Electrical

SmartShunt 500A/50MV IP65 Bluetooth Battery MonitorThe Smart Battery ShuntThe SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more.Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are wanted.The SmartShunt is equipped with Bluetooth, and a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring, or a temperature sensor.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Continuous Amperage: 500A Lockable: No Box Dimensions: 4"H x 4"W x 6"L WT: 1.15 lbs UPC: 8719076057895 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

SolidSwitch 104 for DC Loads Up To 70V/4AFeatures: The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low-power digital signal. The DC load can be resistive, capacitive or inductive (such as the coil of a high-power contactor). The SolidSwitch is not reverse polarity protected and not short circuit proof. Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

50 AMP Dual Configuration Cordset - 50'For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.  Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. The 50 AMP 125/250 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boat Side and a Twist Type Dockside connector.Features: Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord. Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet. LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions. Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion. Technical Specifications: Length - 50' Color - Orange Boatside Connection - 50 AMP/125/250 V SmartPlug Dockside Connection - 50 AMP/125/250 V Twist Type Plug *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 50 Length: 50' Type: Cordset Voltage: 125/250 Box Dimensions: 9"H x 19"W x 19"L WT: 40.6 lbs UPC: 682500440137 Owner's Manual (pdf)

Read more less

30 AMP SmartPlug/Twist Type Cordset w/White Inlet Cover - 50'For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.   Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boatside and a Twist Type Plug connector for the Dockside.Features: Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord. Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet. LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions. Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion. Quick and Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes. Technical Specifications: Length - 50' Cordset Color - Orange Inlet Color - White Boatside Connection - 30 AMP/125 V SmartPlug Dockside Connection - 30 AMP/125 V Twist Type Plug In the Box: 50' Cordset Inlet cover Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30 Length: 50' Type: Cordset Voltage: 125 Box Dimensions: 4"H x 12"W x 12"L WT: 15.2 lbs UPC: 614458746214 Owner's Manual (pdf)Brochure (pdf)

Read more less

Switch Panel - 2 Switch & 1 Row - 3" x 2.75" - Black Powder Coated AluminumPacer panel blanks are cut from .090" thick 5052 H32 marine grade aluminum and powder coated on all sides for maximum durability. This way they can easily handle the toughest marine conditions out there. Offered in textured black or smooth gloss white, these are the panel blanks that you have been looking for. Have a question about this or any other Pacer product? Contact a Pacer expert today.Features: Cutouts for switches fit standard Contura switches Use Laser Etched Actuators for easy identification of circuits Specifications: Positions: 2 Rows: 1  Width: 3 in. Height: 2.75 in. Color: Black *Sold as an individual  Brochure (pdf)

Read more less

Red 1/0 AWG Battery Cable - 50'Pacer's 1/0 AWG Marine Battery Cable is designed to exceed stringent specifications. This UL-approved cable is manufactured in-house in Sarasota, FL, USA, which ensures high quality. Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier. This is achieved by creating a flexible yet tough marine cable.This 1/0 AWG marine battery cable can handle the toughest environments. This marine battery cable is made from Type III Class K tinned copper. The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible proprietary PVC jacket. These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Applications:Connecting battery or generator to a starter, ground, switch, windlass, inverter, or other high-amperage equipmentCharacteristics: Conductor: Annealed stranded tinned copper ASTM B172 Class K Insulation: -20 °C to 105 °C Flexible, Color-Coded PVC Temperature Rating: 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating: 600-V Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture Specifications: AWG: 1/0 Color: Red Length: 50 ft. Conductor Stranding: 19x 56/0.0100 Nom. Ins. Thickness: 0.080 Nom. O.D.: 0.600 Nom. Circular Mils: 106400 Nom. MM2: 53.9 Approximate Weight: 450 lb/m Compliances: UL Standard 1426 BC-5W2 AWM 1232/1284 MTW CSA: TEW ABYC: E-11.15 Coast Guard: 33 CFR part 183 Subpart 1 Specifications: Color: Red Gauge: 1/0 AWG Length (Feet): 50' Box Dimensions: 13"H x 14"W x 14"L WT: 27.9 lbs UPC: 840248204224 Brochure (pdf)

Read more less

Clear 14/2 AWG Two Conductor Speaker Wire - 250'14 AWG Speaker wire is most often used in digital audio, home theaters, and even stereo speakers. It is important to take note that the 14 AWG speaker wire is not rated or intended for in-wall usage. How is it made? Speaker wire is constructed from two tinned copper conductors. To distinguish polarity, we have placed a positive (+) symbol on one of the conductors. Both conductors are covered with a translucent PVC jacket. This jacket is designed to be flexible to make installation as easy as possible.  How do you use 14 AWG speaker wires? Well, the first thing to do is choose the proper gauge. This can be figured out by determining how long the wire will need to be. To leave room for error, it's a good idea always to add a few extra feet. This keeps the run from becoming too tight or too slack. After you know how long the wire needs to be, you will need to consider the power requirements. Once you know the length of your run and the power requirements, you can choose the proper gauge wire. If you would like help selecting the proper speaker wire, contact a Pacer expert today. Features:Highly flexible clear insulationCompliances:RoHS Compliant Directive 2002/95/ECCharacteristics: Conductor: Fully annealed finely stranded tinned copper per ASTM B-174 Insulation: Clear PVC Temperature Range: -20 °C to 105 °C Voltage Rating: 90V Applications:Digital Audio, Stereo Speakers, and Home TheatersSpecifications: AWG: 14/2 Length: 250 ft. Conductor Stranding: 41/0.0100 Nom. O.D.: 0.120 x 0.230 Approx LB/M: 35 *Not Rated for In-Wall Use Specifications: Color: Clear Gauge: 14/2 AWG Length (Feet): 250' Box Dimensions: 6"H x 7"W x 7"L WT: 9.36 lbs UPC: 840248229470

Read more less

Tinned Lug 1/0 AWG - 5/16" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 1/0 Stud Size: 5/16” Length: 1.844” Width: 0.734” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 1/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 5/16" Type: Lugs Box Dimensions: 1"H x 5"W x 9"L WT: 0.45 lbs UPC: 840248209700 Brochure (pdf)

Read more less

MIDI-Fuse 50A/58V for 48V Products (Package of 1)Victron Energy's MIDI fuses are essentially a smaller version of the MEGA fuses and are known to have low voltage drop and cold resistance. This particular package contains ONE Victron MIDI 50 amp fuse that’s designed for 48V products.Specifications: Max Current Rating: 50 amps Max Voltage Rating: 58 volts Approximate Voltage Drop: 65 mV Cold Resistance: 1 mΩ Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Amperage: 50a Fuse Type: MIDI/AMI Type: Fuses Box Dimensions: 1"H x 4"W x 8"L WT: 0.05 lbs UPC: 8719076045977 Quick Guide (pdf)Brochure (pdf)

Read more less

Tinned Lug 4/0 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 4/0 AWG Stud Size: 1/2" Length (inch): 2.344" Width (inch): 0.984" Clearance (inch): 0.547" Package Size: Ten included Specifications: Gauge: 4/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 7"L WT: 0.85 lbs UPC: 840248205719

Read more less

Round 3 Conductor Cable - 100' - 16/3 AWG - Black, Green & WhiteRound boat cable is the ideal choice for installation in tight spaces like boat hulls. All Pacer round boat cable is manufactured in Sarasota FL, USA. Pacer's manufactured 16 AWG round boat cable is UL approved. The tinned copper conductors provide resistance to corrosion. This boat cable is the ideal multiconductor boat cable and is easy to install for many reasons. One reason it works so well is the fact that it can bend in any direction. With other, flatter cables, your range of motion is limited. It is also made from Type III finely stranded tinned copper conductors and it has flexible high-quality PVC insulation and a jacket. These things work together to make this the best boat cable available and the easiest to install in small workspaces. It also withstands the frequent vibration and flex commonly found in marine environments. Features: 16 AWG round boat cable 100 ft. of cable No. of Conductors: 3 Pacer's round boat cable is the perfect choice for a multitude of marine jobs  It's perfect for running through t-tops, sailing spars, and poling platforms  Also, it's the ideal choice for small hulls or other tight workspaces Type III, stranded, tinned copper conductors Highly flexible Easy to install and organize  Easily sealed through bulkheads Specifications: Conductor Colors: Black, green and white Conductor Stranding: 26/.0100 Jacket Color: Grey Jacket Thickness (inch): 3 conductors @ 0.045" Nom. Cable O.D. (inch): 3 conductors @ 0.395" Characteristics: Conductor: Annealed Fine Stranded Tinned Copper  ASTM B172 Class K Insulation: -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating: 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating: 600 V Resistant to: acid, alkali, abrasion, flame, gasoline, oil, and moisture Applications:Pacer's round boat cable is excellent for AC and DC internal wiring of boats and recreational vehiclesCompliances: UL Standard 1426 (BC-5W2) ABYC: E-11.16 Coast Guard: 33 CFR part 183 RoHS Compliant Specifications: Color: Black/Green/White Gauge: 16/3 AWG Length (Feet): 100' Box Dimensions: 7"H x 7"W x 8"L WT: 9.2 lbs UPC: 840248206594 Quick Guide (pdf)

Read more less

Black 1/0 AWG Battery Cable - 100' Pacer's 1/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 1/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Black Gauge: 1/0 AWG Length (Feet): 100' Box Dimensions: 9"H x 11"W x 11"L WT: 43.4 lbs UPC: 840248204156 Brochure (pdf)

Read more less