Electrical - Accessories

ROKK SC-USB-F1 Flip Pro Waterproof USB Socket - Dual PortFlip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard.When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements.  When charging, it quickly locks open to protect your cables when plugged in.Featuring a super-compact footprint, Flip Pro is constructed from premium, marine-grade materials and is IPX4 waterproof, making it completely washdown-ready.Flip Pro is FAST!  It will charge at up 36W on a 12V system or up to 60W on a 24V system.  This makes it perfect for charging modern laptops via the USB-C port.  It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time. *Cables sold separately  Features: Universal fit for any USB-A or USB-C connectors. Waterproof Charging - Tested and approved IPX4 waterproof rating. Marine Ready - Designed for use in all marine environments, whatever the conditions.  Anti-corrosion coating on circuit board combines with a UV resistant shell and 316 stainless hinges and spring. Great Design - Low profile and small mounting footprint. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Technical Specifications: Input voltage - 10-30V DC (12/24V System) Input current Max - 6A (10A fuse recommended)  USB - C Output - 60W (24V) and 36W (12V) USB - A Output - 36W Mounting hole - 1-1/8" (29mm) IPX4 Waterproof Protection - UV Resistant In the Box: USB socket charger Instruction manual *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 2"H x 2"W x 3"L WT: 0.2 lbs UPC: 5060114797956 Quick Guide (pdf)Brochure (pdf)

Read more less

Interface MK3-USB (VE. BUS to USB) ModuleThe MK3-USB allows the following products to connect to a computer for configuration and firmware updates:Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication portWarranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

MasterBus Cable - 6MSuitable for data traffic and powering peripheral equipment in harsh environments, this is the only cable you need for your MasterBus network. MasterBus compatible products come standard with two ports, while other equipment requires an interface. A DIY kit is optional. Brochure (pdf)

Read more less

Piezo Buzzer, 42mm 5-20V 97DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a loud single tone alarm is required. 97 decibel output at 9 Volts Frequency 2.8 KHz Voltage 5-20 Volts (Suitable for use with 701-MDCZ battery switch) on 24 volt systems) Power consumption 12mA at 12 Volts WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

AC Universal Plug Holder - WhiteFeatures: White AC Universal Plug Holder is designed for all standard 120V AC plugs Plug clamp insert included - converts plug holder to an AC inlet for battery chargers No cutting, stripping, or rewiring of AC power cord Watertight and UV resistant cover Stainless steel mounting screws included Easy to reach safe AC power cord connections

Read more less

4368 Water Resistant USB Accessory Panel - 12V Socket, 2x 2.1A Dual USB Chargers, Mini VoltmeterEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness.  Panels offer customizable 12V charging and monitoring options.Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

Read more less

1811Features: Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800-can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Sea Systems Vessel Systems Monitor VSM 422 only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

ERC-12-15 Emergency RelayThe Emergency Relay/Charger is a device for assuring immediate backup power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition, it will allow the power supply to act as a “trickle” battery charger without any additional modification.When loss of DC voltage is sensed by the ERC, it employs a fast-acting S.P.D.T. relay to automatically switch the equipment’s DC input over to a standby battery to allow continued operation. When the power supply is returned to service, the ERC disengages the battery and puts the supply back online to provide DC voltage. While the power supply is operating normally, a small portion of the output current is directed to the battery to trickle-charge and maintain it at full voltage. (Note: Battery float voltage will be maintained at .7 volts lower than the power supply voltage.)Note: If the power supply is down for an extended period, the backup battery may become significantly discharged while powering the radio. When the supply returns to service, the trickle charge rate of the ERC may be insufficient to restore the battery to full charge in a timely manner. In the event this occurs, a supplemental charger may be necessary to bring the battery to full charge.InstallationSelect a suitable location as close to the battery as possible where there is no likelihood of accidental contact and shorting of the terminals. The ERC may be mounted vertically, horizontally, or even upside-down, if necessary, without affecting its operation. Two # 10 sheet metal or wood screws will be needed. Mounting on a metal surface is acceptable as the inputs and outputs are isolated from the mounting bracket.Note: If the battery is stored in an unventilated enclosure, it is not recommended that users mount the ERC within the same enclosure. As with any relay, it should not be in an area where there may possibly be battery gases or any other potentially explosive gases present.WiringThe wiring should be as direct as possible. Ensure that the battery posts are free from corrosion. Determine the correct gauge wire using the information below. The wire length is the total length of the run (ERC-to-Radio + Power Supply-to-ERC) or (ERC-to-Radio + Battery-to-ERC), whichever is longer. 5 ft. wire length = #14 AWG 10 ft. wire length = #12 AWG 15 ft. wire length = #10 AWG 20 ft. wire length = #10 AWG Use the provided crimp ring lug connectors to secure wiring to the ERC. Models ERC-12-15 and ERC-24-15 are provided with yellow plastic terminal covers, which must be reinstalled after wiring to prevent accidental shorting.Specifications: Input Range: 10.0-14.5 VDC (12V) Relay Rating: 10 amps continuous & 15 amps intermittent Float Trickle (typical): 0.1 amps Dimensions (inches): 5-1/8" x 2-7/8" x 2-3/8" Weight: 0.5 lbs. Owner's Manual (pdf)

Read more less

12V Power Socket & CapStamped Brass/Injection Molded Nylon & ABS. Power Socket with Plug easily adds 12V power almost anywhere. Constructed of injection molded nylon and ABS socket with stamped brass plug contacts. Installs with two #8 FH fasteners (not included). Maximum: 12VDC, 16A. Cap and plug may be included or sold separately. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Battery Switch 275A 12-48VDC Surface or Panel MountThe Battery Switch ON/OFF 275A is suitable for battery systems up to 48V. It has a unique ergonomic and aesthetic knob design. The knob is removable for isolation or safety purposes.The Battery Switch can be either surface or panel mounted, providing flexibility during install.The Battery Switch meets the ISO8846 Ignition Protection standard and is suitable for use in an engine room.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

Marine 12-Volt Power Outlet Marine quality 12-volt outlet Designed to for replacing or adding outlets in your boat RV or camper Surface mount WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SeaLink® Deluxe Dual USB Charger & 12V Receptacle 12VDC input Dual USB has 5V, 2.1 amp total output LED power indicator light for USB Receptacle has 12VDC output, rated up to 20 amps Water resistant covers protects against dust and water Insulated terminals included WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less