Boat Outfitting

Single Channel PoE Injector - 8-36VDC Input Voltage & 48VDC OutputSimplify your installation by only running a single CAT5 cable to your IP camera or other PoE network device.The IRIS-PoE1 is a compact single-channel power over Ethernet (PoE) injector designed and certified, especially for use in marine applications. Simply connect your camera or PoE device with a single CAT5 cable to the injector and connect the injector to your onboard network. The IRIS-PoE1 uses high-end buck-boost power management to facilitate IEEE802.3aF PoE operation across an extremely wide 6–36VDC input range, making it perfect for environments where input voltage may not be stable or where the required 48VDC is not available.Features: Inject DC power into a single device Wide Voltage range – 6-36VDC Input Delivers up to 48VDC IEEE802.3af Compliant Small form factor with molded fixing points Simple to install and reliable, the IRIS-PoE1 features plug-and-play functionality and requires no setup. Specifications: Dimensions (millimeter): 92mm x 84mm x 38mm Weight (grams): 144g Connections: CAT5 device in / output to network, a 4-pin screw terminal for DC input Input Voltage: 8-36VDC Power: 16.8W The IRIS-PoE1 Gigabit Ethernet Injector has been fully certified to comply with the following standards for use in the marine industry: IEEE802.3af EN60945 EN55022 (Class B) EN50155 UL1950, XSA 22.2 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Taper-Lock™ Manual Adjust Post - 21" to 31" for 2-3/8"2-Piece Manual Adjustable Set Includes:  2-3/8″ Manual Adjustable Post With Posi-Lock System Trac-Lock™ Non-Locking Swivel (3100031-1) Use With Any Taper-Lock™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12V Heavy Duty Tab Actuator - 6' Cable for Everglades Boats Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy-duty trim tab actuator. Lectrotab heavy-duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion-free, ensures precise tab positioning, provides maximum lift force, and is completely self-contained for easy installation. The actuator assembly is packaged in a non-metallic, permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low-profile transom mounting bracket. Compatible With:Everglades Boats  Features: Reinforced actuator upper mounting boss The upper ram seal location cannot be damaged due to a fouled ram or barnacle growth Utilizes an internal pressure equalization system Internal brake system prevents unwanted tab movement when underway or backing down Quiet operation All actuators are fully load-tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or underwater Technical Specifications: Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 6' (1.8 M) Actuator Vertical Height - 11.875" (302 mm) Connectors - Deutsch style *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

AquaMax® Holding Tank Treatment - 32oz - Spring Shower ScentAquaMax® Holding Tank Treatment’s advanced enzyme-powered formulas neutralize odors and accelerate waste digestion to prevent clumping, clogging, and tank residue, all at the same time. Thetford’s beneficial probiotic treatments are Bronopol and Formaldehyde free.Features:  Enzyme-based holding tank treatment Breaks down waste and eliminates offensive odors Bottles with child-resistant caps Available in a one-gallon jug, 64-oz. bottle, 32-oz. bottle, and 6 pack of 8-oz. bottles Easy dosing system: 8-oz of AquaMAX® treats a 40-gallon holding tank Formaldehyde free Bronopol free Neutralizes odor Breaks down waste to prevent clumping, clogging, and tank residue Enzymes optimized for MAX performance Beneficial probiotics; good bacteria Septic system safe Campground and marina friendly Compliant with all current regulations Available as a liquid, dry granule or Toss-Ins® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

12 V Short Trim Tab Actuator - 23' Cable Ideal for limited vertical height applications such as swim platforms, Lectrotab short trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The short actuator incorporates either a standard or low profile transom mounting bracket. Features: Short actuator perfect for swim platform or limited vertical height applications Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation All actuators fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 10" (254 mm) Upper Mounting Bracket - Low Profile Lower Mounting Bracket - Standard *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

12 V Heavy Duty Tab Actuator - 6' Cable Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator.  The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket.  Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates a standard or low profile transom mounting bracket. Features: Stainless Steel upper mounting bracket Reinforced actuator upper mounting boss Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation All actuators fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 6' (1.8 M) Actuator Vertical Height - 11.875" (302 mm) Upper Mounting Bracket - Stainless Steel - 12 gauge Lower Mounting Bracket - Standard *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

53696 Rod Safety RingAttach the C.E. Smith Rod Safety Ring to the bottom of rod holders and stop worrying about dropping your equipment.  Made to secure into the 0.5" drain hole found at the bottom of the flush-mount cast-bottom rod holder from C.E. Smith, the rod safety ring gives you a convenient place for you to tether your rod and reel, boat fender, or any other valuable you don't want to fall overboard. Features: Provides a convenient place to secure rods 316L Marine-grade stainless steel Quick and easy installation *Sold as an Individual

Read more less

C.H. Cleans Hoses for Tanks & MSD - 1 GallonC.H. dissolves scale and calcium build-up and adds life to your boat's sanitation system while providing less maintenance and less cost over time. C.H. is specifically designed to remove uric scale and calcium carbonate from black water systems - from the toilet to the holding tank - without having to remove hoses.  Features:  Dissolves clogs which can cause odors and poor flushing performance Non-toxic, biodegradable, and safe to use with all materials commonly found in black water systems Safe and effective alternative to hazardous muriatic acid treatments Recommended for Lectra/San and Electroscan systems Best toilet cleaner WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - MahoganyA long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces.*Not compatible with all paints, Sikkens, Cetol, Deks, OljeWARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Read more less

Front Seal Kit for Up Series Helms UP, UP28, UP33, UP39Seal Kit 40875V Steering Helm Front Shaft. Specifically for UP Series Helms: UP25, UP28, UP33, UP39, and UP45.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

UP39 Rear Mount HelmSpecifications: Mounting: Rear Mount Displacement/Revolution: 39 cc - 2.4 cubic inches No. of Pistons: 7 Relief Valve Setting: 70 Bar - 1000 PSI Maximum Wheel Diameter: 710mm - 28" Weight: 5 kg - 11 lbs.

Read more less