Boat Outfitting

22lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC ApprovedThis composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder.Features: Non-corrosive 3-layer fiberglass composite cylindrical Ergonomic collar for a nice look The handle makes it easier to carry Type 1 valve Frequent Questions:Where can they be refilled?These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station.How safe are these cylinders?These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.”When do they need to be recertified?Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here.How long is the useful life of the cylinder?Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC.Will cylinders work in cold climates?The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix.Will the cylinders work in warm climates?The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T4 Through Tilt Tube Electro Steer - SaltwaterA unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum needed between main engine and kicker motor. Controlled by a 24′ cable and two-button handheld remote. Wireless option available.

Read more less

BOLT Actuator Wire Harness Extension - 20'20' Extension for BOLT ActuatorWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SLT Self-Leveling Tabs for Small BoatsGood things come in small packages. Now you can have the durability of a Bennett trim tab system with a simple, quick and easy installation. There is nothing to do inside the boat - only the mounting of two actuators and two tabs at the transom. It's an affordable, simple solution for small boats.The SLT uses some of the same high-quality, proven materials and durable design used in Bennett standard systems for more than 50 years. Your SLT kit includes: Two 14-gauge stainless steel trim tab assemblies with Bennett's exclusive interlocking hinge Two strong and flexible composite actuators All stainless steel hardware - no plastic! Bennett's no-hassle 5-year warranty on All Components With the SLT, you can get on plane quickly, improve your hole shot, reduce engine laboring, improve fuel efficiency and eliminate porpoising. The SLT reacts instantly to boat speed and water pressure by adding trim when it's needed. You get a better ride while the SLT does all the work.It's a value that can't be beat - a quality, durable system that's quick and easy to install and backed by the best customer service you will experience anywhere.Tab Size: 10" x 10"Boat Size: 17' - 20'WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Box Dimensions: 4"H x 10"W x 11"L WT: 8.8 lbs UPC: 666285146804 Quick Guide (pdf)

Read more less

Lexan cover protects electrohydraulic unit from occasional wash down. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator - thus eliminating external hoses subject to damage.A1200S is designed for installations where space is limited. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

StarPod Mini System with StarTower for Starlink Mini Dish (11.75 x 10.2″ Dish Size) *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board boats with a hardtop, radar arch, or other flat mounting surface. The waterproof housing incorporates an internal swivel tube, which allows the dish to be rotated to optimize the view of Starlink satellites if necessary. The 10-degree housing angle facilitates rainwater runoff to prevent signal degradation that can occur when water accumulates on a flat-mounted Starlink dish. The StarTower base is solidly built with 8 mm-thick aluminum and powder-coated with a high-gloss white finish. The bottom base of the StarTower measures 7″ square.Be sure to choose the right StarPod System to match your Starlink dish model: For the Starlink Mini Dish (11.75 x 10.2″ dish size): SP100 Housing Only for DIY mounting (7″ diameter circular mounting surface) SPS1000 for mounting a Starlink Mini Dish on a Flat Surface *You’re already on this product page!* SPS1001 for mounting a Starlink Mini Dish on a Horizontal Rail SPS1002 for mounting a Starlink Mini Dish on a Vertical Rail SPS1003 for mounting a Starlink Mini Dish on a Thule WingBar Evo Roof Rack (COMING SOON) SPS2000 for Starlink Gen2 Actuated Dish (20.2 x 11.9″ dish size) SPS3000 for Starlink Gen3 Standard Dish (23.4 x 15.07″ dish size) What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of signal while inside the thermoformed acrylic-capped ABS housing.Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.How do I mount a Starlink dish inside a StarPod?The kickstand base that comes with a Starlink Mini dish is not utilized when mounting inside a StarPod; only the dish itself is used. We recommend completing the initial Starlink setup process before mounting the dish inside a StarPod (refer to your Starlink setup/installation guide for this process). Once the initial Starlink setup process is complete, the dish can be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).All NavPods Feature: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Stainless Steel Hardware – We use all 316 stainless steel hardware that is supplied with each NavPod. Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Force™ Trolling Motor SkegProtect your motor and blade from impact by placing a standard skeg on your Force™ trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - WhiteA long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces.*Not compatible with all paints, Sikkens, Cetol, Deks, OljeWARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

ATO Y HarnessLength: 10' Extension CableWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Star-Tron Fuel Tank Cleaner - Concentrated Gas/Diesel Formula - 64 ozCleans sludge and fuel contaminants from gasoline and diesel tanks without expensive polishing. Designed for fuel tanks requiring rejuvenation of old, stale fuel. The enzyme-based formula disperses deposits for a cost-effective alternative to professional tank cleaning.Features: REVOLUTIONARY CLEANING POWER - Enzyme-based additive that cleans sludge and other fuel contaminants from gasoline and diesel tanks. COST-EFFECTIVE SOLUTION - A cost-effective alternative to expensive fuel polishing and tank cleaning. EASY TO USE - Simply add 1 fl. Oz. for every 4 gallons of gas or diesel fuel. VERSATILE APPLICATION - Works as a diesel fuel tank cleaner, diesel sludge remover, fuel cleaner, fuel system cleaner, and fuel tank cleaner. REJUVENATES OLD FUEL - Ideal for rejuvenating old, stale fuel in both gas and diesel tanks. DESIGNED FOR ALL TANKS - Safe to use in all gas tanks, diesel tanks, and even in fuel tank cleaning kits. TRUSTED BRAND - Trust the power of Star Tron, Star Tron enzyme fuel treatment, and Startron fuel tank cleaner. CONCENTRATED FORMULA - Concentrated formula that provides maximum cleaning power. ELIMINATES RUST AND SLUDGE - Perfect as a gas tank cleaner for rust and sludge. OPTIMIZES FUEL SYSTEM - Optimizes the performance of your fuel system for better efficiency. Directions:Add 1 fluid ounce for every 4 gallons of gas or diesel fuel. Allow to sit in the tank for a minimum of 24 hours before using rejuvenated fuel. Note: Keep spare fuel filters on hand. Star Tron Tank Cleaner will disperse hardened deposits and can load or clog filters. After two treatments, the fuel tank should be cleaned of all deposits and fuel filters will no longer load or clog up. After using this product to thoroughly clean fuel tanks, maintain the system with Star Tron Enzyme Fuel Treatment to prevent future carbon buildup and gumming. Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 6"W x 9"L WT: 4 lbs UPC: 071247936643

Read more less

12" x 12" Standard Trim Tab Kit w/Double Rocker Switch Kit - 12V Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.Kit includes:  (1) Switch Kit (2) 12-Gauge Stainless Steel Standard Finish Blades (2) 15054-001 Actuators with 6 foot Leads and Deutsch Connectors (2) 30133-103 Actuator Extension Wiring Harnesses- 20 foot length (2) 15085-001 Upper Mounting Brackets with Gland Seal (2) 50014-001 Lower Mounting Brackets Lenco Owner's/ Installation Manual Stainless Steel Mounting Hardware Specifications: Suggested Boat Length: 17' to 30' Length of Tab: 12" Width of Tab: 12" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Double Rocker Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Box Dimensions: 5"H x 13"W x 14"L WT: 19 lbs UPC: 874847000147

Read more less