Electrical

3943 products


  • Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 48" - 1-Pack - Red [304648]

    Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 48" - 1-Pack - Red [304648]

    29 in stock

    Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 48" - 1-Pack - RedPackage of 1 Red 48"(122cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)Wire Range: 12-8 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 1"W x 48"L WT: 0.3 lbs UPC: 091887808674

    29 in stock

    $18.50

  • Sale -32%Last stock! Ancor Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm Red/Black - 250' [121925]

    Ancor Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm Red/Black - 250' [121925]

    4 in stock

    Standard Duplex Cable - Flat 18/2 AWG - 2 x 0.8mm² Red/Black - 250'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Black Length (Feet): 250' Gauge: 18/2 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 9.8 lbs UPC: 091887101546

    4 in stock

    $134.99$91.50

  • Ancor Heavy Duty Lugs - 2 Gauge Wire - 1/2" Post - 2-Pack [252267]

    Ancor Heavy Duty Lugs - 2 Gauge Wire - 1/2" Post - 2-Pack [252267]

    10 in stock

    Heavy Duty Lugs - 2 Gauge Wire - 1/2" Post - 2-PackCable Gauge: 2Screw Size: 1/2" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Heat Shrink: No Type: Lugs Post Size: 1/2" Package Qty: 2 Gauge: 2 AWG Box Dimensions: 1"H x 2"W x 4"L WT: 0.06 lbs UPC: 091887254082 Quick Guide (pdf)

    10 in stock

    $11.50

  • Sale -25% Ancor 16-14 Heatshrink Butt Connectors - 100-Pack [309199]

    Ancor 16-14 Heatshrink Butt Connectors - 100-Pack [309199]

    10 in stock

    16-14 Heatshrink Butt Connectors - 100-PackGuage Size: 16-14Quantity: 100Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire range: 16-14 mm: 1-2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Butt Connectors Package Qty: 100 Heat Shrink: Yes Box Dimensions: 2"H x 3"W x 8"L WT: 0.4 lbs UPC: 091887307962 Quick Guide (pdf)

    10 in stock

    $54.07$40.50

  • Sale -14%Last stock! Ancor Yellow 14 AWG Primary Wire - 100' [105010]

    Ancor Yellow 14 AWG Primary Wire - 100' [105010]

    3 in stock

    Yellow 14 AWG Primary Wire - 100'Features: ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing. ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Yellow Gauge: 14 AWG Length (Feet): 100' Box Dimensions: 3"H x 4"W x 4"L WT: 1.95 lbs UPC: 091887105407 Quick Guide (pdf)Brochure (pdf)

    3 in stock

    $39.99$34.50

  • Sale -26%Last stock! Dual Pro HF Eagle ES800 Series 36V Single Lithium Charger [ES0800-36V003]

    Dual Pro HF Eagle ES800 Series 36V Single Lithium Charger [ES0800-36V003]

    4 in stock

    HF Eagle ES800 Series 36V Single Lithium ChargerFor Marine, Golf, Aerial, Emergency Services, Floor Scrubbers, and more. Applications: Marine: Connect to our PROView Link app to choose the right algorithm for your Lithium, AGM, or Lead Acid batteries and more.  Golf & LSV: Pair our portable charger with our 7.5 ft. interchangeable connector cables. We offer options for most major cart manufacturers. Our PVL app allows you to choose the algorithm for your battery(s) chemistry. Aerial Equipment: Our chargers work with most Scissor and Boom Lifts, as well as various carts and burden carriers' manufacturers. Emergency Services: First Responders & Warning Systems depend on our chargers to keep their batteries charged and conditioned for use when needed. Floor Scrubbers: Rugged and Waterproof to work in any Janitorial/Industrial environment. Your Equipment: The Eagle Series HF (ES800) is the perfect choice for any application requiring a Powerful, Durable, Waterproof Charger with Advanced Data Monitoring & Logging capabilities, with selectable algorithms all accessible via our free-to-download PROView Link App. Features: Portable and Onboard Options Output: 800W - 24VDC @ 33.3A, 36VDC @ 22.48VDC, & 48VDC @ 16.7A AC Universal Input (85-270 VAC 50/60HZ) CAN Capable PROView Link App Enabled to receive over-the-air updates and more Dimensions: L10" x W7.15" x H4" Weight: 11 LBS Developed to be interleaved for higher output requirements US Designed and Assembled Quick Guide (pdf)

    4 in stock

    $658.99$486.50

  • Sale -24% Sea-Dog Plastic Motion Sensor Switch w/Delay f/LED Lights [403066-1]

    Sea-Dog Plastic Motion Sensor Switch w/Delay f/LED Lights [403066-1]

    11 in stock

    Plastic Motion Sensor Switch with Delay for LED LightsMotion Sensor Switch can be used to activate LED and incandescent lights. The motion detection range is up to 15 feet, with an activation angle of 120°. Activation time is adjustable (10/20/50/70 seconds); factory preset 70 seconds. 2A max. 12-30VDC. IP67 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    11 in stock

    $51.95$39.50

  • Sale -20%Last stock! Dual Pro SS4 Auto 4 Bank Battery Charger w/3 Bank B.O.S. [SS4AUTO/BOS12V3]

    Dual Pro SS4 Auto 4 Bank Battery Charger w/3 Bank B.O.S. [SS4AUTO/BOS12V3]

    1 in stock

    SS4 Auto 4 Bank Battery Charger with 3 Bank B.O.S.This kit combines Dual Pro’s B.O.S. Battery Optimization System - 12V - 3-Bank (PN: BOS12V3) and Dual Pro’s SS4 Auto 40A - 4-Bank Lithium/AGM Battery Charger (PN: SS4AUTO).B.O.S. (Battery Optimization System) - 12V - 3-BankB.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.Features: Available in 6V, 8V, and 12V configuration Up to six batteries in a series Battery Selection and Prediction (BSAP-24) algorithm Less than 1mA sleep mode Transfer rate up to 7.5A Self-powered Any type of battery chemistry Used in Any Application Where Batteries Are in Series: Marine Golf Industrial Aerial Equipment Solar Power Electrical Vehicles Communications Defense/Military SS4 Auto 40A - 4-Bank Lithium/AGM Battery ChargerLatest Technology: Detects if a battery is Lithium or AGM Automatically charges both Lithium and AGM batteries for optimal performance Fully automatic. Completely and safely charges both Lithium and AGM batteries Algorithms designed and validated with battery manufacturers for a 100% charge The startup feature will wake up batteries that have turned off due to low-voltage protection Auto return to charging feature Quickest charge times in its class Unbeatable performance, reliability, safety, and quality delivered by DUAL PRO® Features: Waterproof - Use on land and in fresh and saltwater TROUBLE-FREE—Just Plug It In and Forget It! Independent outputs Fully automatic/multi-stage charging On-board diagnostic codes FCC 15 Parts A & B interference compliant Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410) 3-Year Warranty AutoProfile Intuitive Charging Technology Lithium/AGMProfessional and Sportsman Series chargers have set the standard in the marine industry for more than two decades, known as the safest, most reliable, and best performing chargers in the industry.AutoProfile Intuitive Charging Technology provides flexibility for the charging system, ready for the ever-changing lithium battery technologies. No matter if users choose Lithium or AGM batteries for the boat, Dual Pro is ready to keep a boat on the water longer, enhancing battery performance and extending battery life. Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 40a Charger Output Voltage: 12/24/36/48v Charging Banks: 4 Portable: No Box Dimensions: 3"H x 6"W x 9"L WT: 25.5 lbs Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

    1 in stock

    $1,140.98$907.50

  • Sale -28%Last stock! VETUS Fuse Holder C100 [ZEHC100]

    VETUS Fuse Holder C100 [ZEHC100]

    2 in stock

    Fuse Holder C100Fuse holder, type C100 including cover, suitable for fuses of 40 to 500 amp Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 1"H x 4"W x 6"L WT: 0.36 lbs UPC: 8717372228599 Quick Guide (pdf)

    2 in stock

    $88.22$63.50

  • Bluewater 22mm Ring Style Button - Stainless Steel [9451-1002] Bluewater 22mm Ring Style Button - Stainless Steel [9451-1002]

    Bluewater 22mm Ring Style Button - Stainless Steel [9451-1002]

    139 in stock

    22mm Ring Style Button - Stainless SteelReplacement button for Bluewater 22mm LED Lit Electronic Push Button Switches.

    139 in stock

    $13.50

  • Last stock! Bluewater 3/8" Power Post - Black [314300-B-038]

    Bluewater 3/8" Power Post - Black [314300-B-038]

    2 in stock

    3/8" Power Post - BlackA rugged single power post with a 3/8” stud, built for high-current cable termination. It’s perfect for distributing power from batteries, breakers, or busbars in demanding environments. This 3/8 power post features corrosion-resistant materials to ensure long-lasting durability even in harsh marine and industrial settings.Easy to install and designed to handle heavy electrical loads, the power post provides reliable connectivity for critical power distribution in compact spaces. Ideal for boat wiring, off-road vehicles, and other high-vibration applications where strength and security matter. Brochure (pdf)

    2 in stock

    $12.50

  • Last stock! Bluewater RGB Busbar [312404-B-022]

    Bluewater RGB Busbar [312404-B-022]

    5 in stock

    RGB BusbarDesigned specifically for RGB lighting systems, this specialized busbar enables easy, organized wiring of multi-color LED circuits. It provides consistent, reliable connectivity for lighting control.The RGB Busbar simplifies installations by grouping terminals in a logical layout, reducing clutter and setup time. Ideal for boats, RVs, or custom panels, this solution helps prevent wiring mistakes and ensures stable power delivery to color-changing LED setups.Built for durability and clean aesthetics, it’s a must-have for anyone integrating RGB lighting into demanding environments.Specifications: Current: Rated up to 100 Amp Stud Size: 1/4" Stainless Steel Mounting Holes: 0.022 Mounting Screw Size: #10, 1/4" Distance Between Mounting Holes: 4.5" Brochure (pdf)

    5 in stock

    $30.50

Electrical

© 2026 Safe Water, Powered by Safe Water

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account