Boat Outfitting

Type A Controller f/Boats with an Existing Autopliot No need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot Drive When the Intellisteer Wireless Controller is activated it will disconnect the autopilot and provide wireless jog steering control from anywhere on the boat When the Intellisteer Wireless Controller is turned off, the Autopilot will function as before Specifications: Type: Parts Box Dimensions: 3"H x 8"W x 10"L WT: 2 lbs UPC: 628309263355 Brochure (pdf)

Read more less

36" Fish Ruler - Mocha Brushed with SeaDek LogoSeaDek fish rulers offer a permanent and attractive alternative to stickers, tape measures, and other measuring devices.  Offered in a 3mm thickness with a brushed texture, these rulers are 4"x 38", feature laser-etched numbers that will not fade or break down, and utilize peel-and-stick 3M™ pressure sensitive adhesive for easy installation. As well as providing traction underfoot, SeaDek fish rulers provide a non-skid surface for holding slippery fish in place for measurement. *Not to be used as a legal measuring device as the application may cause distortion.Technical Specifications: Dimensions  (L x W x Thickness) - 38" x 4"" x .2" Color - Mocha Brushed with SeaDek Logo Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Embossed 4-Piece Step Kit - MicaGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry.  Step kits are backed with a 3M pressure-sensitive adhesive to provide an easy peel-and-stick application.Technical Specifications: Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2" Color - Mica Material - Closed cell foam *Sold as an Individual

Read more less

Embossed 4-Piece Step Kit - Seafoam GreenGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry.  Step kits are backed with a 3M pressure-sensitive adhesive to provide an easy peel-and-stick application.Technical Specifications: Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2" Color - Seafoam Green Material - Closed cell foam *Sold as an Individual

Read more less

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Read more less

Express® Mach3™ OS™ - Left Hand - Stainless Steel Propeller - OS-1623-L - 3-Blade - 15.6" x 23 PitchThe Express® Mach3™ OS™ Series of Stainless Steel Propellers are the next step in the evolution of our very popular larger diameter VO series. Our Engineers and Propeller Experts made improvements to the cup, leading and trailing edges, and the aggressive progressive rake and blade geometry that are Turning Point hallmarks. These modifications have produced a propeller with excellent hole shot, impressive bow lift, and class leading cornering. The Express Mach3 OS is perfectly matched to large horsepower bay boats, offshore center consoles, and high horsepower pontoons/tri-toons. It will fit all 90hp and larger 4.75" gearcase outboards from all engine manufacturers, and Mercury® Alpha One™ and Bravo One™, and Volvo® Penta® SX sterndrives. Large diameter three blade propellers offer great mid-range fuel economy in many applications. Whether you are looking to maximize your time on the water, extend your cruise range, or just stretch your fuel dollars, the Express Mach3 OS is a great choice to get the most out of your boat.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 15.6" Material: Stainless Steel Pitch: 23 Rotation: Left Box Dimensions: 9"H x 16"W x 16"L WT: 17.95 lbs UPC: 652480206566 Quick Guide (pdf)Brochure (pdf)

Read more less

Reed Switch Fuel Sender - 400 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 15.75" (400mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs UPC: 754059064444

Read more less

Reed Switch Fuel Sender - 150 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 6" (150mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.6 lbs UPC: 754059064352

Read more less

Reed Switch Fuel Sender - 350 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 13.8" (350mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs UPC: 754059064437

Read more less

Pinpoint GPS Gateway KitThe MotorGuide Gateway Kit will take your fishing technology to the ultimate levelThe MotorGuide Gateway Kit will connect a Pinpoint GPS-equipped MotorGuide Xi5 trolling motor to a compatible Lowrance fishfinder/chartplotter through an existing NMEA 2000 network.Kit Includes: 1 - Pinpoint GPS-NMEA 2000 Gateway Cable (6'/1.8m) 1 - NMEA 2000 T-Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Express® Mach4™ - Right Hand - Stainless Steel Propeller - EX-1423-4 - 4-Blade - 14.3" x 23 PitchThe Prop that put the "four" in Performance! Turning Point's Four Blade revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: two blades utilize the high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift.These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.Now manufactured in the Industry leading TP17 stainless, the Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rotation: Right Pitch: 23 Material: Stainless Steel Diameter (Inches): 14" Box Dimensions: 8"H x 16"W x 16"L WT: 17.05 lbs UPC: 652480207013 Quick Guide (pdf)Brochure (pdf)

Read more less

T5 Through Tilt Tube Electro Steer - SaltwaterT5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the main engine and kicker.Mounting hardware included. Controlled by a 2 button handheld remote with a 24′ cable. (See optional wireless remote 55-0105).

Read more less