Boat Outfitting

1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs.

Read more less

Auto Tab RetractorAutomatically retracts tabs when boat?s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them "full-up" during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily installed under the instrument panel, the ATR connects to the trim tab control and engine ignition switch.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Actuator Lower Hinge PinWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Actuator Lower HingeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

52MM (2-1/16") ViewLine Oil Pressure Indicator 0 to 150 PSI - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 12 - 24 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 2-1/16" Gauge Type: Oil Pressure Series: ViewLine Voltage - Input Range (Volts): 12/24 V Box Dimensions: 4"H x 5"W x 5"L WT: 0.45 lbs UPC: 7640178727472 Owner's Manual (pdf)

Read more less

Sikaflex® 505UV High Performance Exterior Grade Sealant - 10.3oz(300ml) Catridge - WhiteSikaflex®-505UV is a one-component silane terminated polymer (STP) with excellent UV and weathering resistance, and excellent adhesion to a wide variety of substrates.Uses:Sikaflex®-505UV is suitable for use on a wide variety of substrates; including aluminum, steel, glass, marble, wood and many different types of plastic.Characteristics & Advantages Contains no solvents or isocyanates Low VOC content Excellent tooling characteristics Fast curing even at low temperatures Easily paintable Non-yellowing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Seafood Bowl - 12" - Stainless Steel - 2 Layer Serving BowlServe seafood the way it was meant to be enjoyed—fresh, flavorful, and beautifully presented. This elegant, dual-purpose serving bowl is perfect for everything from chilled oysters to sizzling paella. The vented, two-layer design is self-draining and allows users to serve cold seafood over ice without the mess of puddling water. Flip the top layer to create a snug lid that keeps hot dishes warm while minimizing condensation. Whether users are plating cocktail shrimp, tuna tartare, or a steamy seafood medley, this bowl brings both function and sophistication to the table.Specifications: Construction: Stainless steel Bowl Base Size: 12.5” Bowl Height: 3.25” (first layer) Bowl Height: 1.75” (second layer) Quick Guide (pdf)Brochure (pdf)

Read more less

MOB Tag with White Quick Release BandProtect yourself with this wireless, wearable MOB tag. The tag can be worn on a wristband, carabiner, or key ring float.Specifications: Dimensions (HxWxD): 43.94 mm x 37.26 mm x 11.96 mm Wireless range: Up to 66 ft (20 m) Battery type: CR 2032 coin cell Battery life: >1,200 hours of connected time What's In The Box? Wireless MOB Tag CR2032 coin cell battery 20 mm Quick Release Band Carabiner with 20 mm Quick Release attachment Floating foam keychain Documentation

Read more less

16" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Bracket Mounting Disks - Quantity 6An aluminum backing support for a trolling motor mount is a 2-in. diameter disk made of 1/2 in. thick 6061-grade aluminum. The backing support is designed to provide additional reinforcement to the mounting area of the boat where the trolling motor is attached. Benefits of Using Mounting Disks: Load Distribution: Multiple backing supports can distribute the load over a wider area compared to a single backing plate Flexibility: Using multiple backing supports allows for more flexibility in positioning and alignment Accessibility:  Using multiple backing supports can make it easier to maneuver and install the components in tight spaces, as you can insert them one by one and secure them individually *When using these backing disks, it is important to always have a fender washer between the disk and the lock nut. These disks are designed to work with 1/4-20 Phil flat machine screws. Sea Brackets recommends using machine screws with coarse threads.

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - GraphiteThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Graphite can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

90° 3/8 NI Plate Comp FittingTypical Application:90° fitting from bulkhead fitting to 3/8" compression hose Specifications: 3/8 COMP FITTING Fitting Side =  9/16 - 24 UNEF 2B Hose Side =  9/16 - 24 UNEF 2A

Read more less