Electrical

On-Board Battery Charger 30A / 12V - 3 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation On-Board Marine battery chargers include leading advancements in digital charging technology and waterproof design/construction. Every Guest charger has a dedicated charging, sensing and control per bank. The easy to read graphics indicates the status of each battery bank through the charging process.Features: All high frequency, digital charging technology Fully automatic 5-stage performance charging Dedicated battery charging, sensing and control per bank Expanded LED charge status monitor Wiring and battery fault detection Auto-maintain energy saver mode Up to 40 percent lighter 100 percent Waterproof (IP67) and shock resistant for all fresh and saltwater applications All models are pre-wired for easy installation For all 12 volt flooded and AGM lead acid batteries Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection. 2 year warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output Voltage: 12/24/36v Charger Output - Amps: 30a Charging Banks: 3 Portable: No Charger Input - Voltage: 120v Box Dimensions: 10"H x 11"W x 14"L WT: 11 lbs UPC: 046904904143 Owner's Manual (pdf)Brochure (pdf)

Read more less

ChargeMaster Battery Charger - 12 Amp - 3 Bank - 24VPower You Can Rely OnMake the most of your batteries with the ChargeMaster, plugging in and charging anywhere in the world. Mastervolt’s ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. The ChargeMaster can charge multiple battery banks simultaneously thanks to its combined functionality. Moreover, all ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection (not available on ChargeMaster 24/6). You also have the option of central, local or remote monitoring, configuration and control of your system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand.Charging Your Batteries With Every VoltageThe Mastervolt ChargeMaster supplies a maximum capacity wherever you are via auto-ranging. Auto-ranging ensures perfect fully automatic operation anywhere in the world, regardless of the available mains voltage (90-265 V AC, 50 or 60 Hz). The 3-step+ charging technology guarantees fast and complete charging, while the cos phi 1 regulation gets the most out of limited generator capacity. Sturdy Connections Metal-on-metal fitting gives a firm connection, and prevents corrosion or overheating of contact surfaces.Charging Multiple Battery Banks The ChargeMaster series has three equal charge outputs. Those of the smaller ChargeMaster models are pre-installed with two meters of cable for a plug & play solution, while the heavier models have one full output (for example for your service battery) and two outputs of 10 A, ideal for your starter batteries.Features: 3-Step+ charging technology for fast and complete charging. Safe and complete charging due to standard safety features. Memory function prevents overcharging in case of an unstable power supply. Clear control panel. Easy to install. Built-in system functionality (MasterBus) in combination with other Mastervolt products (not available on ChargeMaster 24/6). General Specifications Nominal output voltage: 24 V  Total charge current:12 A  Number of battery outlets: 3  Charge current second output: 12 A  Charge current third output:12 A  Battery capacity range: 24-120 Ah  Nominal input voltage: 120/230 V (90-265 V), 50/60 Hz AC connection: 2M AC cable Power supply mode: yes Display/read-out: LED display Fastening: 4x screw Dimensions, H x W x D: 234 x 132 x 60 mm / 9.2 x 5.2 x 2.4 inch Weight: 1.8 kg / 4.0 lb Approvals:CE, ABYC A-31, SAE J1171/ISO8846 ignition protected Technical Specifications Charge characteristic: IUoUo, automatic / 3-step+ for gel/AGM/wet/Lithium Ion Charge voltage Bulk: 28.8 V Charge voltage Absorption: 28.5 V Absorption time: 4 hours Charge voltage Float (wet batteries): 26.5 V Charge voltage Float (gel/AGM batteries): 27.6 V Temperature compensation: -60 mV/ °C -33 mV/ °F Voltage compensation: automatic Power consumption (DC side): < 2 mA Full load consumption (230 V AC): 435 W Current Control function: no Power factor control: ≥ 0.98 Temperature range (ambient temp.): -25 °C to 60 °C, derating > 25 °C -13 °F to 140 °F Sound level: < 52 dBA at 1M Protection degree: IP23 Protections: over temperature, over load, short circuit, high/low battery voltage Cooling: vario fan MasterBus compatible: yes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output Voltage: 24v Charger Output - Amps: 12a Charging Banks: 3 Portable: No Charger Input - Voltage: 120/230v Box Dimensions: 5"H x 7"W x 11"L WT: 4.65 lbs UPC: 816882020100 Owner's Manual (pdf)Brochure (pdf)

Read more less

Battery Distribution Cluster f/Triple Outboard Engine w/Four Battery BanksBattery Dist Cluster Triple EngineThe 719-140A-DVSR was designed through popular demand for our 717-140A-DVSR cluster. This system is designed for triple outboard installations. Once again using multiple VSR's off each start battery giving combined charge from all 3 outboards into the house battery via VSR's.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Remote Operated Battery Switch w/Optical Sensor 500A 12/24VThe MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters. The 720-MDO has been enhanced to offer easy standard installation, or advanced options capable of switching different voltage circuits from the main supply (for example: a 48 volt bow thruster with a 24 volt house supply). The optical sensor uses the same easy connection for standard installation and gives you the ability to control different voltage circuits such as 36 or 48 volts. It can be used to switch positive or negative lines and the main contacts can be isolated from the control circuit allowing operation via another battery source. This optical sensor also has low stand-by current draw (<5mA). Remote operation Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes. (Large cost and weight saving in copper cables) Reduced installation labor due to shorter battery cable runs Manual override option to meet CE/ABYC requirements LED status identification for remote control switch Same capacities/specifications and mounting options as standard BEP battery switches Uses interchangeable labeling system (Item # 713 or 715) Specifications:LxWxH: 4" x 4" x 4.33"Rating (A DC) Cont: 500Rating (A DC) Inter: 700Rating (A DC) Crank: 2500Voltage (V DC): 9.5-32Function: On/OffStud Size: 2x (1/2"/12mm)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Contour 1100 Series Double Interior Switch - On/Off - BlackThe Contour Interior Switch can be either surface or recess mounted. The interior series is supplied standard with a three terminal on/on switch which can be used for on/off circuits or two-way light installations. For applications such as shower drain pumps or electric toilets, momentary switches can be interchanged into the switch plate. Switches can be turned 90 degrees for horizontal mounting, and are current rated at 10A DC. All switches include a label sheet.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Action: ON-OFF Box Dimensions: 2"H x 2"W x 6"L WT: 0.11 lbs UPC: 870216005706

Read more less

Square Battery Distribution Cluster f/Single Engine w/Two Battery BanksThe 716-SQ-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management system. To be used in single outboard dual battery bank or single alternator inboard engine dual battery bank. No more flat start batteries Electronics protection from harmful engine start spikes The 716 cluster is for use on charging systems up to 150A The 716 cluster replaces battery isolator systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

FS Box Black f/15A, 20A, 30A ReceptaclesThis black non-metallic box with two 3/4" K.O. holes accepts 15A, 20A and 30A receptacles, and 7420CR weatherproof covers.Features: Accepts 15A, 20A and 30A receptacles Two 3/4 inch knockout holes Black non-metallic WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 4"H x 6"W x 10"L WT: 0.6 lbs UPC: 093344052804

Read more less

ChargeMaster 25 Amp Battery Charger - 3 Bank, 12VPower you can rely on.Always on course with Mastervolt...Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on... The power to be independent.ChargeMaster Battery ChargersMake the most of your batteries with the ChargeMaster, plugging in and charging anywhere in the world. Mastervolt's ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. The ChargeMaster can charge multiple battery banks simultaneously thanks to its combined functionality. Moreover, all ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection. You also have the option of central, local or remote monitoring, configuration and control of your system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand.Features: 3-Step+ charging technology for fast and complete charging Safe and complete charging due to standard safety features Memory function prevents overcharging in case of an unstable power supply Clear control panel Easy to install Built-in system functionality (MasterBus) in combination with other Mastervolt products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Input - Voltage: 120/230v Portable: No Charging Banks: 3 Charger Output - Amps: 25a Charger Output Voltage: 12v Box Dimensions: 5"H x 8"W x 11"L WT: 4.9 lbs UPC: 852968002318 Owner's Manual (pdf)Brochure (pdf)

Read more less

ConnectPro® Charging/Trolling System Receptacle & PlugConnectPro® Receptacle Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems Watertight sealing cap Corrosion resistant, plated brass electrical components Drain holes in receptacle keep water away from electrical components Perma-Lock™ screw terminals will not loosen under extreme hull vibration Standard 1-1/8" diameter mounting hole Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation Accepts 10 and 8 gauge wire Easily replaces other trolling motor plugs and receptacles ConnectPro® Plug O-ring seal for waterproof connections Weather resistant plug cover Corrosion resistant, plated brass electrical components Accepts 16 to 8 gauge wire Ergonomic contoured grip for easy hook-up and ground blade alignment WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 2"H x 5"W x 9"L WT: 0.35 lbs UPC: 093344304668 Brochure (pdf)

Read more less

EEL Pigtail AdaptersThese adapters are equipped with sealing collars and are for use in wet locations.Boat SideFemale Connector: Attaches to boat inlet or cordset50A-125V Locking w/ Sealing Collar SystemDock SideMale Plug: Attaches to dockside receptacle or cordset30A-125V LockingWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pigtail Adapter Box Dimensions: 4"H x 9"W x 11"L WT: 3.1 lbs UPC: 093344051791 Owner's Manual (pdf)

Read more less

Standard Cordsets50Amp 125/250V PowerCord Plus® Cordsets (4-Wire) All Marinco® cordsets are made of the highest quality, marine-grade construction with features you won't find on other power cords: Watertight molded plug and connector for safety and durability Heavy duty, super flexible marine-grade cable (50 amp 6 gauge) All models include a standard threaded ring for hook-up to ordinary threaded inlets Corrosion resistant, nickel plated contacts Power Indicator Light: Boatside connector features a molded-in LED light. When it glows red, you know you have power to the boat. Contour Grip with Thumbprint Locator: Both plug and connector ends are molded to fit the contour of your hand. When the thumbprint is in the 12 o'clock position, the blades line up for easy connection. Marinco's Easy Lock™ system: Quickly locks the cord set to the inlet in just 1/8 of a turn. The exclusive locking tabs engage slots built into all Marinco® inlets. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cordset Length: 25' Amperage: 50a Voltage: 125/250v Box Dimensions: 6"H x 17"W x 20"L WT: 23.5 lbs UPC: 093344309823 Quick Guide (pdf)

Read more less

Replacement interior for 303SSEL-B, 303SSI-B, and 301 EL-B power inlets.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Box Dimensions: 3"H x 4"W x 7"L WT: 0.3 lbs UPC: 093344005800 Quick Guide (pdf)Brochure (pdf)

Read more less