved flow rate and rust free use 360 Gallons per Hour Flow Rate High Quality Brass or Stainless Steel Fittings *Replaces the HS2500U Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 6"W x 21"L WT: 1.9 lbs UPC: 659988107579

Read more less

Platinum 4" Multi-Function - Fuel, Oil, Volt & Water TemperatureFaria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.  All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.  Multi-Function Gauge Displays: Fuel (E-1/2-F) Voltmeter (10 - 18 VDC) Oil Pressure (0 - 80 PSI) Water Temperature (100 - 250° F) 4" - Hole size: 3.375" (85mm)Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GF0417 *Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: Platinum Gauge Type: Multifunction Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.65 lbs UPC: 759266220140 Brochure (pdf)

Read more less

Professional Red 2" Water Temp (100 to 250° F)Perimeter-lighted black dial with stylish Red and White graphics, Black aluminum bezel, tear- drop White pointer, and flat glass lens.A temperature gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, ect.As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.2"- Hole Size: 2.0625" (53mm)Specifications: Flat Glass Anti-fog, Scratch Resistant Lens Black Aluminum Bezel White Numeric Values with Red Increment Indicators White Tear Drop Pointer Dual Scale - Imperial and Metric Factory P/N GP7166*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Temperature Gauge Size: 2" Series: Pro Red Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266146044

Read more less

2" Oil Pressure Gauge - 80 PSIFaria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.  All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.  A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm)Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GP5089*Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Series: Platinum Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Gauge Type: Oil Pressure Box Set: No Box Dimensions: 3"H x 4"W x 4"L WT: 0.3 lbs UPC: 759266220249 Brochure (pdf)

Read more less

Chesapeake White SS 2" Trim Gauge f/Honda EnginesPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.2"- Hole Size: 2.0625" (53mm)For Engine Types:Honda EnginesSpecifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP7440*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Gauge Type: Trim Guage Series: Chesapeake White Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 759266138896

Read more less

Chesapeake Black 4" Tachometer - 4000 RPM (Diesel)  (Mechanical Takeoff & Var Ratio Alt)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens.Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N TD9127*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer - Diesel Box Set: No Series: Chesapeake Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266337428 Quick Guide (pdf)

Read more less

Kronos 2" Hourmeter (10,000 Hrs)Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are embossed.  Hourmeter operates by applying battery voltage across the gauge's register motor to ground. The register increments increase when the key switch in on. 2" - Hole size: 2.0625" (53mm)Specifications: Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Factory P/N MH0144*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Hourmeter Series: Kronos Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 5"W x 5"L WT: 0.3 lbs UPC: 759266190207

Read more less