Electrical - Terminals

22-18 AWG Heat Shrink Ring Terminal - #10 Stud Size - 25 PackRing terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Red Wire AWG: 22-18 AWG Stud Size: #10 Terminal Pad Width (inch): 0.32” Package Size: Twenty-five included Specifications: Gauge: 22-18 AWG Heat Shrink: Yes Package Qty: 25 Post Size: #10 Type: Ring Terminals Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248206372

Read more less

16-14 AWG Heat Shrink Female Bullet Terminal - 100 PackDisconnects are a type of terminal intended to be disconnected and reconnected multiple times. This makes them ideal for use where field serviceability is an issue. Disconnects are a great way to protect electrical connections. Whether dealing with mechanical abuse, wire pull-out, or abrasion, they are a solid choice for longevity. Disconnects are sometimes known as quick connects or slip-on connectors.Features: Female bullet terminal Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Disconnect & reconnectable Creates solid connections Meets multiple compliances Benefits: Environmentally sealed  Built for durability Tinned Copper  Long Lasting Easy to install Characteristics: Insulation Color: Blue Wire AWG: 16-14 AWG Package Size: One-hundred included Bullet Terminal Size (inch): 0.156" Shrink Ratio: Approximately 3:1 at 135 °C Operating Temperature: -55 °C - 125 °C Volume Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: Gauge: 16-14 AWG Heat Shrink: Yes Package Qty: 100 Type: Disconnects Box Dimensions: 2"H x 3"W x 7"L WT: 0.4 lbs UPC: 840248207140 Quick Guide (pdf)

Read more less

16-14 AWG Heat Shrink Ring Terminal - 1/4" Stud Size - 25 PackRing terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Blue Wire AWG: 16-14 AWG Stud Size (inch): 1/4" Terminal Pad Width (inch): 0.48” Package Size: Twenty-five included Quick Guide (pdf)

Read more less

12-10 AWG Heat Shrink Spade Terminal - #10 Stud Size - 100 PackFork terminals connect wires to a stud, bus bar, or another part of an electrical system. Fork terminals help prevent frayed wires and offer a high level of protection. In an electrical environment, vibration is often a factor. Standard lock terminals will disconnect should the holding screw loosen. Locking fork terminals have a projection inside the forks, causing the terminals to snap onto the screw. Flanged fork terminals have the ends of the forks turned up. These designs will keep the terminal fastened even if the holding screw loosens.Features: High-quality tinned copper for corrosion resistance Efficient installation Creates solid connections Meets multiple compliances Benefits: Environmentally sealed Easy to Install Built for durability Long-lasting Specifications: Color: Yellow Wire AWG: 12-10 AWG Stud Size: #10 Terminal Pad Width (inch): 0.39” Package Size: One-hundred included Specifications: Gauge: 12-10 AWG Heat Shrink: Yes Package Qty: 100 Post Size: #10 Type: Spade connectors Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 840248206518 Quick Guide (pdf)

Read more less

12-10 AWG Heat Shrink Ring Terminal - 3/8" Stud Size - 3 PackRing terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.Features: Tinned copper 600 Volts The operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Yellow Wire AWG: 12-10 AWG Stud Size (inch): 3/8" Terminal Pad Width (inch): 0.60” Package Size: Three included Specifications: Gauge: 12-10 AWG Heat Shrink: Yes Package Qty: 3 Post Size: 3/8" Type: Ring Terminals Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 840248206143 Quick Guide (pdf)

Read more less

16-14 AWG Heat Shrink Spade Terminal - #8 Stud Size - 25 PackFork terminals connect wires to a stud, bus bar, or another part of an electrical system. Fork terminals help prevent frayed wires and offer a high level of protection. In an electrical environment, vibration is often a factor. Standard lock terminals will disconnect should the holding screw loosen. Locking fork terminals have a projection inside the forks, causing the terminals to snap onto the screw. Flanged fork terminals have the ends of the forks turned up. These designs will keep the terminal fastened even if the holding screw loosens.Features: High-quality tinned copper for corrosion resistance Efficient installation Creates solid connections Meets multiple compliances Benefits: Environmentally sealed Easy to Install Built for durability Long-lasting Specifications: Color: Blue Wire AWG: 16-14 AWG Stud Size: #8 Terminal Pad Width (inch): 0.32” Package Size: Twenty-five included Specifications: Gauge: 16-14 AWG Heat Shrink: Yes Package Qty: 25 Post Size: #8 Type: Spade connectors Box Dimensions: 1"H x 2"W x 4"L WT: 0.25 lbs UPC: 840248206556 Quick Guide (pdf)

Read more less

12-10 AWG Heat Shrink Spade Terminal - #8 Stud Size - 3 PackFork terminals connect wires to a stud, bus bar, or another part of an electrical system. Fork terminals help prevent frayed wires and offer a high level of protection. In an electrical environment, vibration is often a factor. Standard lock terminals will disconnect should the holding screw loosen. Locking fork terminals have a projection inside the forks, causing the terminals to snap onto the screw. Flanged fork terminals have the ends of the forks turned up. These designs will keep the terminal fastened even if the holding screw loosens.Features: High-quality tinned copper for corrosion resistance Efficient installation Creates solid connections Meets multiple compliances Benefits: Environmentally sealed Easy to Install Built for durability Long-lasting Specifications: Color: Yellow Wire AWG: 12-10 AWG Stud Size: #8 Terminal Pad Width (inch): 0.39” Package Size: Three included Quick Guide (pdf)

Read more less

12-10 AWG Heat Shrink Spade Terminal - #10 Stud Size - 25 PackFork terminals connect wires to a stud, bus bar, or another part of an electrical system. Fork terminals help prevent frayed wires and offer a high level of protection. In an electrical environment, vibration is often a factor. Standard lock terminals will disconnect should the holding screw loosen. Locking fork terminals have a projection inside the forks, causing the terminals to snap onto the screw. Flanged fork terminals have the ends of the forks turned up. These designs will keep the terminal fastened even if the holding screw loosens.Features: High-quality tinned copper for corrosion resistance Efficient installation Creates solid connections Meets multiple compliances Benefits: Environmentally sealed Easy to Install Built for durability Long-lasting Specifications: Color: Yellow Wire AWG: 12-10 AWG Stud Size: #10 Terminal Pad Width (inch): 0.39” Package Size: Twenty-five included Specifications: Gauge: 12-10 AWG Heat Shrink: Yes Package Qty: 25 Post Size: #10 Type: Spade connectors Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248206525 Quick Guide (pdf)

Read more less

8 AWG Heat Shrink Butt Connector - 25 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #8 AWG Insulation Color: Pink Max Wire Insulation Outer Diameter (inch): 0.35" Package Size: Twenty-five Specifications: Heat Shrink: Yes Package Qty: 25 Post Size: #8 Type: Butt Connectors Box Dimensions: 2"H x 3"W x 5"L WT: 0.35 lbs UPC: 840248206679 Quick Guide (pdf)

Read more less

12-10 AWG Heat Shrink Spade Terminal - #8 Stud Size - 25 PackFork terminals connect wires to a stud, bus bar, or another part of an electrical system. Fork terminals help prevent frayed wires and offer a high level of protection. In an electrical environment, vibration is often a factor. Standard lock terminals will disconnect should the holding screw loosen. Locking fork terminals have a projection inside the forks, causing the terminals to snap onto the screw. Flanged fork terminals have the ends of the forks turned up. These designs will keep the terminal fastened even if the holding screw loosens.Features: High-quality tinned copper for corrosion resistance Efficient installation Creates solid connections Meets multiple compliances Benefits: Environmentally sealed Easy to Install Built for durability Long-lasting Specifications: Color: Yellow Wire AWG: 12-10 AWG Stud Size: #8 Terminal Pad Width (inch): 0.39” Package Size: Twenty-five included Specifications: Gauge: 12-10 AWG Heat Shrink: Yes Package Qty: 25 Post Size: #8 Type: Spade connectors Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248206495 Quick Guide (pdf)

Read more less

12-10 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 100 PackRing terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.Features: Tinned copper 600 Volts The operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Yellow Wire AWG: 12-10 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.54” Package Size: One-hundred included Specifications: Gauge: 12-10 AWG Heat Shrink: Yes Package Qty: 100 Post Size: 5/16" Type: Ring Terminals Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 840248206150 Quick Guide (pdf)

Read more less

16-14 AWG Heat Shrink Female Disconnect - 100 PackDisconnects are a type of terminal intended to be disconnected and reconnected multiple times. This makes them ideal for use where field serviceability is an issue. Disconnects are a great way to protect electrical connections. Whether dealing with mechanical abuse, wire pull-out, or abrasion, they are a solid choice for longevity. Disconnects are sometimes known as quick connects or slip-on connectors.Features: Fully insulated Female disconnect Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Disconnect & reconnectable Creates solid connections Meets multiple compliances Benefits: Environmentally sealed  Built for durability Tinned Copper  Long Lasting Easy to install Characteristics: Insulation Color: Blue Wire AWG: 16-14 AWG Package Size: One-hundred included Disconnect Size (inch): 0.250 Shrink Ratio: Approximately 3:1 at 135 °C Operating Temperature: -55 °C - 125 °C Volume Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: Gauge: 16-14 AWG Heat Shrink: Yes Package Qty: 100 Type: Disconnects Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 840248206969 Quick Guide (pdf)

Read more less