Communication - Antenna Mounts & Accessories
Shakespeare 4700-1 12" Stainless Steel Extension [4700-1]
Shakespeare Style 4700-1 Extension MastShakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like. 1' long Stainless steel construction Standard 1" - 14 threads, male upper, female lower One inch diameter Durable and attractive Specifications: Type: Extension Box Dimensions: 2"H x 2"W x 14"L WT: 1.1 lbs UPC: 719441110628
$49.99$44.50
Shakespeare Quick Connect Nylon Mount w/Cable f/Quick Connect Antenna [QCM-N]
Quick Connect Nylon Mount with Cable for Quick Connect AntennaNylon Ratchet Mount with Cable for Quick Connect Series Antennas.
$54.99$33.50
Shakespeare 5228-4 4' Heavy - Duty Extension Mast [5228-4]
Shakespeare Galaxy® Style 5228-4 4' Heavy-duty Extension MastLike the 5228, but 4' length (nominal). Constructed of high-quality Shakespeare white fiberglass, and finished to match Galaxy antennas. This 1 1/2" d"iameter extension mast can be used to increase height of an antenna and thus improve effective range, or to boost placement of an antenna above on-board obstructions.IMPORTANT! If the combined length of your antenna and all extensions is more than 8 feet. you MUST use an upper support bracket Stainless steel upper and lower ferrules with standard 1" - 14 thread Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit One section, actual length 44" Shakespeare Limited Warranty: 5-Years Specifications: Type: Extension Box Dimensions: 3"H x 3"W x 55"L WT: 2.8 lbs UPC: 719441200077 Quick Guide (pdf)
$199.99$140.50
Shakespeare 35 SRC-35 Extension Cable [SRC-35]
35' SRC-35 Extension Cable For longer cables runs, pick the appropriate length Shakespeare SRC Series extension cable for your installation.These cable kits must be run as a single piece and cannot be joined together.Features: Cable length - 35' Pre-installed SMB and RNC connectors Cable material - RG-58 Compatible with: SRA-25 antenna SRA-40 antenna SRA-50 antenna *Sold as an Individual Specifications: Type: Cables Box Dimensions: 2"H x 10"W x 10"L WT: 1.2 lbs UPC: 719441170158
$54.99$53.50
Shakespeare 4184 Cable Outlet [4184]
Shakespeare Style 4184 Cable OutletUse this attractive, chromed brass, cable outlet to neatly pass cables through bulkheads. Its rubber internal grommet grips the cable and keeps water out. For RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max® coax cables. Specifications: Type: Misc Box Dimensions: 1"H x 3"W x 6"L WT: 0.2 lbs UPC: 719441111083
$14.50
Shakespeare 4352 10' AM / FM Extension Cable [4352]
Shakespeare Style 4352AM/FM STEREO 10' EXTENSION CABLE KITThis handy kit includes 93-ohm RG-62 cable with male and female Motorola connectors installed. Specifications: Type: Extension Box Dimensions: 1"H x 6"W x 8"L WT: 0.38 lbs UPC: 719441400064
$54.99$44.50
Shakespeare 50 SRC-50 Extension Cable [SRC-50]
50' SRC-50 Extension CableFor longer cables runs, pick the appropriate length Shakespeare SRC Series cable kit for your installation. These cable kits must be run as a single piece and cannot be joined together.Features: Cable length - 50' Pre-installed SMB and RNC connectors Cable material - RG-58 Compatible with: SRA-25 antenna SRA-40 antenna SRA-50 antenna *Sold as an Individual Specifications: Type: Cables Box Dimensions: 2"H x 10"W x 10"L WT: 1.5 lbs UPC: 719441170165
$79.99$62.50
Sea-Dog Fixed Antenna Base 4-1/4" Size w/1"-14 Thread Formed 304 Stainless Steel [329515]
Fixed Antenna Base 4-1/4" Size with 1"-14 Thread Formed 304 Stainless SteelFixed Antenna Base features a flange mount base. Designed to allow wire to feed directly through the base, eliminating the need for a separate cable grommet. Accepts any standard antenna with 1"-14 threads, but is ideal for TV, Loran, GPS, and VHF antennas. Constructed of corrosion resistant formed 304 stainless steel. Installs with three 1/4” RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 3"W x 5"L WT: 0.4 lbs UPC: 035514329781
$24.50$18.50
Shakespeare 4357-S Base-Loaded AM / FM / VHF Separator [4357-S]
Shakespeare Style 4357-SAM/FM/VHF MARINE BAND SEPARATOREliminate the need for separate AM/FM antennas and operate AM/FM and VHF radios at the same time without interfering with VHF radio performance.Complete with 10' RG-62 AM/FM cable, 3' RG-58 VHF cable, and connector installed. Works with all types of marine VHF antennas. Specifications: Type: Misc Box Dimensions: 1"H x 6"W x 8"L WT: 0.65 lbs UPC: 719441400095 Quick Guide (pdf)
$109.99$72.50
Majestic Mast Mount Bracket f/UFO X TV Antenna [MJUFOXMMB]
Mast Mount Bracket for UFO X TV AntennaHigh quality, stainless steel bracket specifically designed for the UFO X mast mounting. This pole has been designed mainly for the Majestic UFO when mounting on masts to allow the antenna to be easily fitted. Simply install the bracket to the side of the mast and then screw the antenna to the top height near the top of the mast. This will assist in getting the best possible signal.
$35.50
Rupp Threaded Antenna Support w/6" Flat Mount, Oval 4-Way Base & 1.5" Collar [PAK-0006]
Threaded Antenna Support w/6" Flat Mount, Oval 4-Way Base & 1.5" CollarA perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. Our locking collar holds the antenna securely, yet unlocks conveniently for lowering. Made of forged and anodized aluminum for strength and long lasting beauty. Threaded mounting packages are ideal for tuna towers and tops. Features: Mount Type: Flat Base: Oval 4-Way Pipe: 6" Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 6"W x 11"L WT: 1.2 lbs UPC: 784703000566
$235.00$201.50
Whitecap Heavy-Duty Ratchet Antenna Mount - 316 Stainless Steel [S-1802BC]
Heavy-Duty Ratchet Antenna Mount - 316 Stainless SteelFeatures: 316 stainless steel construction Lay-down handle quickly loosens the ratchet for a fast, easy antenna drop Features standard 1”-14 male thread mount with a hole for a Loran cable The lightweight mount may be used self-supporting with an antenna up to 15’ long Both mounts feature two ratchets for both up/down and side-to-side adjustments Flat base for deck mounting Base dimensions: 3½” x 2½”
$135.99$73.50