Electrical - Meters & Monitoring

Micro Ammeter Simple 2-wire connection Meter senses and powers from coil slipped over wire to be measured Includes AC current transformer Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

DC Analog Micro Voltmeter Simple 2-wire connection Meter Senses Powers from same connection Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SmartShunt N2K 350AMP 12-48VDC for SG200 DisplayAdd a SmartShunt for Additional Bank and N2k Connectivity: Includes SmartShunt and N2k Adapter. Does NOT include SmartLink Cable*Works with the SG200 display and or Bluetooth Gateway sold separately. One is needed for Programming.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

DC Digital Ammeter Displays amperage from -500 to +500 Amps 3 levels of display brightness Splashproof front Manual sleep mode blanks display for power conservation Standard meter operates in negative side of circuit only. Shunt Shifter required for positive side installation such as alternators Includes 500 Amp shunt Applicable for 12, 24, 32, 36, and 42 Volt DC systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

DC Digital Voltmeter w/ Alarm Displays voltage from 0 to 60 Volts High and low voltage audio and visual alarms 3 levels of display brightness Programmable sleep mode blanks display for power conservation Splashproof front Applicable for 12, 24, 32, 36, and 42 Volt DC systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

AC Digital Ammeter Displays amperage from 0 to 150 Amps 3 levels of display brightness Splashproof front Includes current transformer Manual sleep mode blanks display for power conservation WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

TRUEcharge3 Remote PanelAdvanced Remote for Monitoring and Full Control of Battery Charger PerformanceThis full-function remote allows you to monitor and control battery charger performance from a remote location, including features not accessible from the charger’s onboard display. The Remote Panel reads like a fuel gauge and displays critical information on the charging of battery banks. It is very easy to install, read, and operate, connecting with the battery charger through the included telephone cable. The TRUECharge3 Remote Panel is designed for use with TRUECharge3 Battery Chargers.Compatible with: TRUEcharge3 12V (20/40/60A) and TRUEcharge3 24V (10/20/30A)Features: Full function compatibility with TRUEcharge3 battery chargers Provides additional features inaccessible via the charger’s onboard display Allows charger to be powered on or placed on standby while AC power is connected Adjust maximum charger output current Displays individual battery bank status Connects two TRUEcharge3 chargers in parallel for up to 2x the output current FCC Class B compliant

Read more less

9228Analog Meter Shunt 50A/50mV For use with DC Ammeters For continuous operation, it is recommended that shunts not be run at more than two-thirds (66%) the rated current under normal conditions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8013 Mounting Panel for (1) 2-3/4" MeterSurface Mounts for Blue Sea Systems 2-3/4" Analog or Digital Meters.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

9630AC Analog Ammeter - 2-3/4" Face, 0-50 Amperes AC Simple 2-wire connection Meter senses and powers from coil slipped over wire to be measured Includes AC current transformer Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

DC Shunt For use with DC Ammeters For continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Energy Meter VM-3P75CT Single + 3-PhaseThe Victron VM-3P75CT energy meter is a standard device to measure the power and energy of single- and three-phase applications and calculates each phase's power values and broadcasts this over VE.Can or Ethernet with a high rate.  It has built-in Ethernet and VE.Can ports for connecting to a GX device and the split-core current transformers enable easy and quick installation without modifying existing wiring.The energy meter works out of the box (the firmware may need to be updated; details can be found in the Firmware Updates chapter) as a grid meter for systems with a MultiPlus and Quattro. Configuration (via VictronConnect) is only required for changing the role and manual IP configuration rather than the default DHCP.  Its data is displayed on a GX device such as the Cerbo GX or Ekrano GX, as well as in VictronConnect and the VRM Portal.Specifications: Voltage connection: Direct Input voltage range L-N: 85 to 265VAC Input voltage range L-L;150 to 460VAC Frequency: 50/60Hz Current connection: Via current transformers (included - wire length 640mm (25.2in) Rated current: 75A VE.Can communication port: Two RJ45 connectors (VE.Can terminators included) Ethernet communication port: One RJ45 connector, Modbus UDP Refresh rate: 100ms Type: Self-power supply via L1-N Switch or circuit breaker: Required as means of a disconnecting device - not included External fuse [1]: Required in the neutral conductor - 500mA, not included Consumption: 1.45W / 3.1VA Frequency: 50/60Hz Material & Color: Polycarbonate, blue (RAL5012) Voltage connection: Screw terminals 0.25 - 1.5mm2 (24 - 16AWG) Current transformer connection: Pluggable screw terminals (included) Protection category: IP20 Weight: 370g (including packaging) Dimensions: 90 x 71 x 59mm (3.5 x 2.8 x 2.3in) Indoor/outdoor usage: Indoor only Operating temperature: From -10 to +55 °C Storage temperature: From -20 to +70 °C Relative humidity: < 90% non-condensing Altitude: 2000m (6562ft) Mains supply voltage fluctuations: ±0.1Vin Overvoltage category: Cat. III Pollution degree: 2 What's In The Box? Victron VM-3P75CT with 3 input terminal blocks 3x Split-core current transformer, wired ready for connection Wire length: 640mm (25.3") VE.Can terminators (2-pieces) Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less