Trim Plate Retrator for ST TabsThe PR500 Bracket assembly enables Lectrotab SMART TABS to be set in two different positions without the need for any additional tools. When the bracket handle is in the “Down” position, the SMART TABS will function as trim tabs. When the bracket handle is in the “UP” position, SMART TABS will be fully retracted. The brackets are ideal for use when storing a boat, beaching a tender, or in very shallow water conditions, such as those found near the beach. Replaces the standard transom bracket.
MKA-64 Quick Release BracketEasily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors.Features:
Designed to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck
The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
The locking handle can be secured with a padlock (not included) for additional security
Designed for use in freshwater
XKA Aluminum Alloy Trim Tab Kit with Rocker Switch - 12 x 24 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats. All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge. All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket. Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking. Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run. Features:
All Tabs sealed with a corrosive resistant epoxy coating
Equivalent strength to 10 gauge stainless steel
"No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 12" x 24" (30 x 61 cm)
Boat Length - 28' to 48' (8.5 to 14.5 M)
Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
Rocker Switch Operating Voltage - 12 or 24 V
In the Box:
One (1) Flat Rocker Switch
Two (2) Aluminum Alloy tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit Specifications:
Actuator Type: Electro-Mechanical
Construction: Aluminum Alloy
Box Dimensions: 4"H x 5"W x 6"L WT: 23.95 lbs
Owner's Manual (pdf)Brochure (pdf)
Light Diffuser for Type D Peanut Bulb - Red - 4 PackFeatures:
Red in color
Application - Type D Peanut Bulbs
*Sold as a 4 PackWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red
Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs
UPC: 754059005980
52MM (2-1/16") OceanLink Rudder Angle Gauge - Left/Right - White Dial & BezelOceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection. Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together. Interchangeable bezel option. Features:
AMP Superseal Easylink
270° pointer deflection angle
Reverse polarity protection
Anti-fog double lens
Front & rear protection rating IPX5
Operating temperature range -20 °C / +70 °C
Nominal voltage - 12/24V
Hole diameter - 52MM
In the Box:
Gauge
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Size: 2-1/16"
Voltage - Input Range (Volts): 12/24 V
Box Set: No
Gauge Type: Rudder Angle
Series: OceanLink
Box Dimensions: 4"H x 5"W x 6"L WT: 0.35 lbs
UPC: 7640178721456
Type E -Red LED Wedge Bulb Colored, long life LED bulbs are designed to fit in traditional wedge based bulb sockets. In addition to adding a dash of style, these LED bulbs draw less power, last 20,000 hours or more and operate at cooler temperatures.Features:Color - Red*Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red
Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs
UPC: 754059057415
3/8" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the FootTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:
Sold by the foot
Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Applications:
Marine Fuel Hose (distribution, return, vent and transfer)
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Specifications:
Inner Diameter: (inch) 3/8" / (mm) 9.50
Outer Diameter: (inch) 0.681 / (mm) 17.3
Burst Pressure: (psi) 400 / (mpa) 2.76
Working Pressure: (psi) 100 / (mpa) 0.69
Bend Radius: (inch) 2" / (mm) 50.8
Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233
Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10)
*The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
ID Diameter (inches): 3/8"
Length (Feet): Sold By The Foot
Box Dimensions: 1"H x 1"W x 1"L WT: 0.17 lbs
Quick Guide (pdf)
HYCO 1.1T Front Mount OB Tilt Steering up to 150HPThe Hyco 1.1T With Tilt Hydraulic Steering Kit is all you need for a complete steering system. This system is used on all engines up to 150HP or less. If engine H/P exceeds 150 then the Protech packaged system must be used.Package Kit Includes:
1-UP20T Tilt Helm Pump
UC95-OBF/1 Front mount Hydraulic Cylinder
2 quarts of Oil-15 Hydraulic Oil
Installation and Instructions manual included
*Premade Hose Kit 2' to 30' ft. length is not included and steering wheel not included.Please Note: There are two Cylinders offered, the UC95-OBF/3 model is for Honda BF115 and BF130 engines and Mercury Optimax 75, 90, and 115 HP engines only, and the UC95-OBF/1 is used on all other O/B models.
ATLAS™ 10" Hydraulic Jack Plate Standard - Black AnodizedThe Atlas revolutionary design meets the demands of today's high performance outboards. The one piece design, featuring the innovative Rod and Slot lifting system, will handle the stresses from the heaviest and most powerful outboards, up to 300 HP or 625 pounds, on the market today. All of the hydraulics are built into the jack eliminating the necessity of installing pumps and reservoirs inside the transom. The all new hydraulic unit is fast too..lifting from bottom to top in 8 seconds!WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Speed Detailer - 32oz *Case of 6*303 Speed Detailer is a premium formula designed to instantly clean, protect and produce a high-gloss finish on surfaces. It cleans, protects and shines fiberglass, paint, plastics, metals, and glass. Quick and easy to use, simply mist on and wipe off. Anti-static, repels dust, dirt and stains and helps protect against light surface scratches. 303 Speed Detailer is engineered with powerful UV blockers, to prevent fading of your boat’s paint. 303 Speed Detailer wipes dry with no streaking or hazing, leaving a high gloss finish instantly. If you want the shine that your boat deserves, reach for 303 Speed Detailer. It’s simple and easy to use.Features:
Anti-static, repels dust, dirt and stains
Protects against light surface scratches
Powerful UV blockers protect your boat between washes and prevents paint fading
Quick and easy application
Made in the U.S.A.
*Sold as a Case PackWARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Waxes & Polishes
Box Dimensions: 3"H x 5"W x 12"L WT: 13.5 lbs
Marine Speed Detailer - 32oz303 Speed Detailer is a premium formula designed to instantly clean, protect and produce a high-gloss finish on surfaces. It cleans, protects and shines fiberglass, paint, plastics, metals, and glass. Quick and easy to use, simply mist on and wipe off. Anti-static, repels dust, dirt and stains and helps protect against light surface scratches. 303 Speed Detailer is engineered with powerful UV blockers, to prevent fading of your boat’s paint. 303 Speed Detailer wipes dry with no streaking or hazing, leaving a high gloss finish instantly. If you want the shine that your boat deserves, reach for 303 Speed Detailer. It’s simple and easy to use.Features:
Anti-static, repels dust, dirt and stains
Protects against light surface scratches
Powerful UV blockers protect your boat between washes and prevents paint fading
Quick and easy application
Made in the U.S.A.
*Sold as an IndividualWARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Waxes & Polishes
Box Dimensions: 3"H x 5"W x 12"L WT: 2.25 lbs
UPC: 082043317505