Boat Outfitting

Female GHT-Male Quick Connect with O-RingsFeatures: Female GHT Male quick connect  O-Rings Included *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 2"L WT: 0.05 lbs UPC: 817177021383 Brochure (pdf)

Read more less

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 12 x 18The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm) Boat Length - 20' to 40' (6 to 12 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 2"H x 4"W x 6"L WT: 20.25 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab with ALC-1 Control - 12 x 24 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 12" x 24" (30 x 61 cm) Boat Length - 28' to 48' (8.5 to 14.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 31.55 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 12 x 12 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 12" x 12" (30 x 30 cm) Boat Length - 18' to 32' (5.5 to 9.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 2"H x 4"W x 6"L WT: 15.35 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 12 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 12" (30 x 30 cm) Boat Length - 18' to 32' (5.5 to 9.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 19.25 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

Universal Leaning Post BackrestTaco Marine's Universal Leaning Post Backrest is designed to fit the Neptune Premium, Neptune II and most standard leaning posts available in the market. Arms fold for easy and convenient storage.Features: Universal design to fit Taco Marine's Neptune Premium, Neptune II and most standard leaning posts Arms install at desired width to fit rod holders Cool, white, easy-to-clean, cushioned backrest Arms fold for easy storage when not in use Hardware included 3 year limited warranty Made in USA This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Elite Lock - Single - Minn Kota QRB - SilverYour Minn Kota Anchor is a valuable investment—protect it effortlessly with the quick and easy installation of the Elite Lock from Secure Outdoors!The Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Elite Lock - Single - Power-Pole PV - SilverYour Power-Pole Shallow Water Anchor keeps you locked in place—now lock it securely to your boat with the Elite Lock from Secure Outdoors!The Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Elite Lock - Single - Power-Pole PV - BlackYour Power-Pole Shallow Water Anchor keeps you locked in place—now lock it securely to your boat with the Elite Lock from Secure Outdoors!The Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Elite Lock - Single - Minn Kota QRB - BlackYour Minn Kota Anchor is a valuable investment—protect it effortlessly with the quick and easy installation of the Elite Lock from Secure Outdoors!The Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

8 x 12 ft. White Sun Shade for Boats 26'+Sebba Shade stands out with its versatile design, providing a large coverage area and multiple positioning capabilities. This lightweight and easy-to-use shading solution not only offers convenience but also surprises with its unexpected functionality—it doubles as a floatie, making it an ideal companion for various outdoor activities.Note: The boat must have an existing T-top, arch, or bimini for Sebba Shade to attach properly.Inflate it & Shade itInflatable: Easy setup/take down.Portable: Used only when needed and comes with easy storage.Air Frame: Uses a high-pressure airframe instead of a metal frame.Easy Usage: No permanent hardware or professional installation is required.Quality: High quality, durable construction. Blocks 98% of harmful UVA/UVB rays.Risk-Free: Try for 30 days, and return it for a full refund if not satisfied.Pump Included: High pressure-dual action (inflates with both up and down strokes) hand pump.Features: Center section zips open to allow antenna, rod holders, radar, etc. to pass through Fasten to an existing T-top, arch, or bimini Safely handles speeds up to 45 mph Mildew resistant, abrasion resistant, tear resistant marine grade fabric Easily moved or tilted to block the sun Easy set up (no poles or drilling needed) Straps included Inflates in 2 minutes with included pump Specifications: Color: White Fits: Boats from 22’ to 30’+  Dimensions Inflated: 8’-4” x 12’-4” Dimensions Deflated: 24” x 14” x 12” Weight: 17 lbs. Max Speed: Safely handles speeds up to 45 mph Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

8 x 12 ft. Seafoam Sun Shade for Boats 26'+Sebba Shade stands out with its versatile design, providing a large coverage area and multiple positioning capabilities. This lightweight and easy-to-use shading solution not only offers convenience but also surprises with its unexpected functionality—it doubles as a floatie, making it an ideal companion for various outdoor activities.Note: The boat must have an existing T-top, arch, or bimini for Sebba Shade to attach properly.Inflate it & Shade itInflatable: Easy setup/take down.Portable: Used only when needed and comes with easy storage.Air Frame: Uses a high-pressure airframe instead of a metal frame.Easy Usage: No permanent hardware or professional installation is required.Quality: High quality, durable construction. Blocks 98% of harmful UVA/UVB rays.Risk-Free: Try for 30 days, and return it for a full refund if not satisfied.Pump Included: High pressure-dual action (inflates with both up and down strokes) hand pump.Features: Center section zips open to allow antenna, rod holders, radar, etc. to pass through Fasten to an existing T-top, arch, or bimini Safely handles speeds up to 45 mph Mildew resistant, abrasion resistant, tear resistant marine grade fabric Easily moved or tilted to block the sun Easy set up (no poles or drilling needed) Straps included Inflates in 2 minutes with included pump Specifications: Color: Seafoam Fits: Boats from 22’ to 30’+ Dimensions Inflated: 8’-4” x 12’-4” Dimensions Deflated: 24” x 14” x 12” Weight: 17 lbs. Max Speed: Safely handles speeds up to 45 mph Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less