8" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 8” / (mm) 203
Outer Diamter: (inch) 8.74" / (mm) 222.0
A: (inch) 2.25” / (mm) 57.2
B: (inch) 2.25” / (mm) 57.2
C: (inch) 8.25” / (mm) 209.5
W: (inch) 0.37” / (mm) 9.4
Elbow Degree: 45 degrees
Weight: (Lb/Ea) 4.3 / (Kg/Ea) 1.95
Quick Guide (pdf)
316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications:
Band & Housing: 316 stainless steel 3/4 in. wide band
T-Bolt and Nut: 18-8 stainless steel with nylon insert
Hose Inner Diameter (inch): 1-7/8" to 2"
Hose Outer Diameter (inch): 2.28" to 2.59"
Quick Guide (pdf)
52mm (2-1/16") ViewLine Fuel Tank Level Gauge - 0 to 1/1 - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use. ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features:
8 pole Tyco/Hirschmann MQS plug
Red LED Via Plus And Min Warning Light
Operating voltage 12 - 24 V
Input signal: standard Ω values
Optional make-point switch can be connected
Reverse polarity protection
Anti-fog double lens
Front side protection rating IP67
52 mm installation diameter
50 mm installation depth
In the Box:
Gauge
Connection Cable
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Voltage - Input Range (Volts): 12/24 V
Series: ViewLine
Gauge Type: Fuel Level
Gauge Size: 2-1/16"
Box Set: No
Box Dimensions: 2"H x 4"W x 4"L WT: 1 lbs
UPC: 7640178722897
Owner's Manual (pdf)
Glass & Mirror Microfiber Towels - 12-PackMicrofiber towels lift and trap dirt, moisture & grease, unlike regular cotton towels, which just push contaminants across the surface. These towels are extremely soft, gentle, and super absorbent so they won't scratch. Microfiber towels are great for Washing, Waxing & Polishing all around your Boat, Car, RV & Home.Use on:
Fiberglass
Glass Windows & Mirrors
Plexiglas & Eisenglass
Sold Surface Counters
and much more...
Leave your surfaces streak free every time!Three easy steps: wet it; wring it; wipe it!They can be washed up to 500 times and still retain their softness. Machine washable, but DO NOT use fabric softener. Specifications:
Type: Tools & Accessories
Box Dimensions: 2"H x 9"W x 16"L WT: 1.5 lbs
UPC: 703485120286
Microfiber Towels Variety - 3-PackMicrofiber towels lift and trap dirt, moisture & grease, unlike regular cotton towels, which just push contaminants across the surface. These towels are extremely soft, gentle, and super absorbent so they won't scratch. Each of the microfiber towels in the three-pack has a different purpose The dark blue towel is super soft for polishing and shiningThe yellow towel is extra strong for washing and cleaningThe light blue towel is lint free for cleaning and wiping glass and mirrors Three easy steps: wet it; wring it; wipe it!They can be washed up to 500 times and still retain their softness. Machine washable, but DO NOT use fabric softener. Specifications:
Type: Tools & Accessories
Box Dimensions: 2"H x 6"W x 18"L WT: 0.35 lbs
UPC: 703485002933
Starting Fluid - 11ozSTA-BIL® Starting Fluid is a special formula starting fluid with upper cylinder lube and corrosion inhibitor. STA-BIL® Starting Fluid is safe for oxygen sensors and catalytic converters. It is for use in all gasoline and diesel engines in cars, trucks, tractors, buses, marine engines, lawnmowers, snowmobiles, snow blowers, and construction equipment. This starting fluid saves starters and batteries by helping get engines started quickly. This product comes in a convenient 11 ounce aerosol can. Features:
High ether content delivers faster starts, even on stubborn engines
Works down to -65 degrees F (-54 degrees C)
Contains upper cylinder lubricant and corrosion inhibitor. Will not harm catalytic converters or oxygen sensors
Saves starter and battery by helping to get engines started quickly, with any fuel amount
Made in the U.S.A.
WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Engine & Fuel
Box Dimensions: 3"H x 3"W x 8"L WT: 0.9 lbs
UPC: 073905220040
Marine Fabric Guard - 1 Gallon303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more. When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.Features:
Fabric protector spray that strengthens and restores lost water repellency for marine fabrics
Safe for synthetic and natural fibers in marine environments
Protects against both water-based and oil-based stains
Does not alter fabric color, feel, flammability or breathability
Recommended by leading outdoor fabric manufacturer
Made in the U.S.A.
*Sold as an Individual WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Fabric & upholstery
Box Dimensions: 5"H x 7"W x 11"L WT: 6.7 lbs
UPC: 082043006706
Limited Space Trim Tab Kit- Standard Actuator 12-Volt ActuatorsLenco Electric Limited Space Trim Tab Kits are engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. For boat lengths 14' to 25'. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" diameter hinge pin. Upper and lower high-impact corrosion-proof mounting brackets with mechanical cable gland seal. Kit Contents
2 each of 11-gauge 304 stainless steel trim tab blades
2 each of #15054-001 Standard actuator with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting bracket with gland seal
1 each of the Lenco owner's / installation manual
All necessary stainless steel mounting hardware
Specifications
Trim Tab Kit: Limited Space
Blades: 11 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Made in: Stuart, Florida U.S.A.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Actuator Type: Electro-Mechanical
Construction: Stainless Steel
Box Dimensions: 6"H x 7"W x 13"L WT: 13.8 lbs
UPC: 874847007108
Brochure (pdf)
Marine Kettle® Charcoal Grill - 15"Our time tested original charcoal Marine Kettle® grill now has a hinged lid. Made in the U.S.A., it is meticulously crafted of 100% 18-8 mirror polished stainless steel for maximum corrosion resistance. Our rotating design allows you to determine which direction you would like the lid to open when grilling in windy conditions. You obtain perfect results through use of the adjustable height cooking grill and the variable temperature control draft door assembly. Our Marine Kettle® design allows oven type baking to enhance the grill flavor while retaining the natural juices of the food. It will cook more food faster, on less grill area, than any other charcoal grill. Safety and efficiency are obtained by closing the draft door and extinguishing the coals for future use. Magma’s large selection of mounting options and accessories allows you to customize your grill for your specific on-board or on-shore application. *Mount not included. Features:
Heat resistant "Stay Cool" plastic handle with air cooled supports
Perfectly balanced hinged lid, won't slam shut
Adjustable height cooking grill and variable draft door assembly, for superior temperature control
Lower charcoal grate and sealed ash compartment
Technical Specifications:
Material - 18-8 mirror polished marine grade Stainless Steel
Mounting Application - Marine Kettle® Mounts
Primary Cooking Grate - 15" (38.1 cm)
Total Cooking Area - 177" Sq. In. (1141.9 sq. cm)
Dimensions w/valve attached and lid/legs closed (L x W x H) - 14-7/8" x 14-7/8" x 11" (37.8 x 37.8 x 27.9 cm)
Weight - 7.92 lb (3.6 kg)
Fuel Type - Charcoal
*Sold as an Individual Quick Guide (pdf)Owner's Manual (pdf)
Sender Fuel Level (American 8"-16") (Single)Features:
8 to 16 in. Fuel Level Sending Unit
8 in. to 16 in. tank depth
Single station
For use with US OHM scale gauges
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
9"x12" STD Trim Tab Kit with Pro Control™ AutoSpecifications:
Length x Width: 9"x12"
Boat Length: 16'-25'
Hinge Height: 2" (5.1cm)
Minimum Transom Height: 14" (35.6cm)
Keypad: Auto
Kit Includes:
(1) Pro Control Auto Keypad Kit (15174-107)
(1) Pro Control Auto IMU (15180-001)
(2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades:
Standard blades - with a 5/8" (1.6 cm) flared trailing edge.
Edge Mount blades - with 1" (2.5 cm) turned-up edges a 5-degree taper on both sides to the trailing edge) and a 1/8" (3.2 mm) diameter hinge pin.
(2) 2.25” Stroke SD Pro Actuators, 11.5” pin to pin (15189-001)
(6) Micro C Tee Connector (30267-001DD)
Micro C Power Cable with Fuse and Ground (15197-101)
(2) 6’ (1.82 m) Micro C Drop cables (15199-101), (1) 15’ (4.57 m) (30269-001 and (1) 25’ (7.62 m) (30269-004) Micro C Drop cables
(2) 6 Pin Deutsch to Micro C Actuator Network Adapter Cable (30377-001)
(2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001)
(1) Wake Signal Adapter for Non-Mercury Systems (15207-101)
(2) Corrosion proof Upper Mounting Brackets with gland seal (15193-101)
(2) Corrosion-proof Lower Mounting Brackets (15194-101)