Boat Outfitting

3676 products


  • Sale -27%Last stock! Springfield Pedestal - 3-Stage Table - 16"-30" - Brite Dip [1660236]

    Springfield Pedestal - 3-Stage Table - 16"-30" - Brite Dip [1660236]

    4 in stock

    Pedestal - 3-Stage Table - 16"-30" - Brite DipGas Powered Pedestals with 12-1/2″ table mount and 12″ diameter floor base with 11″ hole pattern for added stability.Features: Made from high-strength aluminum, available in a variety of heights and finishes. 3-stage table pedestals are designed to bring maximum strength and support to your dining experience. Warranty: 5 Years

    4 in stock

    $1,319.99$965.50

  • Sale -11%Last stock! TOON KICKER Pontoon Outboard Bracket [9100]

    TOON KICKER Pontoon Outboard Bracket [9100]

    2 in stock

    Pontoon Outboard BracketThe Toon Kicker outboard motor bracket is designed for mounting a kicker motor to a pontoon.Features & Benefits: Made in the USA Consume less fuel while cruising around the lake Saves hours of wear on a big motor Operating restrictions on certain waters Back-up motor in the event of an emergency

    2 in stock

    $782.99$700.50

  • Davis Quick Reference International Navigation Rules Card [127]

    Davis Quick Reference International Navigation Rules Card [127]

    8 in stock

    Quick Reference International Navigation Rules CardA comprehensive guide incorporating the International Maritime Buoyage System and COLREGS. Clarifies differences between Cardinal and Lateral buoyage systems and buoyage regions, the key to reducing confusion and danger when entering unfamiliar waters or busy harbors. Complete details on the right-of-way, sound signals, entering and clearing a foreign port, lights and day shapes, collision prevention procedures, and signal flags.

    8 in stock

    $18.50

  • Sale -12%Last stock! Springfield Taper-Lock 9" - Flat Side Base [1600005] Springfield Taper-Lock 9" - Flat Side Base [1600005]

    Springfield Taper-Lock 9" - Flat Side Base [1600005]

    3 in stock

    Taper-Lock 9" - Flat Side BaseFeatures: 9″ Flat Side Base With 8″ Hole Pattern High-Strength Aluminum To Withstand All Conditions Below The Deck Mount Requires A 3-1/2″ Hole In Deck Use With Any Taper-Lock™ Post (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    3 in stock

    $63.99$56.50

  • Sale -41% Lenco Standard Integrated Tactile Switch Kit w/Pigtail f/Single Actuator Systems [15169-001]

    Lenco Standard Integrated Tactile Switch Kit w/Pigtail f/Single Actuator Systems [15169-001]

    17 in stock

    Standard Integrated Tactile Switch Kit with Pigtail for Single Actuator SystemsComplete your Lenco single actuator trim tab system with the latest, maintenance-free (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel. Features Include Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad with waterproof Plug & Play Deutsch connectors Wiring harness length 30" (76.2 cm) from the back of the switch bezel 36" power pigtail 2 1/16" hole cut-out size, overall key pad size of 2.75" x 2.75" 4.08" clearance required from the back of the key pad's mounting location ATTENTION: REPLACEMENT KEY PADS & CONTROL BOXES FOR 2016 & PRIOR SWITCHES ARE NOT COMPATIBLE WITH THIS SWITCH KIT.Replacement parts are available and are sold separately. Specifications 3 Year Warranty System Type: Single Actuator Compliance: CE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

    17 in stock

    $326.20$193.50

  • Sale -41% Lenco LED Indicator Integrated Tactile Switch Kit w/Pigtail f/Single Actuator Systems [15170-001]

    Lenco LED Indicator Integrated Tactile Switch Kit w/Pigtail f/Single Actuator Systems [15170-001]

    27 in stock

    LED Indicator Integrated Tactile Switch Kit with Pigtail for Single Actuator SystemsComplete your Lenco trim tab system with the latest, maintenance-free (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel.LED indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions.Features Include Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad with waterproof Plug & Play Deutsch connectors Wiring harness length 30" (76.2 cm) from the back of the switch bezel 36" power pigtail 2 1/16" hole cut-out size, overall key pad size of 2.75" x 2.75" 4.08" clearance required from the back of the key pad's mounting location 2 high-intensity LED Indicator displays show the exact position of your trim tabs at all times Photo Eye for optimum viewing in all light conditions Backlit key pad for optimum viewing at night Self-Check feature Replacement parts are available and are sold separately. Specifications 3 Year Warranty System Type: Single Actuator Compliance: CE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

    27 in stock

    $554.01$328.50

  • Davis FSR Fiberglass Stain Remover - 16oz [790]

    Davis FSR Fiberglass Stain Remover - 16oz [790]

    21 in stock

    FSR Fiberglass Stain Remover - 16ozFSR (Fiberglass Stain Remover) is a unique stain absorbing gel that is ideal for removing oil, rust, exhaust, waterline and transom stains. It can also be used anywhere else fiberglass stains may crop up-shower stalls, furniture, etc. Use for removing road soil from trailered boats and recreational vehicles. Its non-abrasive quality means that it's safe to use on white painted surfaces as well as on gel-coat. Just be sure to test a small area first to be sure FSR will not damage finish. Requires no sanding or compounding. Simply apply with a brush, sponge or cloth. Wait a few minutes and then wipe off or rinse. Specifications: Type: Fiberglass Box Dimensions: 4"H x 4"W x 4"L WT: 1.25 lbs UPC: 011698079001 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

    21 in stock

    $23.50

  • Sale -1% Davis Rudder Position Indicator [385]

    Davis Rudder Position Indicator [385]

    31 in stock

    Rudder Position IndicatorAwareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside another boat, picking up a skier, mooring, or any other "close call" situation. Davis' Rudder Position Indicator gives instant visual reference of rudder angle.The pointer swings a full thirty degrees with each revolution of the wheel. Mounts directly to your hub (approximately 2" (5 cm) in diameter) with a self-adhesive pad . Rugged, hermetically sealed, weatherproof, and sunproof housing ensures long life. No cables, adjustments, or electricity required; gravity power makes it simple and service-free. Suitable for boats with mechanical and single station hydraulic steering systems. Specifications: Instrument Function: Wind Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs UPC: 011698038503 Owner's Manual (pdf)

    31 in stock

    $34.99$34.50

  • Sale -41%Last stock! Lenco 12" x 12" Standard Performance Trim Tab Kit w/LED Indicator Switch Kit 12V [RT12X12I]

    Lenco 12" x 12" Standard Performance Trim Tab Kit w/LED Indicator Switch Kit 12V [RT12X12I]

    4 in stock

    Standard Performance Series TabsStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with Electro-Polished BladesWe make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's Standard Performance series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different? All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab SystemsFeatures: Self-contained, sealed keypad Self-contained, sealed control box module Fade/smudge-proof, laser engraved graphics Plug & play switch wiring harness connector Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75" Built-in retract feature returns tabs to a fully retracted position when power is removed 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight 12 & 24-volt compatibility Includes Self-Check Feature Each kit contains: Tactile LED Indicator Switch 2 actuators with 6' Lead & Deutsch Plugs 2 12 Gauge SS Electro Polished trim tab planes 2 20' Actuator Extension Wiring Harness 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All Necessary stainless steel mounting Hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

    4 in stock

    $1,639.16$972.50

  • Sale -41%Last stock! Lenco 9" x 9" Edgemount Trim Tab Kit w/LED Indicator Switch Kit 12V [TT9X9EI]

    Lenco 9" x 9" Edgemount Trim Tab Kit w/LED Indicator Switch Kit 12V [TT9X9EI]

    5 in stock

    Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Instant response electric actuators for precise control Everything is fully submersible, maintenance-free and sealed for life Self-locking ballscrew will not drift, even while backing down 12-gauge laser cut stainless steel trim tab planes High-impact corrosion-proof mounts look great through years of abuse Clean, time and space-saving installation Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case 316 super buff stainless steel rams Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab SystemsFeatures: Self-contained, sealed keypad Self-contained, sealed control box module Fade/smudge-proof, laser engraved graphics Plug & play switch wiring harness connector Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75" Built-in retract feature returns tabs to a fully retracted position when power is removed 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight 12 & 24-volt compatibility Includes Self-Check Feature Each Kit Includes:Tactile LED Indicator Switch Kit 2 Actuators with 6' lead & Deutsch Plugs 2 20' Actuator Extension Wiring Harness 2 12 gauge Stainless steel trim tab planes 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All stainless steel mounting hardwareWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

    5 in stock

    $1,450.33$860.50

  • Sale -41%Last stock! Lenco 12" x 12" Standard Performance Trim Tab Kit w/Standard Tactile Switch Kit 12V [RT12X12]

    Lenco 12" x 12" Standard Performance Trim Tab Kit w/Standard Tactile Switch Kit 12V [RT12X12]

    4 in stock

    Standard Performance Series TabsStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with Electro-Polished BladesWe make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's Standard Performance series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different? All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case Standard Solid State Tactile Switch Kits with Retractor Feature#15069-001 (124SSR)For 12-volt single actuator systems. Control box is waterproof, self-contained, sealed, solid state, Deutsch connected for easy Plug & Play installation, and features built-in retractor. Kit includes 36" power pigtail and nylon nuts for mounting keypad. Colorful display box.Features Built-In Retractor Feature Solid State Electronics Plug & Play Low Profile Design Self-Contained, sealed keypad & solid state control box with waterproof connectors Simple, Quick Installation Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75' Each kit contains:Standard Tactile Switch Kit2 actuators with 6' Lead & Deutsch Plugs2 12 Gauge SS Electro Polished trim tab planes 2 20' Actuator Extension Wiring Harness 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All Necessary stainless steel mounting Hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

    4 in stock

    $1,420.11$842.50

  • Sale -41% Lenco 9" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit 12V [15104-102]

    Lenco 9" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit 12V [15104-102]

    6 in stock

    9" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit- 12V Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.Kit includes:  Self-contained sealed keypad Control box 36" Pigtail Specifications: Suggested Boat Length: 16' to 25' Length of Tab: 9" Width of Tab: 12" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Standard Tactile Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

    6 in stock

    $1,253.26$743.50

Boat Outfitting

© 2026 Safe Water, Powered by Safe Water

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account