Mini Contour Battery Disconnect Switch - 275A ContinuousThis switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C (212°F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Features:
Can be either surface or recess mounted by cutting a 2.1" (52 mm) hole
Available with house knob (OEM # 701B-HB) or with chassis knob (OEM # 701B-CH)
Tin-plated copper studs and nuts
Ignition-protected
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Stainless Steel Cushion Clamp - 5/8" - 10-PackNominal Diameter:5/8" (16mm)Thickness: 0.06Width: 1/2" (13mm)Screw Size: #10
Prevents corrosion
Resistant to oils, acids, saltwater
Temperatures range from -50° to 300°F
Absorbs shock and vibration
Reduces unwanted noise
1/4" clearance mounting hole
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Cusion Clamp
Box Dimensions: 1"H x 3"W x 8"L WT: 0.29 lbs
UPC: 091887403626
Switch Panel - 4 Switch & 1 Row - 5.5" x 2.75" - Black Powder Coated AluminumPacer panel blanks are cut from .090" thick 5052 H32 marine grade aluminum and powder coated on all sides for maximum durability. This way they can easily handle the toughest marine conditions out there. Offered in textured black or smooth gloss white, these are the panel blanks that you have been looking for. Have a question about this or any other Pacer product? Contact a Pacer expert today.Features:
Cutouts for switches fit standard Contura switches
Use Laser Etched Actuators for easy identification of circuits
Specifications:
Positions: 4
Rows: 1
Width: 5.5 in.
Height: 2.75 in.
Color: Black
*Sold as an individual Brochure (pdf)
8/2 AWG Safety Duplex Cable - Flat Cable - Red/Yellow - 50'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits. Pacer manufactures 8 AWG Duplex boat cable in house in the USA for the best quality. First, the cable is built from finely stranded, Type III tinned copper conductors. These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 8 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating. How does it do that? During the extrusion process, the spaces between wires are filled. This leaves no space for moisture or air to accumulate. After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed. Just another reason 8 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features:
Extruded exterior cable insulation with no gaps
Highly flexible color coded wire insulation
Stranded, tinned copper conductors
Annealed Finely Stranded Tinned Copper ASTM B172 Class K
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture
Compliances:
UL Standard - 1426
U.S.C.G - 33 CFR part 183
ABYC - E-11.14
Technical Specifications:
Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K
Insulation -20 °C to 105 °C flexible, color-coded PVC
Voltage Rating - 600-V
Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture
No. of Conductors - 2
Type of Cable - Duplex
*Sold as an Individual Specifications:
Color: Red/Yellow
Gauge: 8/2 AWG
Length (Feet): 50'
Box Dimensions: 7"H x 7"W x 7"L WT: 10.65 lbs
UPC: 840248200516
Brochure (pdf)
C - Series Flat Circuit Breaker, Single and Double PolePN: 7475Amperage: 150 AmpFeatures:
Color actuator indicates "OFF" position
"Trip Free" design cannot be held "ON" during fault current condition
Flat actuator protects against accidental switching
Specifications
Circuit Breaker Type
Magnetic Hydraulic - Trip Free
Maximum Voltage
80 Volts DC
Rated Switch Cycles
10,000@rated amperage and voltage
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 150a
Box Dimensions: 4"H x 5"W x 5"L WT: 0.95 lbs
UPC: 632085074753
Kit 621 Series 100A Single FT Alt MC Reg T SensorKit Includes: 621-100-SV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware621-100-SV Alternator: 100A, 12V, Spindle Mount (Single Foot), 1-2in, Single Deep Vee Pulley, Isolated Ground1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesReplaces:621-VUP-MC-100-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Amperage: 100A
Voltage: 12v
Box Dimensions: 10"H x 11"W x 14"L WT: 16.2 lbs
UPC: 676205000543
Brochure (pdf)
ST CLB Circuit Breaker Block - 6 Position w/Negative BusFeatures
Quick connect clips allow circuit breakers to snap easily into place
Tin-plated copper busses and screw terminals
Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
Easy to open clip on cover
Breakouts allow wire access in two directions
Accepts ring terminals
Optional push button waterproof boots or dress nuts can be installed over cover
Specifications:Circuits: 6Maximum Amperage: 100A (per block) 32A (per circuit)Maximum Voltage: 32V DCMounting: #8 Screw (M4) or #8 NutNegative Bus: YesSource: Common SourceMinimum Operating Temperature: -10° CMaximum Operating Temperature: 60° CMounting Centers: 5.63"(143 mm)Screw Terminal Type: #8-32 Screws with Captive Star Lock WasherHeight: 6.69"(169.93 mm)Weight: 0.75lb (0.34 kg)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 100/32a
Box Dimensions: 3"H x 5"W x 11"L WT: 0.9 lbs
UPC: 632085050528
Brochure (pdf)
MIDI-Fuse 80A/32V (Package of 5)Victron Energy's MIDI fuses are essentially a smaller version of the MEGA fuses and are known to have low voltage drop and cold resistance. This particular pack of Victron MIDI fuses contains five 80 amp fuses.Specifications:
Max Current Rating: 80 amps
Max Voltage Rating: 32 volts
Approximate Voltage Drop: 60 mV
Cold Resistance: 0.55 mΩ
Please contact your dealer for any returns, repairs or support issues related to this product. Specifications:
Amperage: 80a
Fuse Type: MIDI/AMI
Type: Fuses
Box Dimensions: 0"H x 4"W x 6"L WT: 0.5 lbs
UPC: 8719076045946
Quick Guide (pdf)Brochure (pdf)
MIDI-Fuse 60A/58V for 48V Products (Package of 1)Victron Energy's MIDI fuses are essentially a smaller version of the MEGA fuses and are known to have low voltage drop and cold resistance. This particular package contains ONE Victron MIDI 60 amp fuse that’s designed for 48V products.Specifications:
Max Current Rating: 60 amps
Max Voltage Rating: 58 volts
Approximate Voltage Drop: 70 mV
Cold Resistance: 0.9 mΩ
Please contact your dealer for any returns, repairs or support issues related to this product. Specifications:
Amperage: 60a
Fuse Type: MIDI/AMI
Type: Fuses
Box Dimensions: 0"H x 4"W x 7"L WT: 0.05 lbs
UPC: 8719076036531
Quick Guide (pdf)Brochure (pdf)
3130 - SMS Panel Enclosure with Main & 3 Branch (15A) - 120V ACThe 3130-panel enclosure is built with UL-489 Circuit Breakers to meet CFR 46 / Coast Guard requirements. Features:
Blank apertures for custom breaker loading
Glass-filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for backlighting and ON indication
Technical Specifications:
Circuit Breaker Type - 1 x 120V Main and 3 x Branch (15A)
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 1 x Red (Reverse Polarity - 120V AC and 5 x Green ON (120V AC)
In the Box:
3130 Enclosure
Glands x 4
Labels
Mounting hardware
Instruction manual
*Sold as an Individual Quick Guide (pdf)Brochure (pdf)