Antenna Cable for Cortex® V1 & M1Use this 32 ft cable to connect your antenna to your compatible Cortex VHF and AIS.Features:
Cable fitted for Cortex® V1 & M1
32' cable
Specifications:
Type: Cables
Box Dimensions: 2"H x 6"W x 6"L WT: 0.8 lbs
UPC: 753759319311
10" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates. Features:
Provides Improved Hole Shot
Reduces Water Drag at Take Off
Reduces Porpoising
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
NMEA 2000® Male Terminator Standard NMEA 2000® Male Terminator to be used with CAN BUS, Acqualink and OceanLink Gauges and Equipment.*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Quick Connect Trigger NozzleFeatures:
Multiple flow control settings
Quick connect hose/trigger nozzle
Can work with both fresh and saltwater
Designed for use with washdown pumps
Straight Adapter - 15A Male Straight Blade to 50A 125/250V Female LockingStraight Adapters are high-quality, one-piece adapters similar in usage to Pigtail Adapters. However, they do not have sealing collars and are not recommended for use in wet locations. Use only in an enclosed, dry location, such as powering your boat from a 15A power receptacle inside your house.Features:
Includes power LED
Marine-grade construction
Not recommended for use in wet locations
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Straight Adapter
Box Dimensions: 3"H x 4"W x 8"L WT: 0.6 lbs
UPC: 093344060588
3/8" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - GrayThis hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. Features:
Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone
Also, provides excellent rope-like bend-ability and fitting retention
For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)
EPA Certified and CARB Executive Order for low permeation Type B1-15
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Fluoroplastic Internal Barrier
Cover: Gray CPE Rubber
Reinforcement: 2-Spiral Polyester Plies
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50’ (15m) Boxed
Specifications:
Inner Diameter: (inch) 3/8" / (mm) 9.50
Outer Diameter: (inch) 0.588 / (mm) 14.9
Burst Pressure: (psi) 175 / (mpa) 1.21
Working Pressure: (psi) 35 / (mpa) 0.24
Bend Radius: (inch) 4" / (mm) 101.6
Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156
Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0
*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15 Quick Guide (pdf)
Turning Point Hub Kit: 502Features
Lifetime Warranty
Never buy another hub kit system again
Inner splines adapt to the engine
Outer hub compatible with different props
Reduce gear shock & engine/drive damage
Save up to 30% when purchasing a replacement prop
Eliminate propeller vibration & chatter
Eliminate hub cracking & failure
Corrosion resistant materials - brass splines
Reduce gear shock & engine/drive damage
Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
Also adapts to all Michigan Wheel® and Mercury® interchangeable propellersWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)
Turning Point Hub Kit: 25Features
Lifetime Warranty
Never buy another hub kit system again
Inner splines adapt to the engine
Outer hub compatible with different props
Reduce gear shock & engine/drive damage
Save up to 30% when purchasing a replacement prop
Eliminate propeller vibration & chatter
Eliminate hub cracking & failure
Corrosion resistant materials - brass splines
Reduce gear shock & engine/drive damageWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)
Handle Telescoping - 6-11' w/Boat HookEasily get to those hard-to-reach areas on your RV, boat, home, and more with Camco's adjustable-length multi-purpose handles. They feature an ergonomic teardrop design for comfortable use. Anodized aluminum construction resists rusting, and the TPE hand grip gives you a secure and comfortable grip. Patented.Features:
Adjustable 6-11 ft. length
Ergonomic tear-drop design
Easily wash higher areas on your RV, boat, home, etc.
Anodized aluminum construction
TPE hand grip
Marine Formula™ 10oz AerosolMarine Formula™ is a specially formulated patented mixture that cleans and removes adhesives and sealants on and inside the boat. Use Marine Formula™ to clean up and remove these common marine adhesives and sealants. Quick Guide (pdf)
Water Temperature Sensor - M16x1.5 Thread - 120°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features:
Function - Oil temperature, coolant temperature
Length - 28.5mm (1-1/8")
Thread - M16x1.5
Calibration - 120°C
Measurement Range - 120°C
Output Signals - Resistive
IP67
Insulated ground pin
Quick Guide (pdf)
Engine Oil Temperature Sensor - 1/2"-14NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features:
Function - Oil temperature, coolant temperature
Length - 28.5mm (1-1/8")
Thread - 1/2"-14NPT
Calibration - 150°C
Measurement Range - 150°C
Output Signals - Resistive
IP67
Insulated ground pin
Quick Guide (pdf)