Self-Extinguishing Split Loom 3/8" x 10'Features:
Permits flexible routing of cable harnesses
Provides abrasion protection for wire and cable
Allows lead-outs at any point for the greatest ease of installation
Split loom temperature range is -40°F to 275°F / -40°C to 135°C
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Misc
Box Dimensions: 2"H x 5"W x 7"L WT: 0.13 lbs
UPC: 091887967470
Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 6" - 10-Pack - RedPackage of 10 Red 6"(15.2cm) long sections with a 1/4"(6.4mm) diameter that shrinks to 5/64"(2mm)Wire Range: 16-10 AWGFeatures:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 1"H x 3"W x 8"L WT: 0.06 lbs
UPC: 091887973907
DS-MULTI Cable Seal Plastic - BlackDesigned to provide a quick and easy installation for multiple cables. Supplied with an undrilled seal allowing you to custom-drill holes to match your cable requirements. Designed for multiple cables up to Ø15mm (0.59"), DS-MULTI-P-BLK is perfect for solar panels, lights, and other rooftop electronics. Constructed from high-impact plastic, DS-MULTI-P-BLK is UV- stable and hard-wearing providing a 100% watertight seal no matter the weather. Features:
IP68 Waterproof
Designed to fit multiple cables up to 15mm (0.59") in diameter
UV resistant
Supplied with undrilled bungs and made from marine-grade black high-impact plastic
No messy sealant on the bung
Easy-fit cable routing that cuts down your installation time
A guaranteed 100% watertight seal
Designed for a range of cable diameters making it ideal for almost every installation
Perfect for solar panels, light bars, lights, and other rooftop electronics
Specifications:
Type: Deck Seal
Box Dimensions: 1"H x 4"W x 9"L WT: 0.3 lbs
UPC: 5060114798380
Brochure (pdf)
DS-H10-BLK Horizontal Cable Seal- Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables. A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features:
Watertight installation - 100% waterproof with an IPX68 rating
Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.
The low-profile construction is impact resistant and provides extra protection from water.
Technical Specifications:
Fits cable size (diameter) - .24" to .39" (6 - 10 mm)
Height - 1.06" (27 mm)
Width - 1.75" (44.5 mm)
Color - Black
Orientation - Horizontal
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as an Three (3) Pack Specifications:
Type: Deck Seal
Box Dimensions: 2"H x 4"W x 9"L WT: 1.05 lbs
Quick Guide (pdf)Brochure (pdf)
DS21A-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features:
Watertight installation - 100% waterproof with an IP68 rating
Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
No Need to Remove Cable Connectors - split-seal option does not require connector removal during install.
Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield.
Technical Specifications:
Fits cable size (diameter) - .17" to .31" (4 - 9 mm)
Fits connector size up to .83" (21 mm) in diameter
Height - .81" (20.5 mm)
Color - Stainless
Orientation - Vertical
Material - Stainless Steel
In the Box:
Cable seal
Mounting hardware
Installation manual
*Sold as an Individual Specifications:
Type: Deck Seal
Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs
UPC: 5060114792791
Quick Guide (pdf)Brochure (pdf)
Stainless Steel C-Clamp with Neoprene Cushion - 3/8" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features:
1/4" mounting hole
1/2" width for strength
Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances:
304/321 Stainless Steel meets MIL-S-5059 AMS5510
General purpose EPDM per SAE J200BC715
Specifications:
Diameter When Closed: 3/8”
Package Size: 10
Cable Clamp Color: Stainless steel with black neoprene cushion
Specifications:
Type: Cusion Clamps
Box Dimensions: 1"H x 4"W x 4"L WT: 0.3 lbs
UPC: 840248216241
Brochure (pdf)
Stainless Steel C-Clamp with Neoprene Cushion - 1/2" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features:
1/4" mounting hole
1/2" width for strength
Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances:
304/321 Stainless Steel meets MIL-S-5059 AMS5510
General purpose EPDM per SAE J200BC715
Specifications:
Diameter When Closed: 1/2”
Package Size: 10
Cable Clamp Color: Stainless steel with black neoprene cushion
Specifications:
Type: Cusion Clamps
Box Dimensions: 1"H x 3"W x 3"L WT: 0.3 lbs
UPC: 840248216258
Brochure (pdf)
Stainless Steel C-Clamp with Neoprene Cushion - 5/8" - 10 PackStainless steel cable clamps are useful in a wide range of applications where a high degree of protection is required. Each stainless steel cable clamp is composed of 321 stainless steel for the protection of wires or hoses. The cushions it carries also serve to dampen vibrations, adding another layer of protection. The strength and corrosion resistance of stainless steel combined with the protection of the cushion provide a long-term, reliable mounting solution. Have a question about this or any other Pacer product? Contact a Pacer expert today and let them help.Features:
1/4" mounting hole
1/2" width for strength
Applications:Stainless steel clamps are used for mounting wire, cable, or hoses where weight and vibration are a factorCompliances:
304/321 Stainless Steel meets MIL-S-5059 AMS5510
General purpose EPDM per SAE J200BC715
Specifications:
Diameter When Closed: 5/8”
Package Size: 10
Cable Clamp Color: Stainless steel with black neoprene cushion
Specifications:
Type: Cusion Clamps
Box Dimensions: 1"H x 3"W x 4"L WT: 0.3 lbs
UPC: 840248216265
Brochure (pdf)
Heat Shrink Tubing 3/4" x 48" - Yellow - 1 PiecesHeat activated adhesive lining creates a superior water, oil, and acid resistant seal. Most shrink tubing on the market reduces to a 2:1 ratio, Ancor tubing shrinks to 3:1 which allows a wider range of applications for each tubing size. Features:
Diameter: 3/4"
Shrinks To: 1/4"
Color: Yellow
Per Package: 1
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 1"H x 1"W x 48"L WT: 0.15 lbs
UPC: 091887808568
Horizontal Double-Entry Cable Seal - Grey - Multiple Cable CombinationsThe DS-HD10 double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for rooftop lights and electronics. Scanstrut’s seal helps users achieve a sleek, easy-to-fit, and 100% watertight installation every time. Features:
Designed for two cables
IP68 watertight seal
Compact footprint - just 66.5mm (2.61 in.) W / 75.1mm (2.95 in.) L / 28.5 mm (1.12 in.) H
Easy-fit cable routing that cuts down the installation time through wood, metal, and GRP
Grey high-impact plastic
Includes 316 stainless steel fixings and a waterproof 3M gasket
The low-profile construction is impact-resistant and provides extra protection from water
Scanstrut’s materials have been selected to be UV-stable and hard-wearing
No messy sealant on bungs
Install 2 Cables – Select Any Combination:
6mm x 2
7mm x 2
8mm x 2
9mm x 2
10mm x 2
Blank x 2
Specifications:
Type: Deck Seal
Box Dimensions: 1"H x 4"W x 9"L WT: 0.35 lbs
UPC: 5060114799004
DS30-SL Starlink Cable Seal - GreyThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates an 8.5mm (0.34") cable and a connector of Ø30mm (1.18") in diameter.Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a watertight seal, ensuring an IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features:
IP68 waterproof rated
Made from premium marine-grade UV-stable materials
Includes 316 stainless steel fixings and a waterproof 3M gasket
Captive nuts ensure an easy and reliable repeat installation
No messy sealant on bungs
Split bungs for ease of installation
Install connectors up to Ø30mm (1.18") in diameter
Fully customizable with self-drill bung options
2 bungs - 1x blank & 1x 8.5mm (0.34”)
Specifications:
Material: High Impact Plastic
Height: 20.5mm (0.81")
Color: Grey
Diameter of Cable Seal: 59mm (2.32")
Diameter of Connector: Ø30mm (1.18")
Bungs: 1 x blank / 1 x 8.5 mm (0.34")
Compatible with:
Flat High Performance / Performance (Gen 2)
High Performance / Performance (Gen 1)
Specifications:
Type: Deck Seal
Box Dimensions: 2"H x 4"W x 8"L WT: 0.25 lbs
UPC: 5060114799707
Quick Guide (pdf)Brochure (pdf)
Heavy Wall Heat Shrink Tubing - 3/4" x 3" - 3-Pack - BlackPackage of 3 Black 3"(7.6cm) long sections with a 3/4"(19mm) diameter that shrinks to 1/4"(6.4mm)Wire Range: 8-2/0 AWGFeatures:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
3:1 Ratio
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 1"H x 3"W x 5"L WT: 0.06 lbs
UPC: 091887328004