Boat Outfitting

ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 OhmVDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh. These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low. Features: Connection - M4 Stud Voltage: 6-24V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Gold Box Dimensions: 4"H x 4"W x 19"L WT: 1.3 lbs UPC: 754059001036

Read more less

Temperature Sender 250°F/120°C Floating Ground - 1/2-14 NPTFFeatures: Ground - Floating Connection - .25" Spade Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 805/1/4 Max. Temperature Scale - 250°F/120°C  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Gold Box Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbs UPC: 754059002972

Read more less

Pinpoint GPSMotorGuide's proprietary Pinpoint GPS technology - available either integrated with select models or as an easy upgrade. Pinpoint uses an ultra-precise GPS receiver and precision control algorithms for incredibly accurate performance.A compact, easy-to-use remote controls these Pinpoint features:Anchor Holds boat position on a fixed GPS coordinate Stores and recalls up to eight positions While in Anchor mode, the directional controls can be used to move the boat in 5-foot increments in any direction Heading LockNavigates the boat to a specific compass headingRouteRecord and playback up to eight routes of up to four miles eachCruise ControlHold a GPS speed while navigating a heading or routeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs.

Read more less

Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for composite and plastic bonding applications and not for bonding to metal substrates. Unlike other 2 part acrylic adhesives AT-4020 has a one year shelf life when stored at 72 degrees but is best refrigerated when ever possible. It is packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

Read more less

Commercial Pilot PRO 25' Hose Kit with Boat Bumper Metal Body NozzleThis kit includes a 25' black PRO Series Coiled hose, Boat Bumper Metal Body Nozzle, and a brass swivel with quick release.20' PRO Series Coiled Hose:This PRO Series hose is tough and rugged, made from top-of-the-line High Performance Polyether material for optimal durability and UV stability in a marine environment. It features a 4.75" coil and dual strain reliefs to reduce kinking, and the 1/2" ID (inner diameter) of the hose provides a 30% increase in flow rate over 3/8" ID hoses. The PRO Series is not only larger in diameter, but also features a thicker hose wall for added strength and durability. Built with 3/4" garden style brass fittings, it fits all standard US hose connections, with a field-serviceable design for easy hose repairs using common hand tools.Boat Bumper Metal Body Nozzle:The Boat Bumper Metal Body Nozzle is designed with a big rubber tip that protects gelcoat and other boat surfaces from drop damage. Its adjustable spray pattern ranges from a wide-angle rinse to a focused stream for tackling stubborn debris. The strong metal body construction, solid brass spray mechanism, and stainless steel components combine to ensure long-lasting performance and precise flow control.Quick Release & Swivel Fitting:The brass swivel keeps the spray nozzle properly aligned when attached to the rigid coiled hose and features a quick release for easy removal. Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 7"W x 16"L WT: 3.6 lbs UPC: 659988124729

Read more less

Cockpit Marine 52mm (2-1/16") LCD Hourmeter - Black Dial/Chrome Bezel VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio.Features: Digital LCD Hourmeter Voltage - 12-32V Input Type - Analog Mounting Hardware Included Records up to 100,000 operating hours Standard .250” (6.3mm) spade connectors *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Box Set: No Gauge Size: 2-1/16" Series: Cockpit Marine Gauge Type: Hourmeter Voltage - Input Range (Volts): 8 to 16 VDC Box Dimensions: 4"H x 4"W x 5"L WT: 0.15 lbs UPC: 754059082455 Owner's Manual (pdf)

Read more less

VDO SingleViu 52mm (2-1/16") Oil Pressure Gauge - 80 PSI - 0-180 OhmSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*0-180 Ohm sender required.Features: 10-1804 Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Molex MX 150 8 Pin Connector Voltage 12-24V Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Oil Pressure Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 6"W x 6"L WT: 0.4 lbs UPC: 4103590683199 Owner's Manual (pdf)

Read more less

Cockpit Marine 52mm (2-1/16") Fuel Level Gauge - Black Dial/BezelVDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform.  VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio. Features: E - 1/2 - F range Works with all 240-33Ohm marine fuel senders For 12V electrical systems Connection: M4 Stud Dial Scale: Single Input Type: Analog Mounting Hardware: Included *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge Type: Fuel Level Series: Cockpit Marine Voltage - Input Range (Volts): 8 to 16 VDC Gauge Size: 2-1/16" Box Set: No Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs UPC: 754059079479 Owner's Manual (pdf)

Read more less

Talon 6" Setback Bracket Riser Just like Talon locks you to your spot in the water, Minn Kota's mounting and adapter brackets keep Talon locked on your boat in any condition. Unparalleled strength combined with an innovative modular design, so it's easy to select the right mount and get Talon rigged up on any boat. Features: Provides 6" of additional setback For direct transom mount application only Provides precise boat positioning Quickly and quietly stops boat Easy to install

Read more less

Fuel Stabilizer - 32oz *Case of 12*STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick and easy starts after storage. Alternatively, the additive works wonders to keep the gasoline in the car fresh if users aren’t visiting the pump as often. STA-BIL Storage Fuel Stabilizer removes water to prevent corrosion and cleanses carburetors and fuel injectors. The product also protects the engine from gum, varnish, rust, and corrosion to prolong the life of any engine. One treatment eliminates the need to drain the gasoline of any two- or four-cycle engine before storing. Additionally, the product works well to keep fuel fresh in the everyday vehicle if it has been sitting idle for longer than usual.*This case contains TWELVE 32 fluid-ounce bottles of STA-BIL Fuel Stabilizer. Features: America’s #1 fuel stabilizer treatment Keeps fuel fresh for long-term storage – up to 24 months Eliminates the need to drain fuel before storage Ensures quick, easy starts by preventing gum and varnish build-up* Effective in Ethanol and Non-Ethanol gasoline For use in all gasoline engines such as vehicles, motorcycles, two-cycle, small engines, generators, and boats Usage Directions:Use STA-BIL Storage Fuel Stabilizer in any gasoline-powered vehicle or equipment users plan to store for 30 days or longer. This keeps the fuel fresh for up to 24 months during storage, eliminating the need to drain the tank. It works effectively in all gasoline blends, including ethanol-blended fuel, up to E-85. 1 ounce (30- milliliters) treats up to 2½ gallons (9.5 liters) of fuel. Use STA-BIL only with fresh fuel and keep the gas can or tank 95% full to avoid condensation buildup in the tank during storage. Run the engine for 5 minutes after adding the product to treat the entire fuel system. The product does not contain alcohol. Perfect for collector cars, generators, lawnmowers, snowblowers, etc.Perfect for Storing: GAS CANS: Fill a gas can with fresh fuel and immediately protect the fuel with STA-BIL Storage Fuel Stabilizer OUTDOOR POWER EQUIPMENT: When storing lawnmowers, weed whackers, leaf blowers, and other outdoor power equipment, first fill the gas can at the station and then add STA-BIL Storage Fuel Stabilizer to the gas can. Afterward, fill up the equipment (such as a trimmer, generator, or snow thrower, etc.) and run for a few minutes. This ensures that the entire fuel system is protected CLASSIC AUTOMOBILES: When storing the vehicle (modern or classic), fill the tank 95% with fresh fuel, add STA-BIL Storage Fuel Stabilizer, and run for a few minutes. This ensures that the entire fuel system is protected. Store it in a dry place that is protected from environmental elements. Place a car cover on for additional storage protection EVERYDAY AUTOMOBILES: When visiting the gas station to pour fresh fuel into the tank, top it off with STA-BIL Storage Fuel Stabilizer and run for a few minutes. This practice works best if the vehicle has been sitting for longer than usual due to working remotely, limited road trips, or less use of the vehicle overall MOTORCYCLES/ATVS/UTVS: When storing the toys, fill the tank 95% with fresh fuel, add the STA-BIL Storage Fuel Stabilizer, and run for a few minutes. This ensures that the entire fuel system is protected. Store it in a dry place that is protected from environmental elements. Place a motorcycle cover on for additional storage protection BOATS: When storing a jet ski or boat (inboard or outboard), fill the tank 95% with fresh fuel, add STA-BIL Storage Fuel Stabilizer, and run for a few minutes. This ensures that the entire fuel system is protected. Place a jet ski or boat cover on for additional storage protection Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 4"W x 10"L WT: 22.8 lbs

Read more less