Nylon Fully Insulated Disconnect - Female - 12-10 - 25-PieceAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features:
0.250 (6.4 mm) tab size
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 310
Specifications:
Gauge: 12-10 AWG
Heat Shrink: No
Package Qty: 25
Type: Disconnects
Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs
UPC: 091887214284
Heat Shrink Multi-Wire Step Down Butt Connectors 24-8 Assorted 30-Piece Jar Ancor's adhesive lined heat shrink butt connectors can be used as a step-down from one gauge size to another or as a multi-wire connector for one gauge size wire. These connectors offer a sealed alternative for products such as a quick-tap or 3-way connector in areas where corrosion is a concern.Features:
4:1 shrink ratio tubing to ensure a watertight seal between wires
Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp
Crimp indicator on barrel for proper placement of installation tool
Clear heat shrink tubing ensures crimp accuracy
Colored stripes on the barrel indicate which crimp die to use, regardless of application
Reusable jar is clear for easy identification of the terminals and has a flip lid for ease of use
Multi-pack contains (5) 24-22/24-18 AWG butt connectors, (10) 22-18/16-14 AWG butt connectors, (10) 16-14/12-10 AWG and (5) 12-10/8 AWG butt connectors
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Package Qty: 80
Heat Shrink: Yes
Type: Kits
Box Dimensions: 3"H x 3"W x 5"L WT: 0.3 lbs
UPC: 091887990744
On-Board Battery Charger 30A / 12V - 3 Bank - 120V InputGuest On-Board battery chargers have been redesigned from the inside out with the customer in mind. Our newest generation On-Board Marine battery chargers include leading advancements in digital charging technology and waterproof design/construction. Every Guest charger has a dedicated charging, sensing and control per bank. The easy to read graphics indicates the status of each battery bank through the charging process.Features:
All high frequency, digital charging technology
Fully automatic 5-stage performance charging
Dedicated battery charging, sensing and control per bank
Expanded LED charge status monitor
Wiring and battery fault detection
Auto-maintain energy saver mode
Up to 40 percent lighter
100 percent Waterproof (IP67) and shock resistant for all fresh and saltwater applications
All models are pre-wired for easy installation
For all 12 volt flooded and AGM lead acid batteries
Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection.
2 year warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Output Voltage: 12/24/36v
Charger Output - Amps: 30a
Charging Banks: 3
Portable: No
Charger Input - Voltage: 120v
Box Dimensions: 10"H x 11"W x 14"L WT: 11 lbs
UPC: 046904904143
Owner's Manual (pdf)Brochure (pdf)
8 AWG - #10 Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Ring Terminals
Post Size: #10
Package Qty: 25
Heat Shrink: No
Gauge: 8 AWG
Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs
UPC: 091887212327
Brochure (pdf)
Heat Shrink Butt Connector Multi-Pack - 250-Piece - JarReusable jar is clear for easy identification of the terminals and has a flip lid for ease of use.Contains:
(50) 22-18 AWG Connectors
(150) 16-14 AWG Connectors
(50) 12-10 AWG Connectors
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Butt Connectors
Package Qty: 250
Heat Shrink: Yes
Box Dimensions: 4"H x 4"W x 6"L WT: 1.2 lbs
UPC: 091887988307
Heavy Wall Heat Shrink Tubing - 3/4" x 3" - 3-Pack - BlackPackage of 3 Black 3"(7.6cm) long sections with a 3/4"(19mm) diameter that shrinks to 1/4"(6.4mm)Wire Range: 8-2/0 AWGFeatures:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
3:1 Ratio
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 1"H x 3"W x 5"L WT: 0.2 lbs
UPC: 091887328004
Adhesive Lined Heat Shrink Tubing (ALT) - 3/4" x 12" - 4-Pack - RedPackage of 4 Red 12"(30.5cm) long sections with a 3/4"(19mm) diameter that shrinks to 1/4"(6.4mm)Wire Range: 8-2/0 AWGFeatures:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 2"H x 3"W x 15"L WT: 0.2 lbs
UPC: 091887308198
16-14 Male Heatshrink Disconnects - 25-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.Features:
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
UL listed and CSA recognized
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 16-14 AWG
Type: Disconnects
Package Qty: 25
Heat Shrink: Yes
Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs
UPC: 091887317060
Adhesive Lined Heat Shrink Tubing (ALT) - 1/8" x 12" - 10-Pack - BlackPackage of 10 Black 12"(30.5cm) long sections with a 1/8"(3.2mm) diameter that shrinks to 1/32"(0.8 mm)Wire Range: <18 AWGFeatures:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 1"H x 2"W x 12"L WT: 0.05 lbs
UPC: 091887300086
Adhesive Lined Heat Shrink Tubing (ALT) - 3/16" x 6" - 10-Pack - BlackPackage of 10 Black 6"(15.2cm) long sections with a 3/16"(4.8mm) diameter that shrinks to 1/16"(1.6mm)Wire Range: 20-12 AWGFeatures:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 1"H x 3"W x 8"L WT: 0.07 lbs
UPC: 091887301168
22-18 Heatshrink Butt Connetors - 500-PackGuage Size: 22-18Quantity: 500Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size.
Shrinks at 257 deg. F/125 deg. C.
Operating temperature range 40 deg. C to 110 deg. C.
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire range: 22-18
mm: 0.3 - 0.8WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 22-18 AWG
Package Qty: 500
Heat Shrink: Yes
Type: Butt Connectors
Box Dimensions: 2"H x 5"W x 8"L WT: 1.4 lbs
UPC: 091887308235
Quick Guide (pdf)
16-14 Gauge - 1/4" Heat Shrink Ring Terminal - 25-PackGauge Size: 16-14Screw Size: 1/4"Quantity: 25Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 16-14 AWG
Type: Ring Terminals
Post Size: 1/4"
Package Qty: 25
Heat Shrink: Yes
Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs
UPC: 091887316292
Quick Guide (pdf)