Boat Outfitting

Helm/Bucket/Fixed Back Boat Seat Cover - Vinyl WhiteKeep your seats and consoles from cracking and fading! Boat seat and consolecovers are designed to protect your seats from damaging ultra-violet rays,wind, mildew and water. All Covers fold easily for storage and keep yourseats cool and clean!Dimensions: 24"H x 24"W x 22"DFeatures: Mildew and water repellant UV Protection Waterproof Air vents Heavy duty Drawstring hem Specifications: Color: White Cover Type: Seat Box Dimensions: 3"H x 10"W x 14"L WT: 1.4 lbs UPC: 040011114839

Read more less

Charlevoix® Flag Clip For 7/8" - 1" PoleThe original Charlevoix Flag Clip ends the trouble of attaching your flag to a standard flag or stern light pole. This simple onepiece clip attaches semi-permanently to your pole and will keep your flag securely in place at speeds up to 50 miles per hour. Flags can be attached or removed in seconds. The clips can also be removed, if desired. Specifications: Type: Flags & Flag Poles Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 040011579287

Read more less

Riptide Fortrex 80 Saltwater Bow-Mount Trolling Motor - 24v-80lb-62"Saltwater Bow MountArm yourself with the ultimate weapon against saltwater. The all-new Riptide? SF features fewer moving parts, tighter tolerances, advanced corrosion protection and our revolutionary new Mono-Arm. You get no-nonsense power, stealth operation and rugged, reliable performance - everything you need to put saltwater in its place.Mono-Arm DesignSometimes, the simplest solution is best. In this case, it's a revolution. Riptide SF's innovative Mono-Arm Design features an extruded, anodized aluminum, structural beam that operates with no metal-to-metal contact and 75% less torsion. A single hinge point and rear pivot bearing with 20% more surface area deliver less wear, longer life, and quieter operation than traditional motor mounts.Counter-Tension Stabilizer (CTS)CTS uses an integrated spring that applies force whether the motor's stowed or deployed. On the water, that translates to a motor with no play, no give, reduced steering torque and silent operation.Lift-AssistRiptide SF's Lift-Assist design cuts the weight of stow and deploy in half, making it as easy as lifting your SUV tailgate. It features a stainless steel, nitrogen-charged gas spring to get you in and out of the water with ease.Removable Bowguard 360°Lifting the motor and bowguard off of the mount is now even easier on Riptide SF - just remove a single cap screw. The Bowguard 360'™ also features a dual bearing system that eliminates noise and allows for improved breakaways from any angle.Quick-Lock Cam Depth AdjusterChange depths simply and securely with the Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.Tilt/Extend TillerGet the best of both worlds on your hand control motor with the new Tilt/Extend Tiller. It can both tilt (up to 45°) and extend (6") to fit the way you fish.Push-to-Test Battery Gauge - Riptide SFGet an instant "state of charge" with this easy-to-read gauge.Digital MaximizerDigital Maximizer™ controls and optimizes power to extend battery life and reduce damaging heat. You'll stay on the water up to five times longer on a single charge.Weedless Wedge 2 PropPush weeds away and take on the thick stuff without battery-draining chopping and hacking. Weedless Wedge™ 2 features swept-back, flared blades for unrelenting, reliable prop performance.Advanced Corrosion ProtectionRiptide motors are impervious to saltwater's corrosive effects, thanks to premium-grade marine alloys and aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil TGIC polyester, powder coat paint. When it's all done, you're left with unequaled corrosion protection.Full Encapsulated ElectronicsMarine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. Also, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against saltwaterSacrificial AnodeGalvanic corrosion occurs when two dissimilar metals come into electrical contact through saltwater. Riptide fights back with a sacrificial zinc anode, a composite shaft and properly balanced materials that are close in electrical potential. The result is a motor that's completely protected from saltwater's destructive forces.Two-Year WarrantyThis motor is backed up with Minn Kota's two-year warrantySpecifications Control: Tilt/Extend Tiller Volts: 24 Max Thrust: 80 lbs. Shaft Length: 62" Speed Control: Variable Max. Amp Draw: 56 Prop: Weedless Wedge 2 (MKP-33) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Included Propeller: MKP-33 Autopilot: No Control Type: Tilt/Extend Tiller Mounting Style: Bow Salt Water/Fresh Water: Salt Shaft Length (Inches): 62" Thrust (Pounds): 80 lbs Built-In Transducer: No Voltage - Input Range (Volts): 24v Series: Riptide Box Dimensions: 7"H x 19"W x 75"L WT: 68 lbs UPC: 029402032075 Owner's Manual (pdf)

Read more less

Euro Black 2" Tank Level Gauge - Potable WaterPerimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level.2" - Hole size: 2.0625" (53mm) Specifications: Anti-scratch glass lens 12 VDC negative ground Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N GP9324*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Gauge Type: Water Level Gauge Size: 2" Series: Euro Black Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 3.3 lbs UPC: 759266128309

Read more less

Dogbone Stabilizer for Spy™ PoleThe dogbone stabilizer securely braces the Spy pole to Force® and Force Pro trolling motors while allowing independent rotation and shaft height adjustments. The stabilizer is required on Spy pole whenever two transducers are installed on the pole.

Read more less

12"x12" Edge Mount Trim Tab Kit with Pro Control™ AutoSpecifications: Length x Width: 12"x12" Boat Length: 17'-30' Hinge Height: 2" (5.1cm) Minimum Transom Height: 11" (27.9cm) Keypad: Auto Kit Includes: (1) Pro Control Auto Keypad Kit (15174-107) (1) Pro Control Auto IMU (15180-001) (2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: Standard blades - with a 5/8" (1.6 cm) flared trailing edge. Edge Mount blades - with 1" (2.5 cm) turned-up edges a 5-degree taper on both sides to the trailing edge) and a 1/8" (3.2 mm) diameter hinge pin. (2) 2.25” Stroke SD Pro Actuators, 11.5” pin to pin (15189-001) (6) Micro C Tee Connector (30267-001DD) Micro C Power Cable with Fuse and Ground (15197-101) (2) 6’ (1.82 m) Micro C Drop cables (15199-101), (1) 15’ (4.57 m) (30269-001 and (1) 25’ (7.62 m) (30269-004) Micro C Drop cables (2) 6 Pin Deutsch to Micro C Actuator Network Adapter Cable (30377-001) (2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001) (1) Wake Signal Adapter for Non-Mercury Systems (15207-101) (2) Corrosion proof Upper Mounting Brackets with gland seal (15193-101) (2) Corrosion-proof Lower Mounting Brackets (15194-101)

Read more less

Fuse Strip C30 - 125 AmpFeatures: Fuse Strip C30 125 Amp

Read more less

Flybridge Kit f/ LED Indicator Key Pad f/All-In-One Integrated Tactile Switch - 20'Add a second station key pad to your new Integrated Tactile Switch by plugging into the existing harness.Includes LED Indicator Key Pad & Desired Shielded Length Wire HarnessWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Hidden Mount Mini Compact Horn Hidden Mount Mini Compact Horn is constructed of powder coated steel. At 107 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577068. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Voltage - Input Range (Volts): 12v Box Dimensions: 3"H x 6"W x 9"L WT: 0.75 lbs UPC: 035514432085

Read more less

Lanocote Rust & Corrosion Solution - 16 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features: Prevents Thread Freeze-up Combats Galvanic Reaction of Dissimilar Metals Seals Porous Surfaces Neutralizes Acids, Alkalies, & Salts Prevents Corrosion on Electronic Contacts Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 4"W x 4"L WT: 0.95 lbs UPC: 028026136268

Read more less

Flush Mount Combo Drink Holder with Drain Fitting - Stamped 304 Stainless SteelFlush Mount Combo Drink Holders with Drain Fittings feature a dual-purpose design that allows the use of beverage cans with or without insulated can wraps, as well as most standard-size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Includes mounting gasket. Constructed of corrosion-resistant stamped 304 stainless steel.Specifications:Hole Required: 3-5/8" Specifications: Type: Drink Holders Box Dimensions: 4"H x 4"W x 4"L WT: 0.3 lbs

Read more less

UCX-17 PRO Pontoon Mirror/Bracket Kit - SilverThe UCX-17 PRO is perfect for pontoons and center-console boats where there is not a convenient place to install a mirror.  It easily installs on virtually any console at any angle.  It comes standard with the VR-100 PRO HD panoramic mirror.  It quickly folds down or removes for storage. Ball-and-socket joints on both ends allow for infinite adjustment.  The UCX-17 PRO base and arm are machined from aerospace-grade billet aluminum and are electropolished and anodized for a premium finish that will last for years of maintenance-free use. In the Box: Mirror Base and Arm - 17" (Silver) VR-100 PRO HD Panoramic Mirror (Black) Set of 4 Nuts, Washers, and Bolts 7/16″ Wrench Easy-to-Follow Installation Instructions with Mounting Template *Does not include cover*Sold as an Individual Quick Guide (pdf)

Read more less