Boat Outfitting

LinkUp Analog to NMEA 2000 GatewayThe resistive-type LinkUp gateway provides an easy method to convert vessel and engine information to NMEA 2000.Easily installed, the LinkUp Gateway replaces the original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone while still being complaint with the NMEA 2000 certification requirements. Configuring the LinkUp Gateway is simple using a mobile device and the companion LinkUp Configuration App for Android or IOS.Each device has a built-in passive NFC antenna, so the parameters of the sensors are wirelessly configured to type, instance and warning threshold on the mobile device which is then "tapped" against the LinkUp device for instant data download. Features: User-friendly configuration through wireless interface and companion smartphone App Sensor Cable length - 25cm NMEA 2000 Cable length - 25 cm Tap to download parameters Mobile App for Android or IOS No power required to program No certification required Bi-directional communication, programming interface or data recovery Supported Sensors: Fuel Level Oil/Boost Pressure Fresh/Waste Water Level Oil/Gear Oil/Coolant Temperature Trim Tabs Rudder Angle Technical Specifications: Standard M12 NMEA 2000 plug LED Notification  Operating Voltage - 6 - 16.5V Nominal Voltage - 12 V (from NMEA 2000 network) IPX7 Rated Sensor Plug - Superseal Female 2 Pin Counterpart Sensor Plug - - Superseal Male 2 Pin *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

ATLAS™ 10" Set Back Hydraulic Jack Plate PolishedRated for engines up to 300hp or up to 625 pounds dry weight. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Force™ Trolling Motor SkegProtect your motor and blade from impact by placing a standard skeg on your Force™ trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance. Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props Built of durable plastic WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Material: Plastic Box Dimensions: 2"H x 6"W x 16"L WT: 1.02 lbs UPC: 022697137074

Read more less

Temperature Sender 250°F/120°C - 3/8-18 NPTFFeatures: Ground - Standard Connection - Knurled Nut Voltage - 6-24V WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Gold Box Dimensions: 2"H x 2"W x 5"L WT: 0.1 lbs UPC: 754059002903

Read more less

Flush Mount Fixing Bracket - ViewLine GaugesFor flush assembly.  Put the instrument into the drill hole from the back. Adjust the instrument so that the gauge is level and fasten it to the stud bolts on the rear side of the panel using the flush mount fixing bracket.Features: Designed for 52mm, 85mm and 110mm Gauges For Backside Panel Installation *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Swivl-Eze Lock'N-Pin 3/4" Pin Seat Mount - Zinc CoatedSpecifications: Zinc-plated Tilt: 3 degrees Pin (inch): 2-3/4" Steel Pin with Spring ABYC Code: B (not to be used at the helm/driver position) Installed Height (inch): 2" #1 supplier of 3/4" pin seating hardware. Here's why: The 3/4" system gives you outstanding economical performance The design is proven by decades of experience The Difference: The patented Lock'N-Pin system leads the industry in safety Lock'N-Pin prevents unintentional detachment for seat mounts, posts, and bases Lock'N-Pin products exceed ABYC Standard H31.6.1 Not recommended to interchange with other manufacturers' products Quick Guide (pdf)

Read more less

Professional 85MM (3-3/8") Rudder Angle Indicator for NMEA 0183Specially designed to fit into the standard 85mm panel cut, the Professional Rudder Angle Indicator is developed to suit commercial applications thanks to the embedded NMEA 0183 transceiver - which makes it operable with most of the professional autopilots out in the field - and the large 270° dial scale and Red illumination which makes it well readable and accurate in the indication.It supports both 12V and 24V systems, and it is designed to resist the harshest environment thanks to its extended operating temperature from -30°C to +80°C and IPX7 protection class.Able to support the analogue 3-180 Ohm and 0-5V rudder sensors, the Professional Rudder Angle Indicator also repeats the rudder angle data via NMEA 0183 to multiple gauges connected in series to it.The embedded infrared (IR) pushbutton allows for a user-friendly fine tuning of the predefined calibration.Features: Designed for NMEA 0183 Easy programing and installation Technical Specifications: Operating Voltage - 8 to 32 V Protection Class - IP6K7 Illumination - Red LED Dial - Black w/graphics Pointer - Red Illuminated Lens - Plastic Double Lens (anti-reflective) Operating Temp. - -40°C to 115°C Connector - Molex MX150 - 12 pin In the Box: Gauge  Wire Harness Mounting Spinlock Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 8-32v Series: OceanLink Gauge Type: Rudder Angle Gauge Size: 3-3/8" Box Set: No Box Dimensions: 4"H x 6"W x 6"L WT: 0.64 lbs UPC: 7640178729452

Read more less

2-Way Boat Alarm SystemProtects your boat and valuable equipment from theft.Features: Shock Sensor Detects Intruders Alerts you up to 3000 Yards when Activated Two Way Remote Alerts with Sound, Light & Vibration Up to 3000 Yards Response and 1000 Yards Transmit 128 db Alarm Horn Waterproof Main Engine Shock Sensor with Sensitivity Adjustment Easy Installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Sensors Included: 2 Sensor Quantity - Max: 2 Box Dimensions: 2"H x 8"W x 8"L WT: 0.8 lbs UPC: 733572073454

Read more less

Racktech™ - 2.0 High Efficiency Rack & Pinion System Kit - 17' CableThe Racktech Rack and Pinion steering package offers a compact installation and features the TM87O cable with an armor-wrapped stainless steel core for maximum efficiency and minimal lost motion.Ideal for boats with minimal clearance behind the dash, the Racktech is recommended for power-assisted sterndrives and other applications with minimal rudder torque.Includes: G87 Helm X34 Bezel  Tm870 preassembled Rack 17' Cable

Read more less

Racktech™ - 2.0 High Efficiency Rack & Pinion System Kit - 20' CableThe Racktech Rack and Pinion steering package offers a compact installation and features the TM87O cable with an armor-wrapped stainless steel core for maximum efficiency and minimal lost motion.Ideal for boats with minimal clearance behind the dash, the Racktech is recommended for power-assisted sterndrives and other applications with minimal rudder torque.Includes: G87 Helm X34 Bezel  Tm870 preassembled Rack 20' Cable

Read more less

30 AMP Angled RV Dual Configuration Cordset - 30'The angled cordsets produced by SmartPlug are the culmination of extensive research and valuable customer feedback.Features: Easy one-handed engagement and disengagement of your shore power connection Relieves stress on the structure to protect your Boat/RV Cord rests close to the side, reducing run-over risk and trip hazards Easier to store and coil Available in 30A and 50A configurations Specifications: Amperage: 30a Length: 30' Type: Cables Voltage: 125v Box Dimensions: 5"H x 15"W x 16"L WT: 11 lbs UPC: 682500442483

Read more less