Electrical

MultiPlus-II 12/3000 - 120-50 - 120V - UL ApprovedMultiPlus-II 48/3000 - 35-50 - 120V - UL ApprovedThe MultiPlus-II, an inverter/charger, combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with built-in anti-islanding and increasingly long list of country approvals.PowerAssistThe MultiPlus-II will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.ESS: Energy Storage SystemsThe MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters.Uninterrupted AC power (UPS function)In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will operate without disruption.Remote Monitoring and ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more.Specifications:  PowerControl & PowerAssist: Yes Transfer Switch: 50A Maximum AC Input Current: 50A Inverter Specifications: DC Input Voltage Range: 9,5 – 17 V Output: Output Voltage 120 VAC ± 2% / Frequency 60 Hz ± 0,1% (1) Continuous Output Power at 25°C (3): 3000 VA Continuous Output Power at 25°C: 2400 W Continuous Output Power at 40°C: 2200 W Continuous Output Power at 65°C: 1700 W Maximum Apparent Feed-In Power: 2500 VA Peak Power: 5500 W Maximum Efficiency: 93% Zero Load Power: 13 W Zero Load Power in AES Mode: 9 W Zero Load Power in Search Mode: 3 W Charger Specifications: AC Input: Input Voltage Range 90-140 VAC / Input Frequency: 45 – 65 Hz Charge Voltage 'Absorption': 14,4 V Charge Voltage 'Float': 13,8 V Storage Mode: 13,2 V Maximum Battery Charge Current (4): 120 A Battery Temperature Sensor: Yes General Specifications: Auxiliary Output: Yes (32 A) External AC Current Sensor (optional): 100 A Programmable Relay (5): Yes Protection (2): a – g VE.Bus Communication Port: For parallel, split phase and three phase operation, remote monitoring and system integration General Purpose Com. Port: Yes, 2x Remote On-Off: Yes Operating Temperature Range: -40 to +65°C (-40 – 150 °F) (fan assisted cooling) Humidity (Non-Condensing): Max 95% Enclosure Specifications: Material & Color: Steel, blue RAL 5012 Protection Category: IP22 Battery-Connection: M8 bolts 120 V AC-Connection: Screw terminals 13 mm² (6 AWG) Weight: 9 kg Dimensions (hxwxd) (mm): 578 x 277 x 148 Standards: Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, UL458 Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 *Note: For a short period of time this product was called MultiGrid-II.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 120VAC Charger Output - Amps: 50A Charger Output Voltage: 12VDC Charging Banks: 2 Inverter Cont. Output Wattage: 3000VA / 240W Inverter Input Voltage: 12VDC Inverter Output Voltage: 120VAC Outlet Qty: None Box Dimensions: 10"H x 14"W x 24"L WT: 52.22 lbs UPC: 8719076059196 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

MultiPlus Compact 12/2000/80-150 120V VE.Bus UL ApprovedThe MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Unique PowerAssist FeatureThe MultiPlus will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery. Uninterrupted AC Power (UPS Function)In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually Unlimited Power Thanks To Parallel OperationUp to 6 Multis can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase, and split-phase capabilities. Remote Monitoring & ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more… Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

ACS Auto Charger Selector - 12V - 80AOur Automatic Charge Selectors are smart, 100% waterproof (IP67) and compact voltage-sensing relays that automatically manage the charge function between your start and service battery banks. DOLPHIN ACS are the ideal charging-relays for outboard engine boats.SuperSafe (Unique feature)Our cutting-edge “Current Limit Function” is built on MOSFET technology and includes a one-way operating “blocking diode function”: this prevents domestic (house/service) battery voltage drop when starting your engine or bow thruster. Result: no more sensitive electronics damaged onboard (GPS, etc.).ACS is also intrinsically safe against ignition of atmospheric flammable vapours (ISO 8846), which makes it safe for installation on gasoline outboard engine boats.SuperEfficientNo more manual battery selection. No more drained batteries. Our ACS reduces amperage operating current by up to 70% in comparison with other voltage-sensing relays currently on the market. Our ACS is particularly recommended for use with Lithium batteries.100% WaterProofACS products are true Dolphins: they are IP67 certified.Other assets...With ACS, forget manual battery selection. Forget moving parts with a high failure rate. Forget battery voltage drop. Forget drained batteries. And, last but not least, DOLPHIN ACS reduces operating amperage by up to 70% in comparison with other voltage-sensing relays currently on the market.Specifications: System voltage: 12 Volts Current rating: 50 Amp Continuous / 120 Amp Peak, 80 Amp Continuous / 190 Amp Peak ACS units come with a multi-colour LED control and a remote operation switch contact Owner's Manual (pdf)

Read more less

Flip Pro Max - Dual USB-C Charge SocketDesigned for use with either a 12V or 24V input and features 2x 60W USB-C charging ports. It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops, large tablets, phones, and any other USB-C-powered devices onboard.Features: When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements Red LED running light Universal: Universal fit for any USB-C connectors Fast charge (60W max) up to 2 devices at a time Installation: Easy Install, using a Ø32mm (1.25 in.) hole saw Supplied as standard with an optional front fit bezel Marine Ready: IPX4 waterproof with the cover closed UV resistant 316 stainless steel hinge and spring Key Information: To maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12V or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops Specifications: IP Rating: IPX4 waterproof when lid is closed Input Voltage: 10-30V DC (12/24V System) Input Current Max: 6A (10A fuse recommended) Standby Power Draw: 0.01W USB – C Output: 60W max on a 24V system / 36W max on a 12V system Quick Guide (pdf)

Read more less

8 AWG Heat Shrink Butt Connector - 25 PackButt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #8 AWG Insulation Color: Pink Max Wire Insulation Outer Diameter (inch): 0.35" Package Size: Twenty-five Specifications: Heat Shrink: Yes Package Qty: 25 Post Size: #8 Type: Butt Connectors Box Dimensions: 2"H x 3"W x 5"L WT: 0.35 lbs UPC: 840248206679 Quick Guide (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - Black *5-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Five (5) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.75 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.45 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

DS-H6-BLK Horizontal Cable Seal - BlackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.15 lbs UPC: 5060114797390 Quick Guide (pdf)Brochure (pdf)

Read more less

Black 6 AWG Battery Cable - 100' ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing. ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Length (Feet): 100' Gauge: 6 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 13.2 lbs UPC: 091887111286 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

SB-8-5 Junction BoxScanstrut's SB-8-5 Junction Box is perfect for installations if you need to create a waterproof connection for multiple electrical cables.Heavy-duty junction box manufactured from marine grade polypropylene and with features 5 screw-down terminals.Depending on the number of terminations required the terminal blocks can be individually fitted or blocked together.  Supplied with 5 modular terminal blocks.  Offering 5 terminations.Cables push fit into the terminals and are secured with a sprung leaf retention system that does not damage the wire.  The terminal can be removed for easy fitting of cables. Features: Provides 5 screw-down terminals. Capacity for up to eight (8) cables to enter the box. Watertight Installation - Cables are quickly routed into the box through an IP66 elastomeric membrane, guaranteeing protection against water ingress. Upgradable to IP68 with use of SB-2G Cable Seals (sold separately)  Technical Specifications: Maximum cable size (diameter) - .50" (12 mm)   Maximum wire size - 16/1.5 to 11/4 Dimensions (L x W x H) - 3.35" x 3.35" x 2" (85  x 85 x 50 mm) Five (5) terminal block w/400 V rating and 32 A Color - Grey Material - Marine grade polypropylene In the Box: Junction box w/five (5) screw-down terminal block Mounting hardware Installation manual *Sold as an Individual Specifications: Type: Junction Box Box Dimensions: 3"H x 5"W x 7"L WT: 0.3 lbs UPC: 5060114793439 Quick Guide (pdf)Brochure (pdf)

Read more less

Fuse MIDI/AMI 70A - PairFeatures: Compact fuse with 70A amperage Tin-plated copped for corrosion resistance Clear cover offers visible indication of blown fuses Color-coded for easy amperage identification Ignition protected to SAE J1171 when used with Blue Sea Systems SafetyHub family of products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 70a Fuse Type: MIDI/AMI Type: Fuses Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 632085052546 Brochure (pdf)

Read more less

Red 3/0 AWG Battery Cable - Sold By The Foot ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing. ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Length (Feet): Sold By The Foot Gauge: 3/0 AWG Box Dimensions: 1"H x 1"W x 12"L WT: 0.6 lbs Owner's Manual (pdf)

Read more less