Electrical - Terminals

22-18 AWG Heat Shrink Female Bullet Terminal - 25 PackDisconnects are a type of terminal intended to be disconnected and reconnected multiple times. This makes them ideal for use where field serviceability is an issue. Disconnects are a great way to protect electrical connections. Whether dealing with mechanical abuse, wire pull-out, or abrasion, they are a solid choice for longevity. Disconnects are sometimes known as quick connects or slip-on connectors.Features: Female bullet terminal Protects terminations from water, condensation, salt spray, and corrosion Added vibration protection in rugged environments Disconnect & reconnectable Creates solid connections Meets multiple compliances Benefits: Environmentally sealed  Built for durability Tinned Copper  Long Lasting Easy to install Characteristics: Insulation Color: Red Wire AWG: 22-18 AWG Package Size: Twenty-five included Bullet Terminal Size (inch): 0.156" Shrink Ratio: Approximately 3:1 at 135 °C Operating Temperature: -55 °C - 125 °C Volume Resistivity: 1015 Ohm-cm3 Dielectric Strength: 900-V/mil Voltage Rating: 600-V Specifications: Gauge: 22-18 AWG Heat Shrink: Yes Package Qty: 25 Type: Disconnects Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248207270 Quick Guide (pdf)

Read more less

22-18 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 100 PackRing terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Red Wire AWG: 22-18 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.48” Package Size: One-hundred included Specifications: Gauge: 22-18 AWG Heat Shrink: Yes Package Qty: 100 Post Size: 5/16" Type: Ring Terminals Box Dimensions: 1"H x 3"W x 7"L WT: 0.3 lbs UPC: 840248206457 Quick Guide (pdf)

Read more less

Tinned Lug 1/0 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated In-field applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 1/0 AWG Stud Size: 1/2" Length (inch): 1.844" Width (inch): 0.734" Clearance (inch): 0.469" Package Size: Ten included Specifications: Gauge: 1/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 4"L WT: 0.4 lbs UPC: 840248205337 Quick Guide (pdf)

Read more less

Tinned Lug 3/0 AWG - 3/8" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 3/0 AWG Stud Size: 3/8" Length (inch): 2.172" Width (inch): 0.906" Clearance (inch): 0.500" Package Size: Ten included Specifications: Gauge: 3/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 1"H x 4"W x 5"L WT: 0.6 lbs UPC: 840248205672 Quick Guide (pdf)

Read more less

16-14 AWG Heat Shrink Butt Connector - 3 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #16-14 AWG Insulation Color: Blue Max Wire Insulation Outer Diameter (inch): 0.21" Package Size: Three Specifications: Gauge: 16-14 AWG Heat Shrink: Yes Package Qty: 3 Type: Butt Connectors Box Dimensions: 1"H x 1"W x 4"L WT: 0.1 lbs UPC: 840248206747 Quick Guide (pdf)

Read more less

12-10 AWG Heat Shrink Butt Connector - 100 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #12-10 AWG Insulation Color: Yellow Max Wire Insulation Outer Diameter (inch): 0.28" Package Size: One-hundred Specifications: Gauge: 12-10 AWG Heat Shrink: Yes Package Qty: 100 Type: Butt Connectors Box Dimensions: 2"H x 5"W x 9"L WT: 0.8 lbs UPC: 840248206693 Quick Guide (pdf)

Read more less

16-14 AWG Heat Shrink Butt Connector - 25 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #16-14 AWG Insulation Color: Blue Max Wire Insulation Outer Diameter (inch): 0.21" Package Size: Twenty-five Specifications: Gauge: 16-14 AWG Heat Shrink: Yes Package Qty: 25 Type: Butt Connectors Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248206730 Quick Guide (pdf)

Read more less

Tinned Lug 1 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 1 AWG Stud Size: 1/2" Length (inch): 1.719" Width (inch): 0.692" Clearance (inch): 0.469" Package Size: Ten included Specifications: Gauge: 1 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 4"L WT: 0.3 lbs UPC: 840248205412 Quick Guide (pdf)

Read more less

Tinned Lug 4 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 4 AWG Stud Size: 1/2" Length (inch): 1.625" Width (inch): 0.766" Clearance (inch): 0.469" Package Size: Ten included Specifications: Gauge: 4 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 4"L WT: 0.25 lbs UPC: 840248205771 Quick Guide (pdf)

Read more less

Tinned Lug 3/0 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 3/0 AWG Stud Size: 1/2" Length (inch): 2.172" Width (inch): 0.906" Clearance (inch): 0.500" Package Size: Ten included Specifications: Gauge: 3/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 4"L WT: 0.6 lbs UPC: 840248205658 Quick Guide (pdf)

Read more less

Tinned Lug 2 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 2 AWG Stud Size: 1/2" Length (inch): 1.750" Width (inch): 0.766" Clearance (inch): 0.406" Package Size: Ten included Specifications: Gauge: 2 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 6"L WT: 0.3 lbs UPC: 840248205573 Quick Guide (pdf)

Read more less

Tinned Lug 4/0 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 4/0 AWG Stud Size: 1/2" Length (inch): 2.344" Width (inch): 0.984" Clearance (inch): 0.547" Package Size: Ten included Specifications: Gauge: 4/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 7"L WT: 0.85 lbs UPC: 840248205719

Read more less