Electrical - Terminals

22-18 AWG Fully-Insulated Male Disconnect Terminal - Red - 25 PackCreating a solid connection is important in every part of an electrical system. Being able to disconnect and reconnect makes maintenance that much easier. With Pacer's heat-shrink fully insulated disconnect terminals, users get the best of both worlds. Heat shrink terminals protect against the elements in the most challenging of environments. They offer the best moisture protection available. How do they do this? This heat-shrink fully insulated disconnect terminals have a built-in heat-activated adhesive liner.This liner provides a rugged, environmentally sealed connection for wires from 22 AWG - 10 AWG. No longer will users need to worry about exposure to water, oil, gas, or other corrosive compounds. These terminals even protect connections from physical abuse and abrasion. Disconnects allow the user to easily separate the connection if needed. This makes removing a piece of equipment or completing field service maintenance a breeze. The insulation color indicates the wire gauge the terminal should be used on. Red insulation is for 22-18 AWG. Blue insulation is for 16-14 AWG. Yellow insulation is for 12-10 AWG. Selecting the correct heat shrink fully insulated disconnect terminal isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Provides strain relief Characteristics: Shrink Ratio: Approx. 3:1 at 135 °C Operating Temp: -55 °C - 125 °C Vol. Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: AWG: 22-18 Disc./Bullet Size: 0.250 in. Insulation Color: Red Package Size: 25 Compliances: UL CSA RoHS Specifications: Gauge: 22-18 AWG Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 840248207652 Brochure (pdf)

Read more less

22-18 Male Heatshrink Disconnect - 100-PackFeatures: ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire Range: 22-18/.250 Size: 0.3-0.8mm/6.4mm Gender: Male Qty/Pkg: 100WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Package Qty: 100 Heat Shrink: Yes Type: Disconnects Box Dimensions: 2"H x 3"W x 4"L WT: 0.23 lbs UPC: 091887318616 Quick Guide (pdf)Brochure (pdf)

Read more less

DTP Deutsch Receptacle Repair Kit - 14-12 AWG (4 Position)DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. Contact a Pacer expert with any questions that you may have.Features: 14-12 AWG applications  25 Amp continuous power Specifications: Number of Cavities (Positions): 4 Contents: (1) 4 pos. receptacle, (1) 4 pos. wedge lock, (4) stamped and formed pins Brochure (pdf)

Read more less

DTP Deutsch Plug Repair Kit - 14-12 AWG (4 Position)DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. Contact a Pacer expert with any questions that you may have.Features: 14-12 AWG applications  25 Amp continuous power Specifications: Number of Cavities (Positions): 4 Contents: (1) 4 pos. plug, (1) 4 pos. wedge lock, (5) stamped and formed contacts Brochure (pdf)

Read more less

DTP Deutsch Plug Repair Kit - 14-12 AWG (2 Position)DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. Contact a Pacer expert with any questions that you may have.Features: 14-12 AWG applications  25 Amp continuous power Specifications: Number of Cavities (Positions): 2 Contents: (1) 2 pos. plug, (1) 2 pos. wedge lock, (3) stamped and formed contacts Brochure (pdf)

Read more less

DTP Deutsch Receptacle Repair Kit - 14-12 AWG (2 Position)DTP Series Deutsch Connectors are the solution for power application requirements. The DTP line was developed to handle the need for higher amperage, multi-pin economical connectors.  Each circuit is capable of continuous 25 amp service.  Deutsch solid contacts (14-12 AWG) are included in the packs. Contact a Pacer expert with any questions that you may have.Features: 14-12 AWG applications  25 Amp continuous power Specifications: Number of Cavities (Positions): 2 Contents: (1) 2 pos. receptacle, (1) 2 pos. wedge lock, (2) stamped and formed pins Brochure (pdf)

Read more less

15A Euro Style Terminal Block - 12 Gang - 5 PackPacer's European terminal blocks are constructed from 6/6 nylon and incorporate tin-plated brass inserts for corrosion resistance. They also carry wire protectors to prevent stranded wire from being damaged during the installation process. This 15A Pacer European terminal block has 14 AWG max.Features: 15 AMP, 300V, 14 AWG max 12 positions Each European terminal block is built to handle the harshest marine conditions Recessed screws and terminals to avoid shock hazards Closed-back design to prevent moisture intrusion Easily cut Compliances: UL Recognized CSA Certified Characteristics: Constructed from 6/6 nylon Tin-plated brass inserts Applications: Distributing voltage and power to smaller circuits Combining grounds in an electrical system Specifications: Package Qty: 5 Box Dimensions: 1"H x 1"W x 4"L WT: 0.05 lbs UPC: 840248215923

Read more less

20A Euro Style Terminal Block - 12 Gang - 5 PackPacer's European terminal blocks are constructed from 6/6 nylon and incorporate tin-plated brass inserts for corrosion resistance. They also carry wire protectors to prevent stranded wire from being damaged during the installation process. This 20A Pacer European terminal block has 12 AWG max.Features: 20 AMP, 300V, 12 AWG max 12 positions Each European terminal block is built to handle the harshest marine conditions Recessed screws and terminals to avoid shock hazards Closed-back design to prevent moisture intrusion Easily cut Compliances: UL Recognized CSA Certified Characteristics: Constructed from 6/6 nylon Tin-plated brass inserts Applications: Distributing voltage and power to smaller circuits Combining grounds in an electrical system Specifications: Package Qty: 5 Box Dimensions: 1"H x 1"W x 6"L WT: 0.4 lbs UPC: 840248215947 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 2-PackCable Gauge: 4/0Screw Size: 3/8" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 3/8" Package Qty: 2 Heat Shrink: No Gauge: 4/0 AWG Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 091887259049 Quick Guide (pdf)

Read more less

Tinned Lug 8 AWG - #10 Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 8 Stud Size: #10 Length: 1.187” Width: 0.438” Clearance: 0.344” Package Size: 10 Specifications: Gauge: 8 AWG Heat Shrink: No Package Qty: 10 Post Size: #10 Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.15 lbs UPC: 840248209861 Brochure (pdf)

Read more less

Nylon Fully Insulated Disconnect - Male - 16-14 - 25-PieceAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: 0.250 (6.4 mm) tab size Nylon insulated with insulation grip Double crimp, funnel entry UL 310 Specifications: Gauge: 16-14 AWG Heat Shrink: No Package Qty: 25 Type: Disconnects Box Dimensions: 1"H x 4"W x 6"L WT: 0.09 lbs UPC: 091887214192

Read more less

12-10 Female Heatshrink Disconnects - 25-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.Features: Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength UL listed and CSA recognized WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Disconnects Package Qty: 25 Heat Shrink: Yes Box Dimensions: 1"H x 3"W x 5"L WT: 0.11 lbs UPC: 091887986280

Read more less