Communication - Antenna Mounts & Accessories

GPS Antenna Rail Mount - Stainless Steel for 1"-1.25" Rails & 1"-14 ThreadsEdson's Stainless GPS Antenna Rail Mount Arm features a unique design that keeps your wiring completely hidden inside the mount and railing. The 2-piece design clamps to any 1", 1-1/8"or 1-1/4" horizontal railing. Male 1"-14 threads accept most common GPS or VHF antennas. Cast of solid 316 stainless with rubber bushings. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 7"L WT: 0.9 lbs UPC: 796744018769 Quick Guide (pdf)

Read more less

Shakespeare Style 4184 Cable OutletUse this attractive, chromed brass, cable outlet to neatly pass cables through bulkheads. Its rubber internal grommet grips the cable and keeps water out. For RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max® coax cables. Specifications: Type: Misc Box Dimensions: 1"H x 3"W x 6"L WT: 0.2 lbs UPC: 719441111083

Read more less

50' SRC-50 Extension CableFor longer cables runs, pick the appropriate length Shakespeare SRC Series cable kit for your installation. These cable kits must be run as a single piece and cannot be joined together.Features: Cable length - 50' Pre-installed SMB and RNC connectors Cable material - RG-58 Compatible with: SRA-25 antenna SRA-40 antenna SRA-50 antenna *Sold as an Individual  Specifications: Type: Cables Box Dimensions: 2"H x 10"W x 10"L WT: 1.5 lbs UPC: 719441170165

Read more less

4190 Rail MountRatchet action, designed for quick and easy installation on 7/8 and 1 in. vertical or horizontal rails. Handles antennas up to 8 ft Special cable slot eliminates removal of most factory-installed connectors Standard 1in.-14 thread (male) Construction: Stainless steel Mount type: Rail Cable pass through: Special Cable Slot Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 5"L WT: 1.3 lbs UPC: 719441110253 Quick Guide (pdf)

Read more less

TB-01 T-Bar Mount for GPS/VHF Antenna Mount The T-Bar can hold up to four GPS/VHF antennas, and can easily be installed onto pushpit rails and decks to provide the perfect installation solution for power and sail boat owners looking for the secure and neat storage of antennas.Features:Designed to fit up to four (4) GPS/VHF antennas The aerial bar can be rotated during installation to determine the ideal position for each antenna. Internal cable routing to ensure a neat appearance once installed. Perfect for mounting onto a variety of surfaces: guard rails or stanchions, 'A' frames and cabin roofs.  Technical Specifications: Material - Stainless Steel Height - 9.36" (238mm) In the Box: Mount Mounting hardware  Installation manual *Sold as an Individual Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 19"L WT: 3.8 lbs UPC: 5060114734159 Quick Guide (pdf)

Read more less

TracNet Coastal Mounting BracketYou can mount the antenna with any standard stainless antenna mount available from your local marine equipment supplier! Use this bracket with a standard threaded steel mount (1"-14 threads) to make the TracNet Coastal or TracNet Coastal Pro a drop-in replacement for a Shakespeare SeaWatch or Glomex off-air antenna. Just thread the mounting nut and mounting bracket onto the antenna mount, then screw the antenna to the mounting bracket - that's all there is to it! Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 10"W x 10"L WT: 1.8 lbs UPC: 028327009193

Read more less

Edson 5" Stainless Antenna Standoff - Antennas Up To 1.5" DiameterThese strong and attractive standoffs will limit the amount of wear and tear on your antennas while powering through rough seas. Made from investment cast 316 stainless, they will never break like plastic. Fitting all antennas up to 1.5" in diameter, they are available in three sizes, virtually eliminating the need to shim the standoff or antenna base. The clasp is held closed with a quick release pin allowing for quick antenna takedown to go under bridges or for trailering. Each clasp is padded providing a secure, rattle free closure. The combination of a highly polished and vapor blast gray finish enhance the sleek, attractive styling. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 9"L WT: 1.6 lbs UPC: 796744001273

Read more less

Galaxy® Style 5228 8' Heavy-duty Extension MastConstructed of high-quality Shakespeare white fiberglass, and finished to match Galaxy antennas. This 1-1/2" diameter extension mast can be used to increase height of an antenna and thus improve effective range, or to boost placement of an antenna above on-board obstructions.IMPORTANT! If the combined length of your antenna and all extensions is more than 8', users MUST use an upper support bracketFeatures: Reduced length version Stainless steel upper and lower ferrules with standard 1" - 14 thread Mount: A Style 409-R or 410-R Mounting Kit is required One section, actual length 95" Shakespeare Limited Warranty: 5-Years Specifications: Type: Extension Box Dimensions: 2"H x 2"W x 95"L WT: 2.4 lbs UPC: 719441200060 Quick Guide (pdf)

Read more less

Grand Slam 860 Electric VHF Antenna MountThe Grand Slam 850 Electric VHF Antenna Mount! Designed with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Features: Standard 1”-14 thread (male) shaft to accept standard VHF antennas up to 8' No under-mount clearance required Machined / Anodized aluminum body with a light brushed finish Threaded shaft for consistent lift and descent Brass bearings for smooth operation Features breakaway pin for manual operation Includes 6” lead of 20-gauge wire from the base 12-volt DC power supply for lift and descent Accepts 3A fuse in the main +12 VDC power feed (not included) Pairs with Backing Plate (BP-0850AEY), which is sold separately Pairs with 6º Wedge Plate (WP-850-950), which is sold separately Sold individually Made in the USA 1-year limited warranty

Read more less

PowerBase Antenna - White Powered Fold-Down Antenna BaseThe intelligent, automated folding Antenna base. PowerBase easily stows and deploys lights and antennas with the push of a button.PowerBase is the only intelligent light/antenna with object detection technology: SafeGuard Breakaway: In the event of an impact, the powerbase will safely return to a stowed position preventing potential damage to the fiberglass top SmartDeploy Backdrive: In the event of a blocked deployment, PowerBase senses an obstruction and reverses the light/antenna back to its starting position PowerBase is designed for worry-free installation and operation from the assembly line to the marina: Standardized mounting patterns allow for upgradeability Intuitive control without switch limitations PowerBase is compatible/built with the leading industry equipment:For use with antennas up to 8 ft. In length (Powerbase Antenna)Compatibility:Compatible with all leading 1-1/4" threaded VHF Antennas (8ft or less in length)Required for installation (not included): 7/32” & 3/4” Drill Bits #2 Phillips Driver Marine Grade Sealant PTFE Lubricant 2x 1-1/4” Fender Washers and 10-24 Nuts (If Through-Hole Mounting) 2-Position SPST Switch (with LED Backlight) PowerBase Antenna not included Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Threaded Upper Antenna Support AssemblyIncludes forged aluminum "yoke' with 7/8-14 thread (09-1260-23),  2-piece Antenna collar (09-1258-2PC) for 1.5" OD ANTENNAS and black anodized Jam nut (03-1103-23). Select antenna collar option in drop-down menu above.

Read more less

Threaded Antenna Support w/6" Flat Mount, Oval 4-Way Base & 1.5" CollarA perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. Our locking collar holds the antenna securely, yet unlocks conveniently for lowering. Made of forged and anodized aluminum for strength and long lasting beauty. Threaded mounting packages are ideal for tuna towers and tops. Features: Mount Type: Flat Base: Oval 4-Way Pipe: 6" Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 6"W x 11"L WT: 1.2 lbs UPC: 784703000566

Read more less