Boat Outfitting

Actuator Assembly - 13.75" Closed LengthActuator assembly is complete hydraulic cylinder. Piston-like strong arm that pushes tab into position. Sophisticated plastic resin body. Nylon upper hinge. Bends 5° in actual use. Fluid flows through concealed hole in upper hinge thus eliminating external hoses subject to damage. Hearty and flexible enough to demands of offshore use. For use with Bennett standard trim tabs only.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

Motor Well Boot for 4 (inch) Diameter OpeningThe motor well boot provides an organized, covered pass-thru for control cables, wires, or fuel lines. The split side allows for installation without disconnecting controls.Features: Sold as a single pack that contains two Motor Well Boots Includes ties for a secure fit Black rubber, UV-resistant construction with polypropylene attachment gasket ring *Designed for a 4-inch diameter opening

Read more less

6" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates.  Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pro Rotary PolisherProfessional GradeThe Shurhold Pro Rotary Polisher is a tool built for the professional detailer, shops an dyards. This super powerful true Rotary Polisher cuts, Polishes and Buffs to bring out a mirror like finish in even the dullest surfaces.Features: 7" Quick Change Backing Plate 3 Different Ergonomic Gripping Styles EZ Clean Mesh Air Intake Vents EZ Change Carbon Brush Ports Thumb Controlled Variable Speed Dial Locking ON Button Detailed User Guide Canvas Storage Bag Specifications: Rated Voltage: 120V AC Frequency: 60Hz Thread Size: 5/8"-11 Rated Current: 12 Amps Quick Change Backing Plate Size: 7" (178mm) Rated Power: 1400W Polishing Pad Size: 7.5" (190mm) Variable Speed: 600-3200 RPM Net Weight: 9.7lb (3.95kg) Power Cord: 20' (6m) Specifications: Type: Buffers & pads Box Dimensions: 7"H x 8"W x 21"L WT: 11.85 lbs UPC: 703485120989 Quick Guide (pdf)

Read more less

Pro Polish Black Foam Pad - 7.5" for Pro Rotary PolisherPro Polish Pad is a black foam polishing and waxing pad, 7-1/2 inches in diameter. Unique dimpled pattern helps pad stay cool and work more efficiently. This pad was designed for Shurhold's Pro Rotary Polisher.Instructions:Attach the Pro Polish pad to the Polisher. Apply a 3-inch diameter circle of Pro Polish directly to the pad and place the machine against the surface before turning it on. This pad should be washed after each use with soap and lukewarm water.Features: Size: 7.5" Material: Foam Quantity: 1-Pack Color: Black Compatible Devices:Pro Rotary Polisher (Model #3400) Specifications: Type: Buffers & pads Box Dimensions: 2"H x 10"W x 10"L WT: 0.15 lbs UPC: 703485120385

Read more less

Mg Fiberglass Oxidation Removal KitA specialized three-step system that will effectively restore all fiberglass gelcoats. No. 49 Oxidation Remover will remove oxidation, stains, and scratches No. 45 Polish will restore brilliant gloss to the finishNo. 56 Pure Wax will provide long-lasting, durable protection to the restored surface. Specifications: Type: Fiberglass Box Dimensions: 4"H x 6"W x 9"L WT: 3.8 lbs UPC: 070382149659

Read more less

PVA TowelPVA towels absorb 50 percent more water than natural chamois, making for faster and more effective drying. The towels prevent water spots on all surfaces and come in an extra large size of 17" x 27" (43 cm x 69 cm).Features: Extra large size of 17" x 27" High-tech, synthetic material Lint free and resists mold and mildew Absorbs 50% more water than natural chamois Prevents water spots on all surfaces Instructions:After taking the towel out of the container, dampen it and wring out any excess water. Dry sections of the surface until the towel is saturated; wring it out and repeat. Wring it out before putting it back in the container. Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 10"L WT: 0.4 lbs UPC: 703485502204

Read more less

Shur-Lok AdaptersThreaded Adaptercompatible with most internally threaded products Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 7"L WT: 0.15 lbs UPC: 703485101018

Read more less

CAM-PT-300-03 Aluminum PowerTower® f/FLIR M300 Cameras - 12"Expertly designed to install your camera on the cabin roof, flybridge or radar arch of your powerboat.  Scanstrut thermal camera mounting solutions ensure you get the most from this ground-breaking new technology.Compatible with: FLIR M300 camerasFeatures: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 11.81" (300mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Powder Coated Aluminum Type: Aft Leaning Mount Height: 12 Box Dimensions: 11"H x 13"W x 16"L WT: 7.5 lbs UPC: 5060114797659 Quick Guide (pdf)

Read more less

C.H. Cleans Hoses for Tanks & MSD - 1 QuartC.H. dissolves scale and calcium build-up and adds life to your boat's sanitation system while providing less maintenance and less cost over time. C.H. is specifically designed to remove uric scale and calcium carbonate from black water systems - from the toilet to the holding tank - without having to remove hoses. Simply pour the recommended mixture in, allow to sit in hoses or tanks and let it go to work! By properly maintaining all connections and hoses it can save hours of messy work trying to unclog a system. A typical 1 ½” hose can be completely filled up within just a few years of use. Hoses can become so built up to the point where there is less than ¼” of space for anything to move through. Regular checking of build up and cleaning of hoses can prevent a situation where nothing leaves the toilet! Features:  Dissolves clogs which can cause odors and poor flushing performance Non toxic, biodegradable and safe to use with all materials commonly found in black water systems Safe and effective alternative to hazardous muriatic acid treatments Recommended for Lectra/San and Electroscan systems WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Bilge & Holding Tank Box Dimensions: 3"H x 3"W x 10"L WT: 3.5 lbs UPC: 085462040856 Brochure (pdf)

Read more less

APT-GPS-01 PowerTower® Center Mounted Bar f/GPS/VHF/Navtex AntennaMounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.  Works with standard 1” x 14 TPI thread.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 12.48" (404mm) Mount Position - Center In the Box: Antenna bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Mounting Brackets Height: 12.48 Box Dimensions: 4"H x 16"W x 19"L WT: 3.7 lbs UPC: 5060114795433 Quick Guide (pdf)

Read more less

12" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less