Electrical - Switches & Accessories

1331 AC Insulating Cover for 1 ModuleFeatures: Isolation of 360 panel AC components and circuits from DC system elements Meets ABYC safety requirements for panels with combined AC and DC loads Provides mechanical protection for panel backs protruding into lockers Modular design consists of three different interlocking components - SIDE, TOP, and END Interlocking companion pieces SIDE, TOP, and END can be stacked to accommodate large AC components Cover breakouts allow wire access in any direction WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8172LED Indicator LightGreen12/24V DC5 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Green Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 632085081720

Read more less

Heavy-Duty Toggle Switch SPST Off-(On) 2 ScrewFeatures: Up: Momentary On, Down: Off Two screw terminals For universal application Silver contacts Specifications: Action: (On)/Off Color: Chrome Throw/Pole: SPST Box Dimensions: 2"H x 4"W x 5"L WT: 0.5 lbs UPC: 632850327602

Read more less

Push Pull Switch SPST Off-On 2 ScrewPush Pull, SPST Normally Off, screw terminals, brass case Specifications: Action: On/Off Color: Chrome Plated Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 7"L WT: 0.2 lbs UPC: 632850502603

Read more less

DPDT Contura Switch - 2-Amber LEDs - ON/OFF/ONDouble pole, double throw switch turns two of four circuits on at a time. Common applications combining nav lights and anchor light with independent bulbs, maintained single windshield wiper control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC 1/4" blade terminals Includes two Amber LEDs Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58332-26 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPDT Color: Black Action: On/Off/On Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046471

Read more less

Sealed Rocker Switch Non-Illuminated SPDT On-Off-On 3 BladeFeatures: 25A at 12V DC, 15A at 24V DC Sealed to IP66 for water resistance (high pressure wash.) Single Pole, Double Throw Three brass blade terminals Specifications: Action: On/Off Color: Black Throw/Pole: SPDT Box Dimensions: 2"H x 4"W x 6"L WT: 0.1 lbs UPC: 632850354059

Read more less

4111 360 Panel Adapter for Push Button Reset OnlyFeatures:Adapts Push Button Reset-Only Thermal Circuit Breaker to Blue Sea Systems' rocker panels and new battery management panelsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Double Paddle Trim SystemDouble paddle kit including two paddles and the brackets to attach it to a tilt or to a front mount helm.For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel. Available both in single and dual versions (for either two equal or two different outputs) Both single or dual paddle can be positioned at various angles for the most confortable choice Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version) Max load 5 Amp @ 12VDC For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay Uflex® trim tabs require the use of the KTR - 42860S kit relay Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”) Easy to install on the following Ultraflex® steering systems: - front and tilt mount hydraulic helms- tilt mount mechanical helmsWiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately

Read more less

Water Resistant Contura Switch - Black PN: 8292 Pole: Single Throw: Single Action ( ) = momentary: OFF - (ON) Embedded LEDs: - Features: Vibration, shock, thermoshock, moisture and salt spray resistant Specially manufactured for mounting in Blue Sea Systems' water resistant panels Ignition Protected - Safe for installation aboard gasoline powered boats Meets UL1500 and ISO8846 ignition protection requirements Specifications   Rating: 12 Volts DC 20 Amperes  Rating: 24 Volts DC 15 Amperes Lighted LED rated 100,000 hours 1/2 life Seals Internal and external gasket panel seal Temperature Rating -40°C to 85°C Mounting Hole 1.45" x 0.83" LED Amperage 18 Milliamperes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SR- Series Flange Mount - 300A Battery SwitchStainless steel hardware and tin-plated copper studs. Can be installed in locations with limited space behind the panel.Features: Isolates the batteries and eliminates battery drain when the vehicle is stored overnight or for longer periods. Electrically cuts off battery power for safety or when the vehicle is being serviced. Ignition protected to SAE J1171 and ISO 8846 for installation in a battery box or on vehicles carrying hazardous loads. Available with integral holes to accept lockout/tagout. No need to purchase additional hardware. Plastic construction will not corrode and stands up to road splash and salt spray. Ingress protected to IP67/ IP69K. The switch can be mounted anywhere on the vehicle. Units have a depth of only 3” (knob front to the end of studs) – can be installed in locations where behind-panel space is limited. Stainless steel hardware and tin-plated copper contacts minimize resistance in harsh environments. Specifications: Current Rating (Continuous) in Amps: 300 Voltage Rating (Max): 32 Circuitry: SPST Ingress Protection: IP67, IP69K Actuator: Plastic Knob Contact Material: Copper Housing: Engineering Thermoplastic Agency Approval - Humidity: 0 - 95% RH Agency Approval - Shock: 50 G Agency Approval - Vibration: 10 G Quick Guide (pdf)

Read more less

4-Position Sealed Nylon Ignition Switch - Accessory/OFF/Ignition & Accessory/StartSealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches.Features: Nominal voltage is 12V/24V DC Rated for 10A at 12V DC, 5A at 24V DC Fits panels up to 3/8" thick Same as Cole Hersee part number 95060-50 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gen II Spray Proof Switch Panel 2 Switches No FuseThe contour generation II spray-proof range offers unique styling using the latest techniques in injection molding. The switch tray is molded plastic with a rubber gasket and seal molded into the plastic. The cover is molded in a clear plastic with a rubber over mold allowing the flexibility to operate the switches through the front of the panel while providing a clear window for label backlighting. The contour wave strip is interchangeable allowing for custom colors for OEM applications.BEP Battery Management & Power DistributionBEP offers a range of high-quality electrical solutions (Battery Management and Power Distribution) designed for the harsh Marine, Emergency Vehicle, Industrial and RV environments. Every product meets exacting performance specifications and is designed to withstand extreme conditions, both at sea, and on land.

Read more less