Electrical

ACCY-IX Blank PanelThis versatile panel is ideal when only a limited number of electrical circuits are needed or for larger systems where their modular design makes for an easy and attractive expansion of existing system capacity.Stock panels with breakers installed come standard with DC indicator lights but may be specially ordered with AC indicator lights. Blank versions of the panels have all the necessary hardware to install indicator lights and breakers. All panels are provided with a circuit identification label set of 22 common on-board electrical functions. ACCY-IX has an 8-breaker capacity, with 5 installed standard; 2-5A, 1-10A, 1-15A, 1-20A, or specify. 8 DC circuit “ON” indicator lights installed, and AC indicator lights installed on a special order basis. LS-1 label set is included.Specifications: Cut-Out Dimensions: 4 x 6 inches (10.2 x 15.2 centimeters) Weight: 2 lbs. Specifications: Max Breaker Quantity: 8 Box Dimensions: 5"H x 7"W x 12"L WT: 2.16 lbs

Read more less

Stainless Steel Low-Profile Multi Cable Seal for Cables Up to 15mmThe DS-LP-MULTI-S Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 61% in comparison to Scanstrut's DS-MULTI seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: IP68 Waterproof Designed for multiple cables up to 15mm (0.59”). UV Resistant Constructed from marine-grade 316 stainless steel No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.76 lbs UPC: 5060114798656 Quick Guide (pdf)

Read more less

Black Anodized Aluminum Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mmThe DS-LP-21B-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P-BLK seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: The cable seal is black IP68 Waterproof Designed for 9-14mm cables (0.35"–0.55") UV Resistant Constructed from marine-grade aluminium No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.28 lbs UPC: 5060114798779 Quick Guide (pdf)

Read more less

Black Anodized Aluminum Low-Profile Cable Seal for Cables 4-9mmThe DS-LP-21A-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 4–9 mm (0.15"–0.35") and connectors up to Ø21mm (0.82"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21A-P-BLK seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: The cable seal is black IP68 Waterproof Designed for 4–9mm cables (0.15"–0.35") UV Resistant Constructed from marine-grade aluminum No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal can be pocketed inside a hole made from a hole saw Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.28 lbs UPC: 5060114798601 Quick Guide (pdf)

Read more less

Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mmThe DS-LP-21B-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.Low-Profile DesignThe Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P seal. This translates to a clean, flush, more refined look.Watertight InstallationAchieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.Effortless and Repeat InstallationsFeaturing captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.Features: IP68 Waterproof Designed for 9-14mm cables (0.35"–0.55") UV Resistant Constructed from marine-grade 316 stainless steel No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.45 lbs UPC: 5060114798786 Quick Guide (pdf)

Read more less

Two Socket Mounting Plate Only This dual power socket/meter panel accommodates USB and standard power sockets and meters that are 1-1/8 inches in diameter. Constructed of injection-molded nylon. Specifications: Distance Between Holes (Length): 3-1/2 in. Distance Between Holes (Width): 1 in. Diameter: 1-1/8 in. Weight: 0.05 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4" Gauge Power Socket Adapter Mounting Plate - WhiteThis instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind. Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: White Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4" Gauge Power Socket Adapter Mounting PlateThis instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind. Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: Black Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Power Box Battery SwitchThe Power Box is controlled with a 50A battery switch and monitored with an LED voltmeter. The switch features a removable knob for extra security. The power box includes two power sockets, two Anderson outputs, one USB-C port, and four USB-A ports.Features: Onboard internal fuse block, great for john boats and kayaks  Anderson battery plug with terminals and four #8 FH mounting fasteners included 12-24V. 50A Specifications: Length (inch): 6-1/4" Height (inch): 3-1/8"  Width (inch): 5-9/16"     Volts: 12-24 Total Output (Amps): 50A Weight: 1.70 lb. Color: Black box WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Buss Bar with Cover - 6 TerminalsThis bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover.Features: Includes two 5/16"-18 stainless steel stud terminals and six #10-32 stainless steel screw terminals Installs with four #8 FH fasteners (included) 48VDC, 300A; 300VAC, 300A maximum CE and RoHS compliant Specifications: Terminals: 6 Length (inch): 5-1/2" Width (inch): 2-3/4" Depth (inch): 1-11/16" Max. Amps: 300 Fastener: #8 FH Weight: 0.68 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quattro-II - 24/3000 - 70-50/50 - 2X 120VSimilar to the MultiPlus-II 2x120V, the Quattro-II 2x120V is a combined inverter and charger specifically designed for standard North American 50A 120/240VAC split-phase applications. Additionally, it can accept two AC inputs and automatically connect to the active source.120/240V Input and Output, or 120V Input and Output (Always 120V Output When in Inverter Mode)The two AC inputs can be supplied from a split-phase 120/240V source or a single-phase 120V source. When one of the AC sources is available, the Quattro will feed through the AC to its output. The output will therefore mirror the AC input.The inverter/charger connects to the neutral and the preferred input line (L1). The power needed to charge the batteries will therefore be drawn from L1.The Quattro switches to inverter operation when no AC source is available. The inverter output is 120V single-phase. In invert mode, the Quattro connects both output lines (L1 and L2) together to provide 120VAC to loads on either line.Any 240V loads will therefore be supplied only when the Quattro is supplied by a split-phase AC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.PowerControl and PowerAssist - Boosting the Capacity of the Grid or a GeneratorA maximum grid or generator current can be set. The Quattro will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is often required only for a limited period, the Quattro will compensate for insufficient generator, shore, or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery (available on L1 input only).Two AC Inputs and Two AC OutputsThe Quattro can be connected to two independent AC sources, for example,shore-side power and a generator, or two generators. The Quattro-II will automatically connect to the active source.The main output has no-break functionality. The Quattro takes over the supply to the connected 120V loads in the event of a grid failure or when shore/generator power is disconnected. The transfer time of the L1 output is less than 18 milliseconds, so computers and other electronic equipment will continue to operate without disruption. The transfer time of the L2 output is longer: approximately 40 milliseconds.The second (auxiliary) output is live only when AC is available on the input of the Quattro. Loads that should not discharge the battery can be connected to this output.Virtually Unlimited Power Thanks to Parallel and Three-Phase OperationUp to 6 Quattros can operate in parallel to achieve a higher power output. In addition to parallel connections, three units of the same model can be configured for three-phase output. In multi-phase setups, L2 is disabled on all units.On-Site System Configuring, Monitoring and ControlSettings can be changed in a matter of minutes with the VictronConnect app or VEConfigure software (computer or laptop and MK3-USB interface are needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, and Digital Multi Control Panel.Remote Configuration and MonitoringInstall a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.Specifications: PowerControl & PowerAssist: Yes (on L1 input) Transfer Switch: 50 A Maximum AC Input Current: 50A (each leg) Inverter Specifications: DC Input Voltage Range: 19-33V Output When in Inverter Mode: Output voltage: 120 Vac ± 2% / Frequency: 60 Hz ± 0.1% (1) Cont. Output Power at 25°C: 3000 VA Cont. Output Power at 25°C: 2400 W Cont. Output Power at 40°C: 2200 W Cont. Output Power at 65°C: 1700 W Maximum Apparent Feed-in Power: 2500 VA Peak Power: 5500 W Maximum Efficiency: 94% Zero Load Power: 11W Zero Load Power in AES Mode: 8W Zero Load Power in Search Mode: 4W Charger Specifications: AC Input: Split-phase: 180-280Vac 45 – 65Hz / Single-phase: 90-140Vac 45 – 65Hz Charge Voltage 'Absorption': 28.8 V Charge Voltage 'Float':  27.6 V Storage Mode: 26.4 V Maximum Battery Charge Current: 70 A Battery Temperature Sensor: Yes General Specifications: Auxiliary Output: 50 A (each leg) External AC current Sensor (optional): 100A Programmable Relay: Yes Protection: a – g VE.Bus Communication Port: For parallel and three-phase operation, remote monitoring and system integration General Purpose com. Port: Yes, 2x Remote On-Off: Yes Operating Temperature Range: -40 to +65°C (-40 -150°F) Fan assisted cooling Humidity (non-condensing): Max 95% Enclosure Specifications: Material & Color: Steel, blue RAL 5012 Protection Category: IP22 Battery-Connection: 2 M8 bolts 120/240 V AC-Connection: Screw terminals 21 mm² (4 AWG) Weight: 22.5 kg / (50lb) Dimensions (hxwxd): 579 x 319 x 168 mm / (23 x 13 x 7 inch) Standards: Safety: EN-IEC 60335-1, EN-IEC 60335-2-29 Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Can be adjusted to 50 Hz Protection key: Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 120Vac on inverter output, input voltage ripple too high Non-linear load, crest factor 3:1. Up to 75-degrees F / 25-degrees C ambient temperature Switches off when no external AC source is available. Programmable Relay That Can for Example Be Set for General Alarm or DC under Voltage or Genset Start/Stop Function: AC rating: 120Vac / 4A / DC rating: 4A up to 35dc, 1A up to 60Vdc Use, for example, to communicate with a lithium battery BMS Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 120VAC Charger Output - Amps: 70A Charger Output Voltage: 24V Charging Banks: 2x120VAC Inverter Cont. Output Wattage: 3000VA / 2400W Inverter Input Voltage: 24VDC Inverter Output Voltage: 120VAC Outlet Qty: None Box Dimensions: 11"H x 17"W x 27"L WT: 55.9 lbs UPC: 8719076057376 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMPThe Orion-Tr Smart DC-DC charger is a professional DC-to-DC adaptive 3-stage charger with built-in Bluetooth.Bluetooth Smart Enabled: Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available. Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product.   Fully Programmable: Battery charge algorithm (configurable) or fixed output.  Smart alternator compatibility: engine running detection mechanism.   Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float: For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries, the absorption time is fixed (the default is 2 hours). Alternatively, a fixed output voltage can be chosen.   Remote On/Off:A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).  All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current:An unlimited number of units can be connected in parallel.High Temperature Protected:The output current will reduce at high ambient temperatures.  IP43 Protection:When installed with the screw terminals oriented downward.  Screw Terminals:No special tools are needed for installation.  Input fuse (not replaceable) Specifications: Input Voltage Range: 20-35 V Under Voltage Shut Down: 14 V Under Voltage Restart: 15 V Nominal Output Voltage: 24.2 V Output Voltage Adjust Range: 20-30 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 17 A Maximum Output Current (10 S) at Nominal Output Voltage: 25 A Short Circuit Output Current: 40A Cont. Output Power at 25 Degrees C: 480 W Cont. Output Power at 40 Degrees C: 400 W Efficiency: 89% No Load Input Current (2): < 80 mA  Standby Current: Less than 1 mA Galvanic Isolation: 200 VDC between input, output, and case Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C) Humidity: Max. 95 % non-condensing DC Connection: Screw terminals Maximum Cable Cross-Section: 16 mm² AWG6 Weight: 1,6 kg (3.5 lb) Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch) Protection Category: IP43 (electronic components), IP22 (connection area) Safety Standards: EN 60950 Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2 Automotive Directive Standards: ECE R10-5 Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 24v Charger Output - Amps: 17a Charger Output Voltage: 24v Charging Banks: 1 Portable: No Box Dimensions: 4"H x 5"W x 8"L WT: 3.51 lbs UPC: 8719076048985 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less