Boat Outfitting

Foam Deck Zoap® Cleaner - 32ozFeatures: Specially designed to clean EVA foam, Polyethelyne foam, Vinyl and PVC decks Cleans without abrasives Cleans stubborn deck stains including grease, algae, fish blood and other tough stains

Read more less

Boat Zoap - GallonThe most popular boat cleaner in the world. All-purpose, non-caustic cleaner that works well in fresh or salt, hot or cold water. Removes gull droppings and harbor scum. Great for washing greasy pots, pans, stoves, sinks and dishes. Excellent for washing sails. 100% biodegradable earth-friendly formula Specifications: Type: Washes Box Dimensions: 6"H x 6"W x 13"L WT: 8.8 lbs UPC: 898286002043

Read more less

15' Self Coiling HoseFeatures: Polyurethane Light Weight - Easy to use Self Coiling - Easy to stow 85-90% Usable Length - Excellent extendibility Solid Brass/Stainless Steel Connectors - Improved flow rate and rust free use 360 Gallons per Hour Flow Rate High Quality Brass or Stainless Steel Fittings Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 6"W x 14"L WT: 1.1 lbs UPC: 659988107562

Read more less

Steering Trim Control UnitTrim Switches on the Steering Wheel Improve Safety and Performance. This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel.Features: Puts trim switches on steering wheel for convenience and safety Allows driver to keep both hands on the steering wheel Mounts easily on steering wheel spokes Weatherproof rubber booted switches Rugged urethane coiled cord Can be used for trim control or jack plate control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Switches Box Dimensions: 2"H x 5"W x 7"L WT: 0.6 lbs UPC: 733572001105

Read more less

12x9 Performance Sport Tab SystemManufactured with heavy-gauge reinforced stainless steel and powerful hydraulic actuators. Performance Tabs combine strength, durability, and good looks to achieve your boat’smaximum potential.Features: Get on plane fast and stay on plane at intermediate speeds Correct listing and uneven loads Reduce pounding and eliminate porpoising Improve visibility and safety Low maintenance with long-term value What's Included? (2) Trim plane assemblies (2-4) Hydraulic actuators (A1101ARC) (1) Hydraulic power unit (V351HPU1) Hydraulic tubing and hardware Optional helm control (See the Control Options tab) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bolt Kit for Jack PlatesFeatures: For Mounting Outboard to Plate Kit Contains: 4 each 1/2” x 3” stainless steel long bolts, 4 each 1/2” lock nuts – brass with nylon insert, 8 each 1/2” flat washers - stainless steel

Read more less

ATLAS™ 12" Set Back Hydraulic Jack Plate - Heavy DutyT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Combo Kit with ELCI Sensor & 50 Amp Breaker Non-Metallic Door - WhiteFeatures: White Sensor 50 Amp Breaker WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 50a Type: Misc Box Dimensions: 6"H x 6"W x 9"L WT: 2 lbs UPC: 682500440847 Brochure (pdf)

Read more less

Waetherproof CoverWeatherproof cover w/threaded ring - use with 6360CRN or 6364CRN(female connector)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 3"H x 3"W x 5"L WT: 0.4 lbs UPC: 093344008214

Read more less

3/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - BlackTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 3/4" / (mm) 20 Outer Diameter: (inch) 1.15" / (mm) 29 Working Pressure: (Psi) 100 / (bar) 6.9 Bend Radius: (inch) 1" / (mm) 25 Weight: (Lb./50ft.) 23 / (Kg/m) 10.3 *Burst Pressure is 4 x Working Pressure Quick Guide (pdf)

Read more less

ID 45 Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsSilicone and Rubber Elbows and Hump Hose Bellows provide the ultimate flexible connectors for Marine Wet Exhaust Systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space. Highest max. continuous operating temps.Specifications: Sizes: 2" to 18", 50.8 to 457mm Colors: Black, Blue & Red Packaging: Bulk or Boxed with 4 Stainless Steel, T-bolt Clamps

Read more less

Horizontal Mount Enclosure with Additional 5' Feeder HoseFor installing a washdown hose on our boat, home or spaHoseCoil's Horizontal Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 5' HoseCoil constructed of high performance polyether material. HoseCoil features solid brass fittings and an adjustable brass nozzle with a rubber grip and rubber tip for fiberglass protection.The Horizontal Mount Enclosure can be used to plumbed directly into your existing pressurized water system or raw water washdown pump. Included is a 5' feeder hose for direct connection to an external water spigot. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 11"W x 23"L WT: 4.5 lbs UPC: 659988116823

Read more less