Boat Outfitting

Tilt Rotary Steering HelmSingle cable steering helm - not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat

Read more less

WD-OPNARY-01 Top Plate for PowerTower® Open Array Mounts - 4°Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.Mounts between PowerTower® mount and base of open array radar.Compatible with: Furuno - 1762, 1932, 1934, 1942, 1944, 1954, 851, DRS12A (6'), DRS12A (4'), DRS25A (4'), DRS25A (6'), DRS4A, DRS6A / DRS6A X CLASS, DRS6A-NXT radars Garmin - GMR Fantom 254, 256, 54, 4, 6, GMR™ 1224 xHD2, 1226 xHD2, 2524 xHD2, 2526 xHD2, GMR™ 404, 406, GMR™ 424 xHD2, GMR™ 624 xHDS2,  GMR™ 626 xHD2 radars Navman - 8000 Series (8084/8120) 4' radars Nobeltec - 4kW / 6kW radars Raymarine - 5S / 9S / RA1048HD / RA1048SHD, 7S / 11S / RA1072HD / RA1072SHD, Cyclone 3', 4', 6', Magnum 4ft 4kW/12kW, Magnum 6ft 4kW/12kW radars Features: Enhance the performance of your open array with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A tough, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine Grade Polymer Dimensions (L x W ) - 9.69" x 9.69" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual Specifications: Construction: Polymer Type: Wedges Height: N/A Box Dimensions: 2"H x 10"W x 10"L WT: 2 lbs UPC: 5060114795952 Quick Guide (pdf)

Read more less

BOLT 1212ED Electric - Edge Mount Limited Space Trim Tab Kit - 12V - 12" x 12" Designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates.Kits Include: (2) 12-volt adjustable upper hinge actuators with 6' wire harnesses and waterproof connectors (BEA3000) (2) Stainless steel trim planes (tabs) and mounting plates (2) 20' wire harnesses with waterproof connectors (BAW2020) Features: Requires less than 6.5" of vertical transom space to install Superior seal design inspired by over 50 years of Bennett’s proven success in actuator manufacturing excellence Controls sold separately  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 7"H x 14"W x 15"L WT: 22.6 lbs UPC: 666285600283

Read more less

Express® Mach3™ - Right Hand - Stainless Steel Propeller - E1-1012 - 3-Blade - 10.75" x 12 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing stainless steel propellers in the World. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.The Three Blade Express is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rotation: Right Diameter (Inches): 10-3/4" Material: Stainless Steel Pitch: 12 Box Dimensions: 7"H x 11"W x 12"L WT: 8.1 lbs UPC: 652480200915 Quick Guide (pdf)Brochure (pdf)

Read more less

Bug & Tar Remover SpongeSponge covered with a non-abrasive mesh cover for easier and faster cleaning.The Bug and Tar Remover sponge is a non-abrasive, mesh-covered sponge that is perfect for removing tar, grit, bugs, stains, and grime. Perfect for removing stubborn contaminants from any surface without worrying about ruining the finish. Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 8"L WT: 0.1 lbs UPC: 703485002827

Read more less

Instant Calcium, Rust & Lime Remover - Gallon RefillC.R.L means clean, reveal, and luster! Do it the right way with this deposit killing organic formula. One spray then polish away with Calcium, Rust & Lime Remover!Quickly and easily removes even the crustiest of stains, deposits and build-up. Made of organic salt, it is safer and easier to use than traditional cleaners. Recommended for removal of hard water spots and rust stains.Use On: Glass Plastic & Acrylics Aluminum Fiberglass Tile Stainless Steel Brass Copper Painted Surfaces Enamel finishes Instantly Removes: Hardwater Spots Encrusted Calcium/Lime Deposits Heavy Green Tarnish Heavy Oxidation Rust Corrosion Grease Oil Water Stains Soap Scum Build-up Not for: Chrome, Marble, some Granite, Jura, Travertine & TerrazzoWARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause reproductive harm, and 1, 4-Dioxane which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Hard Water Box Dimensions: 4"H x 7"W x 13"L WT: 9 lbs UPC: 065925016109

Read more less

Dual Action Polisher ProProfessional GradeSimilar to the original Shurhold Dual Action Polisher, the Dual Action Polisher Pro features an XL, 21 mm Orbit. The increased Orbit and pad size make this a more powerful Polisher. The unique Dual Action motion will still protect your finish and give you the professional results you desire.Features: 6" Quick Change Backing Plate 2 Different Ergonomic Gripping Styles EZ Change Carbon Brush Ports Thumb Controlled Variable Speed Dial Locking ON Button Detailed User Guide Canvas Storage Bag Specifications: Rated Voltage: 120V AC Frequency: 60Hz Thread Size: 5/8"-11 Rated Current: 4.2 Amps Quick Change Backing Plate Size: 6" (152mm) Rated Power: 900W Polishing Pad Size: 5.5"-6.5" (140-165mm) Variable Speed: 1800-4800 RPM Net Weight: 6.0lb (2.73kg) Power Cord: 20' (6M) Heavy-Duty Cable Specifications: Type: Buffers & pads Box Dimensions: 6"H x 8"W x 17"L WT: 9 lbs UPC: 703485120996 Quick Guide (pdf)

Read more less

Serious Pad Cleaner - 12ozSerious Pad Cleaner is scientifically formulated powdered cleaner for rejuvenating buffing pads. Mixed with water this cleaner dissolves compounds and waxes from wool, foam and blended buffing pads cleaning them to be used over and over. For most pad cleaning applications Mix 2 scoops (scoop included) with 2 gallons of water. This will allow for 10-12 batches. Mixed solution can be used for upto a one week or until product nolonger breaks down and cleans pads, which ever occurs first.Also great for cleaning dock lines along with microfiber and cotton bonnets.MADE IN USAInstructions:In a plastic container, mix 1 scoop (included) or1 tbsp. of powder per 1 gallon (3.78 Litters) of warm water. Stir thoroughly. Mix only what is needed for application and use within 7 days of mixing or more often with heavy use. Soak items to be cleaned for up to 15 minutes. Agitate and Brush lightly. Thoroughly rinse area with clean water. For extremely soiled area, let solution soak in longer. Buffing PadsWash your pads immediately for easiest cleaning. Serious Pad Cleaner & Rope Wash will remove caked on and saturated compounds ands waxes from your buffing pads. Let pads thoroughly air dry prior to using again.Ropes & Dock LineWash annually or as needed. Serious Pad Cleaner & Rope Wash will remove stains from mold, mildew, algae, and dirt in ropes and dock lines. Agitate with Shurhold's Rope Brush for best results.Safety & HandlingWhile this product is environmentally friendly and bio-degradable, please follow these warnings. This is a concentrated citrus cleaner and may irritate your skin with prolonged exposure. Due to its powerful cleaning properties, wear old clothes while using. Always wear protective gloves and safety glasses. Do not mix with bleach or any other concentrated chemical cleaners. Keep unused powder in a cool, dry place, out of reach of children and pets.Caution:Do not get in eyes, on skin, or clothing. Wash hands thoroughly after handling. Specifications: Type: Buffers & pads Box Dimensions: 4"H x 4"W x 5"L WT: 0.9 lbs UPC: 703485120903

Read more less

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Type: Aft Leaning Mount Construction: Aluminum Height: 5.91 Box Dimensions: 7"H x 13"W x 13"L WT: 6 lbs UPC: 5060114795402 Quick Guide (pdf)Brochure (pdf)

Read more less

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX-1421-4L - 4-Blade - 14" x 21 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2)two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift.These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: 21 Material: Stainless Steel Diameter (Inches): 14" Rotation: Left Box Dimensions: 8"H x 16"W x 16"L WT: 16.6 lbs UPC: 652480200908 Quick Guide (pdf)Brochure (pdf)

Read more less

Quik Dry MopDesigned to quickly remove water from decks, fiberglass and painted finishes leaving them dry and streak-free. Material is not affected by mold, mildew, soaps or chemicals and is more durable than PVA. Protective end cap prevents damage to decks, paint and fiberglass.  Stores in a reusable pouch so your mop is ready to use when you need it. Mops are recommended for drying, not cleaning or scrubbing.Features: Made from super absorbent reinforced, proprietary material  Die cut 1" wide strips. 67% more absorbent than felt or latex coated mops  Absorbs over 5 times its weight in liquids *Sold as an Individual  Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 7"W x 20"L WT: 0.7 lbs UPC: 633590312156 Brochure (pdf)

Read more less

BOLT 18x9 Electric Trim Tab System - Control Switch Required Electric Trim Tab Systems For Trailered BoatsBoaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for: Trailered boats from 17-28 feet Single actuator use, due to the inability to synchronize two electric actuators on the same tab Features: Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment Robust, water-tight black nylon actuator provides trouble-free operation Main seal located high to protect against marine growth and water intrusion failures Quieter than any other system on the market - No more scaring the fish away! Installation is fast - no need to disassemble parts of the actuator Controls sold separately  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Actuator Type: Electro-Mechanical Box Dimensions: 5"H x 15"W x 25"L WT: 23.4 lbs UPC: 666285600023 Owner's Manual (pdf)

Read more less