Electrical - Busbars, Connectors & Insulators

3/8" Power Post - RedA rugged single power post with a 3/8” stud, built for high-current cable termination. It’s perfect for distributing power from batteries, breakers, or busbars in demanding environments. This 3/8 power post features corrosion-resistant materials to ensure long-lasting durability even in harsh marine and industrial settings.Easy to install and designed to handle heavy electrical loads, the power post provides reliable connectivity for critical power distribution in compact spaces. Ideal for boat wiring, off-road vehicles, and other high-vibration applications where strength and security matter. Brochure (pdf)

Read more less

VPNB2 MANL 2 Position All-In-One Distribution Block with CoverT-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse.  This hefty little block distributes power from one (1) 1/0-gauge positive power cable to two (2) 4- to 8-gauge power leads, each routed through a mini-ANL fuse. Then, the same block receives the amps' two ground wires and combines them for a single 1/0-gauge ground cable.Fuses sold separately. Features: (2 positive) 1/0 to 4 AWG in to (2 positives) 4/8 AWG out (1 negative) 1/0 to 4 AWG in to (2 negatives) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: Distribution block for both power and ground Plastic cover (attached) 2 Rubber grommets and sleeves on power inputs (installed) 2 Rubber grommets and sleeves on power outputs (installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

VFDB4 MANL 4 Position Distribution Block with CoverThis compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused.   T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools.   Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.  Fuses sold separately. Features: One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out TPE wrapped soft touch Dual sizes gasket set Water-resistant Solid brass construction Black nickel finish T20 Torx® screws Gate Lock technology In the Box: One distribution block for mini-ANL fuses with one (1)  4 or 1/0 AWG set-screw input and four (4) 4/8 AWG set-screw outputs Plastic cover (attached) 3 Rubber grommets and sleeves (pre-installed) *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

PowerBar 1000 - 8 5/16" Terminal Studs w/CoverComplex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks.Features: 1,000 Amp busbar for large complex wiring systems Tin plated pure electrical copper for maximum conductivity Stepped bus design offers two elevations for conductors which doubles the density of the wire loom compared to traditional bus bars Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables One-piece serrated flange nuts ensure correct and secure connections Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires Busbar may be cut to a shorter length to accommodate constricted spaces Bi-directional busbar end caps allow the ganging of additional busbars Snap on insulating cover meets ABYC and USCG requirements and includes label recess Specs: Number of Terminal Studs: 8 Continuous Rating: 1000A Bus Material: Tin-Plated Copper C11000 Mounting Holes: Accepts #10 (M5) Screws Terminal Stud Size: 5/16 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

4011 CableCap - Black 0.70 to 0.30 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2003 PowerPost High Amperage Cable Connector 3/8" StudInsulated single stainless steel stud terminates multiple large conductors.Features: Connects high amperage cables securely Stud dimensions: 3/8" x 7/8" Base Material is PBT UL94 V0 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

9217 Terminal Block Jumpers for 2500 Series Blocks - Package of 5Features: Jumpers allow creation of common circuits on independent connectors Fits 30 Ampere terminal blocks (2500 Series) Bus Material: Nicke-Plated Brass WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2723 DualBus Plus 5/16" Stud - 5 x 10 - 32 Screw TerminalFeatures: Combines negative and positive buses on one block Clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation requirements WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2602 Terminal Block 65AMP - 2 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

XD Relay Cross-Over Bus BarThe XD Relay Cross-Over Bus Bar allows users to link together Egis XD Single, Dual, and Triple XD Relays to each other in multiple configurations and even to the Egis 8700 Mechanical Disconnect.  Linking relays together creates compact installations and allows for robust circuit switching and battery management.Features: Tin-plated copper ensures reliable circuit connectivity and anti-corrosive features keep it last long term. Robust Protective Insulation ensures no accidental contact shorts between XD relays. Specifications: Continuous Current (Amps): 500 Max Voltage (VDC): 72 Material: Tin-plated copper Size (L x W): 90 x 47mm Thickness: 2.8mm (1/8") Terminal Stud Hole Size: 10.5mm (3/8”) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bus Bar - 6 Way/100A with 2 Input Studs (with Red and Black)BEP bus bars include tin-plated, brass-insulated mounting bases and flame-resistant flexible plastic covers. The covers are color-coded for polarity and feature a unique push-on fit. Bus Type: Single Output screws: 6 Input studs: 2 Rating (A): 100 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current Rating: 100Amps.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less