12-10 Gauge - #10 Heat Shrink Ring Terminal - 3-PackGauge Size: 12-10Screw Size: #10Quantity: 3Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Ring Terminals
Post Size: #10
Package Qty: 3
Heat Shrink: Yes
Gauge: 12-10 AWG
Box Dimensions: 1"H x 2"W x 4"L WT: 0.02 lbs
UPC: 091887316087
Quick Guide (pdf)
16-14 Gauge - #8 Heat Shrink Ring Terminal - 3-PackGauge Size: 16-14Screw Size: #8Quantity: 3Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size.
Shrinks at 257 deg. F/125 deg. C.
Operating temperature range 40 deg. C to 110 deg. C.
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire Range: 16-14
mm: 1-2
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 16-14 AWG
Post Size: #8
Package Qty: 3
Heat Shrink: Yes
Type: Ring Terminals
Box Dimensions: 1"H x 2"W x 4"L WT: 0.02 lbs
UPC: 091887313024
Quick Guide (pdf)
16-14 Heatshrink Butt Connectors - 3-PackGuage Size: 16-14Quantity: 3Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size.
Shrinks at 257 deg. F/125 deg. C.
Operating temperature range 40 deg. C to 110 deg. C.
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire range: 16-14
mm: 1-2
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Butt Connectors
Package Qty: 3
Heat Shrink: Yes
Gauge: 16-14 AWG
Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs
UPC: 091887307924
Quick Guide (pdf)
14" UV Black Mounting Cable Zip Ties - 100 PackAncor offers a wide variety of materials, styles, and sizing options. A DoubleLock design offers increased tensile strength that is 33% stronger than the industry standard cable tie. With a unique design and high-quality construction, Marinco cable ties provide a great solution for bundling wire, cable, hoses, cords and countless other applications.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Cable Ties
Box Dimensions: 3"H x 3"W x 15"L WT: 0.6 lbs
UPC: 093344050336
PowerBar 1000 - 12 5/16" Terminal Studs w/CoverComplex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks.Features:
1,000 Amp busbar for large complex wiring systems
Tin plated pure electrical copper for maximum conductivity
Stepped bus design offers two elevations for conductors which doubles the density of the wire loom compared to traditional bus bars
Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables
One-piece serrated flange nuts ensure correct and secure connections
Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires
Busbar may be cut to a shorter length to accommodate constricted spaces
Bi-directional busbar end caps allow the ganging of additional busbars
Snap on insulating cover meets ABYC and USCG requirements and includes label recess
Specs:
Number of Terminal Studs: 12
Continuous Rating: 1000A
Bus Material: Tin-Plated Copper C11000
Mounting Holes: Accepts #10 (M5) Screws
Terminal Stud Size: 5/16
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
ProTournament RemoteTri-color charge mode status.Cable length: 12'WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
PowerBar 1000 - 12 3/8" Terminal Studs w/CoverComplex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks.Features:
1,000 Amp busbar for large complex wiring systems
Tin plated pure electrical copper for maximum conductivity
Stepped bus design offers two elevations for conductors which doubles the density of the wire loom compared to traditional bus bars
Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables
One-piece serrated flange nuts ensure correct and secure connections
Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires
Busbar may be cut to a shorter length to accommodate constricted spaces
Bi-directional busbar end caps allow the ganging of additional busbars
Snap on insulating cover meets ABYC and USCG requirements and includes label recess
Specs:
Number of Terminal Studs: 12
Continuous Rating: 1000A
Bus Material: Tin-Plated Copper C11000
Mounting Holes: Accepts #10 (M5) Screws
Terminal Stud Size: 3/8
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
P12 Battery Charger LED RemoteLED Indicators
Charging LED- Quick check for green light confirms charging
Charge Stage- Displays charging stage
Equalize LED- Indicates the charger is currently in equalization mode
Fan Mode- Indicates charger's internal fan mode
Charge Output- Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations
Alert- Icon LEDs provide warning and alert status for quick diagnostics
Four Control Buttons
Fan- User adjustable settings
Dim/ Alarm- Provides adjustment to brightness of LEDs on display as well as Silence function for alarms
Output- User adjustable charger output when AC source limitations exist that require lowering the AC current draw
Power- Places P12 Battery Charger into standby mode
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)
Stainless Steel Cushion Clamp - 9/16" - 10-PackNominal Diameter:9/16" (14mm)Thickness: 0.06Width: 1/2" (13mm)Screw Size: #10
Prevents corrosion
Resistant to oils, acids, saltwater
Temperatures range from -50° to 300°F
Absorbs shock and vibration
Reduces unwanted noise
1/4" clearance mounting hole
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Cusion Clamp
Box Dimensions: 1"H x 3"W x 8"L WT: 0.31 lbs
UPC: 091887403565
WeatherDeck® 12V DC Waterproof Switch Panel - 2 Position
Integrated switch guards reduce the risk of accidental switching
Panels can be mounted in four different orientations
Panel front rated IP67 when properly mounted with watertight mounting gasket
UV stabilized weather-resistant faceplate snaps on and off providing access to components and concealing mouting screws
Weatherproof: WaterproofPositions: 2Nominal Voltage: 12V DC/24V DCCircuit Protection: NoneMaximum Amperage: 15A @ 12V DC (per circuit)Material: Reinforced PolycarbonateHeight: 2.60"(66.04 mm)Width : 3.88"(98.55 mm)Depth: 2.50"(63.5 mm)Weight: 0.52lb (0.24 kg)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Waterproof: Waterproof
AC/DC: DC
Max Breaker Quantity: 2
Voltage: 12/24v
Box Dimensions: 4"H x 6"W x 6"L WT: 0.45 lbs
UPC: 632085043032
Owner's Manual (pdf)
ST CLB Circuit Breaker Block - 12 PositionFeatures
Quick connect clips allow circuit breakers to snap easily into place
Tin-plated copper busses and screw terminals
Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
Easy to open clip on cover
Breakouts allow wire access in two directions
Accepts ring terminals
Optional push button waterproof boots or dress nuts can be installed over cover
Specifications:Circuits: 12Maximum Amperage: 32A (per circuit) 40A (per jumped circuit group)Maximum Voltage: 32V DCMounting: #8 Screw (M4) or #8 NutSource: Independent SourceMinimum Operating Temperature: -10° CMaximum Operating Temperature: 60° CMounting Centers: 10.13"(257.3 mm)Screw Terminal Type: #8-32 Screws with Captive Star Lock WasherHeight: 6.69"(169.93 mm)Weight: 1.50lb (0.68 kg)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 32/40a
Box Dimensions: 3"H x 5"W x 18"L WT: 1.3 lbs
UPC: 632085050511
Brochure (pdf)
Battery ChargerAttwood's Battery Charger is compact and perfect for your bench, garage or shop use. Overcharge, short circuit and reverse polarity protection provides years of worry free use. Provides 2 and 6 amp charge for 12V batteries. 6 amp charge for 6V batteries. Automatically switches to trickle charge mode after battery is fully charged. Dual rated 12 and 6 volt battery charger can be used for all of your marine, automotive, RV and sports applications.
LED indicator - power on
Ammeter indicates charging current
6 foot power cord length
48 inch battery connector leads
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Output - Amps: 2/6a
Charging Banks: 1
Portable: Yes
Charger Input - Voltage: 120v
Charger Output Voltage: 12v
Box Dimensions: 6"H x 9"W x 9"L WT: 6.95 lbs
UPC: 022697119018