Orange 16 AWG Tinned Copper Wire - 1,000'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.Wire Gauge: 16 AWGWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Orange
Length (Feet): 1,000'
Gauge: 16 AWG
Box Dimensions: 5"H x 11"W x 11"L WT: 15.4 lbs
UPC: 091887100327
Use this 15' cable when your standard charger cables don't reach the bow, center or transom battery compartments. The cable features WAGO Wall-Nut quick connectors (UL listed), and fused (30 amp) positive and negative leads.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
360 Panel Conversion Kit - 12 to 24 V DCFeatures:
Convert a 12 Volt DC 360 Panel with rocker or toggle circuit breakers to a 24 Volt panel
Requires one kit per 12 Volt DC circuit breaker module
Includes wire harness and panel identification label
Red 16 AWG Tinned Copper Wire - 500'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.Wire Gauge: 16 AWGWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red
Length (Feet): 500'
Gauge: 16 AWG
Box Dimensions: 5"H x 7"W x 7"L WT: 7.15 lbs
UPC: 091887103687
Heavy-Duty Battery Switch - 600A ContinuousFeatures:
The 720 Heavy-duty Battery Switch is well suited to larger vessels, being capable of handling the high electrical loads found on today's boats and
RV's plus starting large diesel engines
Rated at 600A continuous and 2500A cranking
Can be rear panel, or surface mounted
Uses the same proven style of self cleaning sliding copper contact used inside the 701
Interchangeable labeling system allowing a full range of applications
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
1820 Submersible Temperature SensorFeatures:
General temperature sensor designed to work for most applications.
Easy double-sided tape installation
Fully Submersible (IP68)
Wires connect in either orderWorks will all Blue Sea Systems devices that require a temperature sensor
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ELCI Main 30A Double Pole
One 30A AC ELCI Main Residual Current Circuit Breaker, leakage trip amperate - 30 mA
ELCI provides overcurrent and leakage protection per ABYC E-11 for whole boat shore power protection
Red " Reverse Polarity" LED
All circuit label positions are backlit
"ON" indicating LEDs
SpecificationsNominal Voltaget120V ACLeakage Trip Ampst30mAHeightt5.25" (133.35mm)Widtht 3.75" (95.25mm)Deptht3.50" (88.9mm)Weightt2.25lb (1.02kg)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
AC/DC: AC
Voltage: 120v
Box Dimensions: 5"H x 9"W x 12"L WT: 2 lbs
UPC: 632085081003
Quick Guide (pdf)Owner's Manual (pdf)
AC / DC Single Pole Magnetic World Circuit BreakerThe World Circuit Breaker meets all American Boat and Yacht Council (ABYC) Standards, is UL 1077 Recognized, TUV Certified, CE marked for Europe, and CSA Certified for Canada.PN: 7200Color: BlackAmperage: 5 AmpDelay: StandardFeatures:
The industry standard circuit breaker for Blue Sea Systems electrical panels
Combines switching and circuit protection into a single device
Single pole Quick Trip models are designed specifically for electronics protection
"Trip Free" design cannot be held "ON" during fault current condition
Specifications
Circuit Breaker Type
Magnetic Hydraulic - Trip Free
Maximum Voltage
277 Volts AC / 65 Volts DC
Rated Switch Cycles
10,000@rated amperage and voltage
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 5a
Box Dimensions: 1"H x 3"W x 5"L WT: 0.2 lbs
UPC: 632085072001
8096 DC 6 Position Toggle Branch Circuit Breaker Panel - White SwitchesFeatures:
All positive, negative and grounding buses installed, fully pre-wired
Panels with meters include toggle switch for mounting up to 3 battery banks
All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
Specifications:
Positions: 6
Nominal Voltage: 12v/24v
Maximum Amperage: 100A per bus
Height: 3.75"
Width: 10.5"
Depth: 2.5"
Included:
(6) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A
(1) 8030 Basic DC Panel Label Set - 30 Labels
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Max Breaker Quantity: 6
AC/DC: DC
Voltage: 12/24v
Box Dimensions: 5"H x 9"W x 12"L WT: 2.3 lbs
UPC: 632085080969
Owner's Manual (pdf)
Green 18 AWG Primary Wire - 500' Pacer's marine wire is designed to handle the harshest marine environments. It is manufactured to meet and exceed the most stringent specifications. This 18 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility. The tinned copper also resists corrosion adding to the life of the wire. What about the insulation? After the copper is tinned it is then insulated with a durable and flexible PVC jacket. The jacket makes this 18 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture. What standards and compliances does this wire meet? Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features:
Built for durability, flexibility, and longevity in the harshest marine environments
So flexible that you can tie it into a knot without compromising any of its qualities
Proprietary insulation ensures the highest level of protection available
Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals
Compliances:
UL Standard - 1426 BC-5W2
U.S.C.G - 33 CFR part 183
ABYC - E-11.14
Technical Specifications:
Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C flexible, color-coded PVC
Voltage Rating - 600-V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture
*Sold as an Individual Specifications:
Color: Green
Gauge: 18 AWG
Length (Feet): 500'
Box Dimensions: 4"H x 7"W x 7"L WT: 5.4 lbs
Brochure (pdf)