Single Paddle Trim SystemSingle paddle kit including one paddle and the brackets to attach to a tilt or to a front mount helm.For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel.
Available both in single and dual versions (for either two equal or two different outputs)
Both single or dual paddle can be positioned at various angles for the most confortable choice
Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version)
Max load 5 Amp @ 12VDC
For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay
Uflex® trim tabs require the use of the KTR - 42860S kit relay
Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”)
Easy to install on the following Ultraflex® steering systems:
- front and tilt mount hydraulic helms- tilt mount mechanical helmsWiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately
DeckHand Dimmer - 12 Amp/12V
Works with all incandescent and non-regulated LED lamps
Memory for last setting
Illuminated exit with adjustable time delay
Provides continuous voltage control from 0 to 100% of input voltage
Offset mounting tabs allow dimmers to be mounted close together
Retail package includes momentary (ON)-OFF-(ON) switch
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Black
Box Dimensions: 2"H x 4"W x 8"L WT: 0.65 lbs
UPC: 632085075071
Quick Guide (pdf)Owner's Manual (pdf)
8066 Red LED Indicator Light Features:
Red
120V AC
0.5 Millamperes
Easily installed in any Blue Sea Systems circuit breaker panel
Simple push-in installation mounts in any thickness material
Useful as general indicator and alarm lights
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red
Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs
UPC: 632085080662
4181 Backlit Push Button Switch OFF/(ON) - 15AFeatures:
Backlit button is blue when OFF and red when ON
Five ICON labels included: Accessory, Lights, Anchor Light, Running Light, and Bilge Pump
Additional 50 ICON label kit sold separately
Specifications:
Action: OFF-(ON)
Amperage: 15A @ 12V DC
Nominal Voltage: 12V DC
Maximum Voltage: 15V DC
Maximum LED Operating Current: 20mA
Switching Cycles: 10,000
Temperature Range: -20°C to 55°C
Termination: 3" - Bare Wire Pigtail
Wire Size: Black & Blue Wires 18 AWG / Red & Red/White Wires 14AWG
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Stainless
Action: (ON)-OFF
Box Dimensions: 2"H x 3"W x 9"L WT: 0.15 lbs
UPC: 632085041816
Plastic Motion Sensor Switch with Delay for LED LightsMotion Sensor Switch can be used to activate LED and incandescent lights. The motion detection range is up to 15 feet, with an activation angle of 120°. Activation time is adjustable (10/20/50/70 seconds); factory preset 70 seconds. 2A max. 12-30VDC. IP67 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
22mm Push Button Switch - Off/(On) Momentary Contact - Blue/Red LED - 4' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has an “Off/(On)" momentary contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:4 ft. leadSpecifications:
Function: Off-(On) (momentary contact)
Off/On: Blue/red
Rear Mark Page: Green dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
InstallationDrill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: (ON)-OFF
Color: Blue/Red
Box Dimensions: 0"H x 0"W x 0"L WT: 0.41 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Off/On/On Contact - Blue/Green/Red LED - 4' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has an “Off-On-On" standard contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:4 ft. leadSpecifications:
Function: Off-On-On (standard contact)
Off/1st On: Blue/Green
2nd On: Red
Rear Mark Page: Blue dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
InstallationDrill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: ON-ON-OFF
Color: Blue/Green/Red
Box Dimensions: 0"H x 0"W x 0"L WT: 0.46 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Off/(On)/(On) Double Momentary Contact - Blue/Green/Red LED - 4' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has an “Off-(On)-(On)" double momentary contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:4 ft. leadSpecifications:
Function: Off-(On)-(On) (double momentary contact)
Off/1st On: Blue/Green
2nd On: Red
Rear Mark Page: Green dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
InstallationDrill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: (ON)-(ON)-OFF
Color: Blue/Green/Red
Box Dimensions: 0"H x 0"W x 0"L WT: 0.46 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Nav/Anc Contact - Blue/Green/Red LED - 4' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has a “Nav/Anc" contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:4 ft. leadSpecifications:
Function: Nav/Anc
Off/1st On: Blue/Green
2nd On: Red
Rear Mark Page: White dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
InstallationDrill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: ON-ON-OFF
Color: Blue/Green/Red
Box Dimensions: 0"H x 0"W x 0"L WT: 0.46 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Off/(On) Momentary Contact - Blue/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has an “Off/(On)" momentary contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:1 ft. leadSpecifications:
Function: Off-(On) (momentary contact)
Off/On: Blue/red
Rear Mark Page: Green dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
Installation:Drill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: (ON)-OFF
Color: Blue/Red
Box Dimensions: 0"H x 0"W x 0"L WT: 0.21 lbs
Quick Guide (pdf)Brochure (pdf)
22mm Push Button Switch - Off/(On)/(On) Double Momentary Contact - Blue/Green/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has an “Off-(On)-(On)" double momentary contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:1 ft. leadSpecifications:
Function: Off-(On)-(On) (double momentary contact)
Off/1st On: Blue/Green
2nd On: Red
Rear Mark Page: Green dot
Switch Rating: 20A/12 – 24VDC
Material: Stainless steel
Mechanical Life: 50,000 cycles
Electrical Life: 10,000 cycles
Installation:Drill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications:
Action: (ON)-(ON)-OFF
Color: Blue/Green/Red
Box Dimensions: 0"H x 0"W x 0"L WT: 0.21 lbs
Quick Guide (pdf)Brochure (pdf)