Clear Coat - 400mlPropOne Clear Coat is part of the PropOne System. The Clear Coat is a non-biocidal, low surface energy coating which prevents organisms from strongly adhering to the surface of the propeller and running gear components permanently immersed in water. The Clear Coat does not prevent marine growth by leaching biocides into the environment.NOTE: This product is the PropOne Clear Coat only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear. It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.
4" Gauge BlankCover a 4" gauge hole with Faria's Gauge BlankSpecifications:
Fits standard hole for Faria's 4" gauges
Black in color
∗ Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Diameter (mm): 102
Diameter (Inches): 4
Color: Black
Box Dimensions: 5"H x 5"W x 6"L WT: 0.4 lbs
UPC: 759266328617
Prop Wash - 1 LitreLooking to get the best out of your PropOne application? Use Prop Wash to thoroughly clean your metal surfaces. PropWash is designed to thoroughly clean your bronze and stainless steel surfaces, removing contamination that you can’t see. This ensures that your metal surfaces are properly prepared for a new PropOne application.Features:
Recommended preparation cleaner before the PropOne application.
Necessary for new or reconditioned metal surfaces.
Removes contaminants you can’t see, improving PropOne system adhesion.
Brightens underwater metals, leaving them looking brand new.
Do not use on anodes or polished metal surfaces!
Paint Stripper - 200mlRemove old PropOne coatings from your propellers and running gear with ease using PropOne Paint Stripper and Silicone Remover.Features:
Easy application – Brush on and it will do the rest!
Reduce dust and noise – Easy removal
Effectively allows multiple stubborn layers to be removed
Marine Grade: DCM & NMP free*
PropOne Silicone Remover is designed to remove PropOne Clear Coat. It can also be used as a general-purpose silicone remover to remove thin coatings.PropOne Paint Stripper will remove paints, varnishes, and lacquers. It is primarily to be used with PropOne Silicone Remover for the removal of PropOne Primer Coat.Do not use on plastic surfaces or resin-impregnated wood fibreboard materials.For plastics and other delicate surfaces, test a small area first to ensure Silicone Remover & Paint Stripper does not affect the underlying substrate.Application:
Apply Paint Stripper approximately 2mm thick using a brush or roller
Leave in contact for at least 15 minutes or until softened
Scrape off the coating with slight pressure and appropriately dispose of waste. A wire brush, strong scourer, or paint scraping tool is recommended.
If any coating remains after scraping, apply a second coat.
Wipe off any remaining residue with an acetone-soaked cloth, then hose down the surface to leave a bright metal surface.
*Does not contain toxic Dichloromethane and N-Methylpyrrolldone
Underwater Light Coating (ULC) 70mlKeep Your Lights Bright and Clean. PropOne ULC is an optically clear, foul-release coating that prevents organisms from adhering strongly to underwater light lenses.With minimal maintenance and a simple, one-coat application process, you’ll spend less time cleaning your lights and more time enjoying them.The ULC can be applied to glass and polyamide lenses as well as surrounding brass and plastic/composite light fittings. When not in use, the surface will become colonized by encrusting organisms, but they can be easily removed by cleaning with a soft sponge or wiping with a gloved hand.The ULC does not chemically poison the environment to prevent marine growth.
Silicone Remover - 200mlRemove old PropOne coatings from your propellers and running gear with ease using PropOne Paint Stripper and Silicone Remover.Features:
Easy application – Brush on and it will do the rest!
Reduce dust and noise – Easy removal
Effectively allows multiple stubborn layers to be removed
Marine Grade: DCM & NMP free*
PropOne Silicone Remover is designed to remove PropOne Clear Coat. It can also be used as a general-purpose silicone remover to remove thin coatings.PropOne Paint Stripper will remove paints, varnishes, and lacquers. It is primarily to be used with PropOne Silicone Remover for the removal of PropOne Primer Coat.Do not use on plastic surfaces or resin-impregnated wood fibreboard materials.For plastics and other delicate surfaces, test a small area first to ensure Silicone Remover & Paint Stripper does not affect the underlying substrate.Application:
Remove all marine growth from the surface.
Apply Silicone Remover approximately. 2mm thick using a brush. Tip: Prevent drying out by covering the treated area with cling wrap in hot/windy climates.
Do not allow the remover to come in contact with water.
Leave in contact for 2-3 hours or until softened.
Remove with a stiff nylon or wire brush, scrubbing in a circular motion.
Wipe off any remaining residue with a xylene or toluene-soaked cloth.
If any coating remains after scraping, apply a second coat.
Once done, proceed with Paint Stripper
*Does not contain toxic Dichloromethane and N-Methylpyrrolldone
30A 125V Power Inlet303SSEL-BProduct Features
Solid cast 316 stainless steel
Locking waterproof cap
Easy Lock System
Soft Touch cap stays open in the upright position
8-way right angle rear safety enclosure
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Inlets
Box Dimensions: 4"H x 6"W x 9"L WT: 1.25 lbs
UPC: 093344300172
Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
MKA-57 Quick Release BracketThe bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments.Features:
Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows trolling motors to be quickly removed from and reattached to the boat deck
The dual Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, a lanyard, and a locking pin
Upper and lower plates include slots for securing with a padlock (not included) for added security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
12" Set Back Electric Jack Plate with Smart Control - White CerakoteThe IMPULSE brand represents a fundamental shift in the way we think about Jack Plates. Purposefully designed, with features for both the modern angler and the performance junkie, the IMPULSE brand is about to make some serious waves in the Jack Plate market.IMPULSE Jack Plates are all electric which means they are cleaner, greener, and more energy-efficient than their hydraulic counterparts. They also won't bleed down and require no messy fluids or hoses!The IMPULSE features a modular design which creates a more open area for mounting without the need for setback spacers.Unlock the true potential of your IMPULSE Jack Plate without out SMART Control Kit which adds an incredible set of features including a Smart Remote that doubles as a digital gauge!
Display - The IMPLSE Smart Remote utilizes a SHARP® Memory In a Pixel LCD. Embedded, 1-bit memory in every pixel allows for an always-on display that leverages ambient light to create a high-contrast, high-resolution image in all light conditions.
MEMORY BUTTONS - The Smart Remote allows the user to program up to 3 precise memory positions that can be triggered with the push of a button. This allows you to keep your hands off your jack plate control and back on the wheel as much as possible.
TRAILER BUTTON - Another industry-first: a 4th programmable button installed on the frame of the jack plate, allowing you to put your jack plate at the perfect trailering height without having to climb back in the boat.
Rated for outboards up to 250HP Owner's Manual (pdf)
Brake Maintenance KitJust like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again.Kit Includes:
(2) Bronze Brake Legs with Brake Pads
(1) Cotter Pin
(1) Stainless Steel Washer
(1) Nylon Bushing
(1) Removal & Installation Instructions
Type E Wedge Based Bulb - 12V - 4 PackFeatures:
Voltage: 12V
Watts: 3.4W
Color - White
* Sold as a 4-PackWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: White
Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs
UPC: 754059005867