8" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates. Features:
Provides Improved Hole Shot
Reduces Water Drag at Take Off
Reduces Porpoising
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Transom Support Plate Upper MountTransom Support Plate distributes stress of engine bolts. Cast in high quality aluminum. All plates are 3/8" thick. Fit top bolt pattern of outboard. Generic plate with no lettering is standard, but custom logos and black painting can be produced with minimum quantities. Features:
Distributes stress of engine bolts
High quality cast aluminum
All plates - 3/8" thick
Simple to install
EEL "Y" AdaptersThese adapters are equipped with sealing collars and are for use in wet locations.Boat SideFemale Connector: Attaches to boat inlet or cordset(2)30A-125V Locking w/ Sealing Collar SystemDock SideMale Plug: Attaches to dockside receptacle or cordset(1)30A-125V LockingWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Y-Adapter
Box Dimensions: 5"H x 12"W x 13"L WT: 6.2 lbs
UPC: 093344051869
Owner's Manual (pdf)
Actuator Lower Hinge w/PinWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.
MOB Tag with Black Quick Release BandProtect yourself with this wireless, wearable MOB tag. The tag can be worn on a wristband, carabiner, or key ring float.Specifications:
Dimensions (HxWxD): 43.94 mm x 37.26 mm x 11.96 mm
Wireless range: Up to 66 ft (20 m)
Battery type: CR 2032 coin cell
Battery life: >1,200 hours of connected time
What's In The Box?
Wireless MOB Tag
CR2032 coin cell battery
20 mm Quick Release Band
Carabiner with 20 mm Quick Release attachment
Floating foam keychain
Documentation
MOB Tag with White Quick Release BandProtect yourself with this wireless, wearable MOB tag. The tag can be worn on a wristband, carabiner, or key ring float.Specifications:
Dimensions (HxWxD): 43.94 mm x 37.26 mm x 11.96 mm
Wireless range: Up to 66 ft (20 m)
Battery type: CR 2032 coin cell
Battery life: >1,200 hours of connected time
What's In The Box?
Wireless MOB Tag
CR2032 coin cell battery
20 mm Quick Release Band
Carabiner with 20 mm Quick Release attachment
Floating foam keychain
Documentation
Electronic Indication Control DisplayThis Bennett control display is a display only and has three features combined into one sophisticated control: soft-touch helm control, trim tab indicator, and the auto tab retractor feature.Additional Features:
Water-resistant
Highly accurate
Variable intensity LEDs for night or day
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
M40 Mirror Glaze Vinyl and Rubber Cleaner and Conditioner - 16ozA complex formula that cleans, penetrates and rejuvenates vinyl and rubber surfaces.Features:
Durable protection that screens out damaging ultraviolet rays
Leaves a rich, natural sheen, unlike the shiny synthetic coating of simple protectants
Restores life and color
Hybrid Ceramic Detailer - 26ozMeguiar’s Hybrid Ceramic Detailer – Remove Contaminants, Boost Gloss & Enhance Protection. Meguiar’s Hybrid Ceramic Detailer provides the missing link between washing and waxing with Hybrid Ceramic protection. This is the perfect product to use in between applications of Meguiar’s Hybrid Ceramic Wax or Meguiar’s Hybrid Ceramic Liquid Wax to quickly enhance the existing hydrophobic water beading protection. You can also use this advanced formula to remove light contaminants and dust to maintain that “just washed” appearance while adding a layer of hybrid, SiO2 ceramic protection that beads water like crazy! Features:
CLEANS & PROTECTS: Spray detailer gently removes contaminants like dust, finger prints & bird droppings, while adding water beading protection
CUTTING-EDGE TECHNOLOGY: Contains sophisticated SiO2 Hybrid Ceramic protection
EASY TO USE: Removes light & fresh contaminants by easily spraying on, wiping off
ENHANCES PROTECTION: Enhances waxes, coatings & sealants
ACHIEVE A JUST-WASHED LOOK: Gently remove fresh contaminants between regular washes before they have the chance to bond
Specifications:
Type: Ceramic Coating
Box Dimensions: 2"H x 4"W x 11"L WT: 1.9 lbs
UPC: 070382014872
Temperature Sender 1/8" NPTF Cylinder Head TempFeatures:
Temperature Sender
1/8" NPTF
NPTF Cylinder Head
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Oil Pressure Sender - Single StationSpecifications:
1/8" NPTF
0-80 PSI
Single Station
Standard Ground
Factory P/N SD0003This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.