Boat Outfitting

Silicone Rubber Tube - 2.8 FL. Oz - WhiteAn all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.

Read more less

SA1200S ActuatorBennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator, thus eliminating external hoses subject to damage.Features: Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders The piston-like arms push tabs into position Fluid flows through a concealed hole in the upper hinge at the top of the actuator Designed for installations where space is limited Eliminates external hoses subject to damage WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mercury Alpha 1 Gen 1 Anode KitContents: (1) 00806BISMG (1) 00800MG (2) 00807MG Material: MagnesiumPackaging: PolybagHardware: Included Specifications: Material: Magnesium Box Dimensions: 3"H x 5"W x 7"L WT: 1.05 lbs UPC: 8059617814526 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Chesapeake White SS 5" Multifunction Gauge Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.5" - Hole size: 4.375" (112mm) Multi-Function Gauge Displays: Fuel (E-1/2-F) Voltmeter (10 - 18 VDC) Oil Pressure (0 - 80 PSI) Water Temperature (120 - 220° F) Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems  Factory P/N GF4004*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Gauge Size: 5" Box Set: No Gauge Type: Multifunction Series: Chesapeake White Box Dimensions: 8"H x 8"W x 8"L WT: 1.6 lbs UPC: 759266338647

Read more less

Euro Black 4" Multifunction Gauge - Volt/Fuel/Oil/Water TemperaturePerimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens. Multi-Function Gauge Displays: Fuel (E to F) Volts (10 to 18 AMPS) Oil Pressure (0 to 80 PSI) Water Temp. (120 to 220° F) 4" Gauge - Hole size: 3.4" (86.36 mm)Features: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N GF0001*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Multifunction Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Series: Euro Black Box Dimensions: 5"H x 6"W x 6"L WT: 1.05 lbs UPC: 759266328518

Read more less

Deluxe All-Stainless Dual Trumpet Horn - 12V Features: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years. All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 18-1/2"L, 8"W, 5"H (47 x 20.5 x 12.5 cm) Max Amp Draw: 8 Amps Rating: 122 db@ 1 Meter Specifications: Voltage - Input Range (Volts): 12v Color: Stainless Box Dimensions: 4"H x 11"W x 21"L WT: 3.6 lbs UPC: 768170100288 Quick Guide (pdf)

Read more less

Aluminum Inboard Cylinder - 1.25" Bore & 7" StrokeA hydraulic steering system consists of a steering pump, a cylinder tied to the rudder or the outboard or sterndrive engine, and the connecting hoses. Under normal operating conditions, a steering wheel turn will pump the oil, which flows in through the hoses to the cylinder, according to the turn direction.With the consequent cylinder movement, the oil will flow to the pump through the hoses and, at the same time, move the engine or the helm, which are connected to the cylinder. The pumps, equipped with a valve that prevents outgoing fluid from returning along the same hose, allow the operation of the steering systems with two or more steering stations. The cylinders are double-acting and may be balanced or unbalanced. This particular cylinder is a balanced cylinder with the same number of steering wheel turns to move the helm from the center to the end stroke in two opposite directions. A well-balanced steering system needs the correct choice of pump for the cylinder.This hydraulic cylinder for the inboard engine UC 116-I has been designed and manufactured to be used as a component in the hydraulic steering systems. The cylinder with a mobile rod is installed directly to the arm of the helm through the proper ball joint on the end part of the cylinder. On the opposite side, it is fixed directly to the boat through a support with the plate.Features:Balanced (the number of turns lock-to-lock is equal to port to starboard or vice versa)Specifications: Volume: 116 cc - 7 cu.in Torque: 58 kg (5043 lbs.) Output Force: 464 kg (1023 lbs) Owner's Manual (pdf)

Read more less

Single Lever Side Mount Control - Black/ChromeFeatures: Enables easy and safe shifting by preventing accidental gear engagement unless the engine is idling Can be installed horizontally or vertically, on the starboard or port side of the boat Provided with a brake tension release system adjustable from outside Pull-out handle disengages shift for warm-up Neutral safety switch X12 - 34543 Q (optional) prevents in-gear starting Exceeds EN ISO 11547 standards when X12 safety switch is installed

Read more less

SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 CylinderSpecifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering.Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate).  The end-mounted fittings keep the hydraulic hoses free and clear.SilverSteer™ Package Kit Contains:UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder) Quick Guide (pdf)Brochure (pdf)

Read more less

Combo Dash Pocket - Mocha/BlackThe SeaDek Combo Dash Pocket features a cell phone pocket and an extra cut-out for additional storage.Features: Keeps phones and other items stored safely Adheres directly to the dashboard Secures personal items, big or small Specifications: Color: Mocha/Black Overall Dimensions: 15.1″ x 9.9″ Pocket #1 Dimensions: 4.5″ x 7.5″ Pocket #2 Dimensions: 7.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

40" x 80" 6mm Teak Full Sheet - Brushed Texture - Storm Grey/Dark Grey (1016mm x 2032mm x 6mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet has a modern brushed texture and non-skid qualities for optimal comfort.Features:2.5″ Teak line spacingSpecifications: Color: Storm grey/dark grey Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed

Read more less

Large Helm Pad - Caribbean Blue/Storm GreyAre you tired of a throbbing back or knees after a long day of fishing?  Our Helm Pads will be your go-to anti-fatigue pad for longer and more comfortable days on the water.  Helm Pads are the perfect way to add extra comfort and protection to your boat’s helm.SeaDek's softest, most comfortable Helm Pad yet.  Your knees and back will thank you after a day on our Dual-Density helm pad.  No boat is complete without this essential addition, featuring an ultra-comfortable, low-density .67" foundation with our legendary standard .1" brushed top layer for traction and durability. The Dual Density Helm Pads utilize a 3M adhesive for an easy peel-and-stick installation.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Caribbean Blue/Storm Grey Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less