Electrical - Wire Management

Premium Assorted Electrical Tape - 1/2" x 20' - Black / Red / White / Green / YellowThis quality electrical tape is designed for general purpose electrical applications.Features: Made from low-lead 7-mil PVC material For applications up to 600V Temp rating up to 105°C (220°F) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tape Box Dimensions: 2"H x 4"W x 5"L WT: 0.25 lbs UPC: 091887987096

Read more less

CCX-R Thru-Dex FittingThis waterproof fitting's entry hole is pre-drilled in seal with a slit edge allowing feed through of cable with a factory-installed connector attached. One CCX fitting is required for each cable.Features: Create a 100% waterproof seal when routing cables through decks and bulkheads Entry hole predrilled in seal with a slit to edge Allowing installation or removal with the connector still attached Rugged weatherproof nylon housing with neoprene seal Specifications: Cable Diameter Range (inches): .47-.59 Max Connector Diameter (inches): 1.57 Specifications: Type: Deck Seal Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs

Read more less

Battery Cable Heavy Wall Heat Shrink Tubing - 3/4" x 3" - Black/Red (2-Pieces Combo Pack)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated. When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic. Insulation varies with different types of wires, different diameters or tubing may be required. When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 840248214445 Brochure (pdf)

Read more less

Battery Cable Heavy Wall Heat Shrink Tubing - 1" x 3" - Black/Red (2-Pieces Combo Pack)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Specifications: Expanded Inner Diameter: 1.1" Recovered Inner Diameter: 0.367" Application Range AWG: 1/0 - 4/0 (.40 - .95) Recovered Wall Thickness: 0.12" Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 4"L WT: 0.01 lbs UPC: 840248214391 Brochure (pdf)

Read more less

Battery Cable Heavy Wall Heat Shrink Tubing - 1" x 12" - Red (2-Pieces)BHW is coated internally with a dual-purpose thermoplastic liner which flows and encapsulates when heated.  When cooled, the tubing offers the mechanical strength of a superior adhesive and the corrosion protection of a high-quality mastic.  Insulation varies with different types of wires, different diameters or tubing may be required.  When choosing a size, consider any components or connectors that may need to be covered.Features: Highly abrasion and impact-resistant Easy installation, shrinks when heated over 120 °C The thermoplastic liner will adhere to PVC, neoprene and polyolefin, EPR, steel, and aluminum A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermoplastic adhesive provides superior environmental protection. Any connection in harsh conditions Adhesive lining provides a barrier against contaminants Excellent resistance to acids and alkalis Good resistance to fuel, oil, and solvents Applications: Splice sealing Primary insulation Cable/jacket repair Direct burial/submersible Strain relief Specifications: Expanded Inner Diameter: 1.1" Recovered Inner Diameter: 0.367" Application Range AWG: 1/0 - 4/0 (.40 - .95) Recovered Wall Thickness: 0.12" Compliances:MIL-I-23053/15 Class 2 Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 12"L WT: 0.2 lbs UPC: 840248214377 Brochure (pdf)

Read more less

Marine Grade Electrical Wire Seal - Round Cable - 1 to 3/0 AWG, 3/4" NPTLiquid Tight Wire Seals provide low cost watertight cable entries into panels and junction boxes. UL and CSA approved to work with round cable. Resistant to saltwater, gasoline, alcohol, ketones, and mineral oil. Safe underwater to 300ft. (150 PSIG). Features: Round Cable AWG Range: 1-3/0 Min/Max: .51-.71 Clearance Hole: 1.05 NPT Size": 3/4 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 4"L WT: 0.08 lbs UPC: 091887803983 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 2-1/2" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 2-1/2” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 6"W x 6"L WT: 1 lbs UPC: 840248216340 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 2" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 2” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 5"W x 5"L WT: 1 lbs UPC: 840248216333 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 1-3/4" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 1-3/4” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 4"W x 4"L WT: 0.5 lbs UPC: 840248216326 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 7/8" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 7/8” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 4"W x 4"L WT: 0.5 lbs UPC: 840248216289 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 3/4" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 3/4” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 4"W x 4"L WT: 0.5 lbs UPC: 840248216272 Brochure (pdf)

Read more less

Stainless Steel C-Clamp with Neoprene Cushion - 1/4" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features: 1/4" mounting hole 1/2" width for strength Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances: 304/321 Stainless Steel meets MIL-S-5059 AMS5510 General purpose EPDM per SAE J200BC715 Specifications: Diameter When Closed: 1/4” Package Size: 10 Cable Clamp Color: Stainless steel with black neoprene cushion Specifications: Type: Cusion Clamps Box Dimensions: 1"H x 3"W x 3"L WT: 0.3 lbs UPC: 840248216234

Read more less