Boat Outfitting

11lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC ApprovedThis composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder.Features: Non-corrosive 3-layer fiberglass composite cylindrical Ergonomic collar for a nice look The handle makes it easier to carry Type 1 valve Frequent Questions:Where can they be refilled?These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station.How safe are these cylinders?These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.”When do they need to be recertified?Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here.How long is the useful life of the cylinder?Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC.Will cylinders work in cold climates?The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix.Will the cylinders work in warm climates?The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Washdown Valve with Chrome BaseA bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: A barbed hose fitting connects 3/4 in. inside-diameter tubing Standard hose threads with a protective cap that has a retaining strap are standard Chrome-plated ABS flange Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4 in. marine hose Protective cap with retainer The flange dimension is 2-1/4 in. OD Installation in a 1-1/4" hole Straight fitting with shutoff valve

Read more less

Two Socket Mounting Plate Only This dual power socket/meter panel accommodates USB and standard power sockets and meters that are 1-1/8 inches in diameter. Constructed of injection-molded nylon. Specifications: Distance Between Holes (Length): 3-1/2 in. Distance Between Holes (Width): 1 in. Diameter: 1-1/8 in. Weight: 0.05 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Terrova® QUEST™ 90/115 Trolling Motor with Wireless Remote - Dual Spectrum CHIRP - 24/36V - 90/115LBS - 45"For years, Terrova has made its name as a work horse for anglers all over the country. It gets up earlier and stays out later so that you can put more fish in the boat. And now, it’s been completely reimagined. The new QUEST series of dual 24/36 volt brushless trolling motors was designed for anglers who demand the best from their equipment, even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever, and even an eco mode to extend battery life, the next generation of Terrova is designed to have your back out on the water for years to come.Stow/Deploy LeverPress this lever on the mount and fall-away ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Auto Park helps the motor stow effortlessly by orienting the lower unit to the perfect stow position automatically.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Terrova's wireless remote.Part of the One-Boat NetworkOut of the box, Minn Kota motors come standard with everything you need to connect to select Humminbird fish finders, unlocking more advanced navigation features without needing to remember additional adapters or complicated set-up procedures.Spot-Lock with JogSpot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.Drift Mode Automatically engages speed and course control simultaneously, meaning anglers no longer need to depend on drift socks, kicker motors, or manual operation to control speed over water – even in the heaviest wind and current.Real-time Battery MonitoringCheck battery power levels while the motor is in use, real-time “time until empty” display monitor, with a notification when battery power is reduced to 20% to prompt users to enter “Eco-mode” which can reduce current draw to extend battery life.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Heel-Toe Programmable Electric Foot PedalLow profile design offers two steering options: Heel/toe pedal and left/right steering buttons, plus a user-programable button to keep the most used features a tap away, including: mark a waypoint, engage AutoPilot, or deploy or retract Minn Kota shallow water anchors. Includes 18' cord.Built-In Dual Spectrum Chirp SonarKeeps your transducer and wiring completely concealed and protected running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate, more detailed returns of fish, structure and the bottom than traditional sonar.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Mobile App CompatibilityControl your motor directly from your Apple® or Android™ device with the One-Boat Network app. You get quick command of speed, steering, Spot-Lock and AutoPilot — plus the ability to update software.Specifications: For Use In: Freshwater Shaft Length: 45" Voltage: 24/36 One-Boat Network Compatible: Yes QUEST Series: Yes Spot-Lock: Yes Built-In Sonar: Dual Spectrum CHIRP Foot Pedal Style: Heel-toe / electric Control: Foot Pedal, Wireless Remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 58 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Power Prop (MKP-40) Warranty: Two-year warranty Specifications: Built-In Transducer: Yes Control Type: Wireless Remote Included Propeller: MKP-40 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: Terrova Shaft Length (Inches): 45" Thrust (Pounds): 90/115 lbs Voltage - Input Range (Volts): 24v or 36v Box Dimensions: 15"H x 18"W x 64"L WT: 96 lbs UPC: 029402050840 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

16oz Boat Cleaner - Removes Waterline & Rust StainsThis is an ethanedioic acid-based cleaner.Features: This cleaner removes yellow/brown waterline stains/scum and rust stains Shelf Life at 23 degrees Celsius is 24 months Specifications: pH Value: 1.0 Size: 16oz bottle The Product Can Be Applied By: A brush is recommended, but cotton, a rag, or a sponge may be used Product Mixing Ratio (By Volume): Single pack Recommended UseTo be used for cleaning the waterline staining and rust staining on GRP and painted surfaces.Surface PreparationApply the product to the area to be treated. Allow it to work for up to 10 minutes. Rinse well with fresh water and a sponge.Pre-treatmentClean with detergent.StorageThis product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Quick Guide (pdf)

Read more less

32oz Stainless Steel CleanerThis is a phosphoric acid-based stainless steel cleaner. Features: It removes rust staining and surface corrosion from polished marine-grade stainless steel  Shelf Life at 23 degrees Celsius is 24 months  Specifications: pH Value: 1.0 Size: 32oz bottle Contents: Contains non-ionic surfactants < 5%  Recommended Applications: A brush is recommended, but cotton, a rag, or a sponge may be used Recommended UseUsed for cleaning rust staining and surface corrosion from polished marine-grade stainless steel.Surface PreparationApply the product to the area to be treated. Allow it to work for up to 30 minutes. Rinse well with fresh water and a sponge.Pre-treatmentClean with detergent.StorageThis product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Quick Guide (pdf)

Read more less

32oz Boat Cleaner - Removes Waterline & Rust StainsThis is an ethanedioic acid-based cleaner.Features: This cleaner removes yellow/brown waterline stains/scum and rust stains Shelf Life at 23 degrees Celsius is 24 months Specifications: pH Value: 1.0 Size: 32oz bottle The Product Can Be Applied By: A brush is recommended, but cotton, a rag, or a sponge may be used Product Mixing Ratio (By Volume): Single pack Recommended UseTo be used for cleaning the waterline staining and rust staining on GRP and painted surfaces.Surface PreparationApply the product to the area to be treated. Allow it to work for up to 10 minutes. Rinse well with fresh water and a sponge.Pre-treatmentClean with detergent.StorageThis product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Quick Guide (pdf)

Read more less

MKA-56 Quick Release BracketEasily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking handle with stainless steel pins can be secured with a padlock (padlock not included, sold separately).Features: Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

Read more less

Marine Touchless Sealant - 128ozHave you had trouble finding time to fully wax your car?  303® Touchless Sealant will save you hours! This Si02 formula is a completely TOUCHLESS quicker alternative to waxing your vehicle. Simply spray on, and rinse off – it’s that easy!  It only takes minutes to get that same water beading protection you get from a full wax, saving you hours spent in the garage.   It’s also great for those looking to prolong the time in between waxes, or ceramic coatings. Safe for clear coat, gel coat, fiberglass, plastics, windshields, and wheels too!Usage Directions:Wash your car out of direct sunlight while the surface is cool. While the surface is still wet and out of direct sunlight, spray a small amount of product evenly across the surface, treating one section of the vehicle at a time. Only a light mist of the product is needed. Immediately rinse the section off. You will see water beading on the surface, meaning it is now protected. Repeat the steps on all sections of the vehicle, and then dry thoroughly with a waffle weave drying towel or microfiber towel.Features: Provides superior water beading Protects against paint fading Lasts up to 2x longer than traditional wax! Simply spray on, and rinse! Also great for use on windshields and wheels! 128 fluid oz. 303 Touchless Sealant is safe to use on a variety of surfaces, such as:Paint Clear coat Wheels Glass Plastics Fiberglass Gel-coat Aluminium Hard plexiglass And more! Specifications: Type: Waxes & Polishes Box Dimensions: 5"H x 7"W x 10"L WT: 8.7 lbs UPC: 082043303997 Quick Guide (pdf)

Read more less

10' White Stern Flex Hose with Transom FlangeThis Trident Stern Flex Hose is white (Trident Marine 129W series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142W-2000.Features: Highly resistant to crushing, abrasion, and UV and has good resistance to chemicals  Extraordinary flexibility Construction: Hose: Lightweight polyethylene copolymer Reinforcement: Integral Polyethylene Helix Temperature Range: -40°F to 140°F (-40ºC to 60ºC) Specifications: Color: White Inner Diameter: (inch) 2” / (mm) 50.8 Outer Diameter: (inch) 2.35” / (mm) 60 Bend Radius: (inch) 3.5” / (mm) 88.9 Weight: (lb/100 ft.) 26 / (kg/m) 11.8 Quick Guide (pdf)

Read more less

4" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover. Features: Four stainless steel t-bolt clamps Very high temp silicone/EDPM blend rubber - molded This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards  Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous Construction: Color: Blue Temperature Range: up to 350°F (177°C) Specifications: Inner Diameter: (inch) 4” / (mm) 101.6 A: (inch) 5.75” / (mm) 146 B: (inch) 5.75” / (mm) 146 C: (inch) 1.75” / (mm) 44.4 D: (inch) 1.50" / (mm) 38.1 R: (inch) 2” / (mm) 50.8 W: (inch) 0.25" / (mm) 6.4 Elbow Degree: 90 degrees Quick Guide (pdf)

Read more less

5/16" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the FootTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:  Sold by the foot Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Applications: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Specifications: Inner Diameter: (inch) 5/16" / (mm) 7.92 Outer Diameter: (inch) 0.611 / (mm) 15.5 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 1.75" / (mm) 44.5 Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 5/16" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.16 lbs Quick Guide (pdf)

Read more less