Communication

M510BB 21 Black Box VHF with Black Command Mic & 3 Command Mic PortsIcom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied black CommandMic™ provides all the safety and communication functions for commercial and leisure boaters.Clean Installation for Limited Helm SpaceThe M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™.*Two OPC-1541 cables are required for the 60 ft installationCommandMic™ StationsAdd up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.AIS ReceiveThe M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display).DSC Functionality and Remote ControlIn addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.NMEA200® and NMEA 0183-HS®The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.Class D DSC FunctionalityOn the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.Loud One-Way RX HailerThe built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker.Active Noise CancellingThe Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: Black Remote Stations: Up to 3 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C /  –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC):  25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications:  Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω) Specifications: AIS: Yes Built-In GPS: Yes Color: Black Hailer: Yes Intercom Capability: Yes NMEA 2000: Yes Remote Mic Capable: Yes Box Dimensions: 6"H x 9"W x 10"L WT: 5.3 lbs UPC: 731797044600 Brochure (pdf)

Read more less

Charge Cradle for HX40Single charging cradle for Standard's HX40 Handheld Radio.*Requires power cable sold separately Specifications: Type: Chargers Box Dimensions: 2"H x 3"W x 3"L WT: 0.15 lbs

Read more less

Charge Cradle for HX380Single charging cradle for Standard's HX380 Handheld Radio.*Requires power cable sold separately Specifications: Type: Chargers Box Dimensions: 3"H x 3"W x 3"L WT: 0.25 lbs

Read more less

Charge Cradle for HX210Single charging cradle for Standard's HX210 Handheld Radio.*Requires power cable sold separately Specifications: Type: Chargers Box Dimensions: 3"H x 3"W x 3"L WT: 0.2 lbs

Read more less

Handheld VHF Hangar BracketThe SCH-11 Hangar Bracket is designed tosecure all Standard Horizon Handheld VHFradios to a bulkhead. By sliding the Belt Clip into the Hangar Bracket the radio will stay secure on any bulkhead or vertical surface. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 788026160945

Read more less

Replacement Rechargeable Battery Pack for Atlantis 270Specifications: Li-Ion Polymer Rechargeable Battery Replacement Battery Pack 7.4VDC 1100mAh 8.14Wh Specifically for Uniden's Atlantis 270

Read more less

Non-Powered Handset Cradle for Cortex H1 Tethered & H1P Portable HandsetMount your handset anywhere on the boat with the non-powered handset cradle. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. Pair with a RAILBLAZA or RAM Mount style adapter to use with your favorite mounting solution. The non-powered handset cradle can be used with either the H1(tethered) or H1P (portable) handsets.

Read more less

Compact Speaker MicThe SSM-17H is fully compatible with all the handheld transceivers that have a speaker mic connection. The audio power, quality and design of the SSM-17H are improvements as compared to the MH-57A4B.

Read more less

DC Charger with Bare WireWorks with all hand helds except HX400 & HX400IS*May Require Charging Cradle Sold Separately Specifications: Type: Chargers Box Dimensions: 1"H x 1"W x 3"L WT: 0.2 lbs UPC: 788026005215

Read more less

1400 mAh Ni-MH replacement battery for HX370S. Specifications: Type: Batteries Box Dimensions: 1"H x 3"W x 5"L WT: 0.4 lbs UPC: 788026103560

Read more less

Threaded Antenna Support w/6" Pipe Mount, Oval 4-Way Base & 1.5" CollarA perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. Our locking collar holds the antenna securely, yet unlocks conveniently for lowering. Made of forged and anodized aluminum for strength and long lasting beauty. Threaded mounting packages are ideal for tuna towers and tops. Features: Mount Type: Pipe Base: Oval 4-Way Pipe: 6" Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 6"W x 11"L WT: 1.2 lbs UPC: 784703000559

Read more less

MBF9 Flush Mount Kit for M510 & M510 EVOThis mount is a flush mount kit for Icom's M510 and M510 EVO marine transceivers.Compatible Devices: M510 Marine Transceiver  M510 EVO Transceiver Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.25 lbs UPC: 731797045461

Read more less