10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry.
Saves space and adds design flexibility
Insert molded cable lugs and fiber-reinforced base provide strength and durability
Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables
Innovative, clear covers insulate and protect on three sides and offer easy access
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
Pigtail AdapterThese adapters are equipped with covers and sealing collars (where indicated), and are for use in wet locations.Boat Side: Female Connector
50A 125/250V
Locking w/Sealing Collar System
Attaches to boat inlet or cordset
Dock Side: Male Plug
30A 125V
Locking
Attaches to dockside receptacle or cordset
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Pigtail Adapter
Box Dimensions: 4"H x 9"W x 12"L WT: 2.5 lbs
UPC: 093344010309
Standard Cordsets50Amp 125/250V PowerCord Plus® Cordsets (4-Wire) All Marinco® cordsets are made of the highest quality, marine-grade construction with features you won't find on other power cords:
Watertight molded plug and connector for safety and durability
Heavy duty, super flexible marine-grade cable (50 amp 6 gauge)
All models include a standard threaded ring for hook-up to ordinary threaded inlets
Corrosion resistant, nickel plated contacts
Power Indicator Light: Boatside connector features a molded-in LED light. When it glows red, you know you have power to the boat.
Contour Grip with Thumbprint Locator: Both plug and connector ends are molded to fit the contour of your hand. When the thumbprint is in the 12 o'clock position, the blades line up for easy connection.
Marinco's Easy Lock system: Quickly locks the cord set to the inlet in just 1/8 of a turn. The exclusive locking tabs engage slots built into all Marinco® inlets.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Length: 25'
Amperage: 50a
Voltage: 125/250v
Type: Cordset
Box Dimensions: 5"H x 17"W x 20"L WT: 24 lbs
UPC: 093344309816
Quick Guide (pdf)
Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 100-PackCable Gauge: 2/0Screw Size: 3/8"
ANCOR Marine Grade lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 2/0 AWG
Type: Lugs
Post Size: 3/8"
Package Qty: 100
Heat Shrink: No
Box Dimensions: 3"H x 6"W x 8"L WT: 4.65 lbs
UPC: 091887249415
Quick Guide (pdf)
Terminal FuseColor: YellowAmperage: 100A
Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks
Ignition protected-safe for installation aboard gasoline powered boats
Clear window-visual indication of blown condition
Must be used with terminal fuse block
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Amperage: 100a
Fuse Type: Terminal
Type: Fuses
Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs
UPC: 632085051839
ProMariner Remote Bank Status Monitor Mite/Sport/TournamentProduct DescriptionProMariner's Universal Remote Battery Bank Status Monitor can be conveniently located to monitor the charge status of up to three 12 volt batteries without accessing the charger. Display may be surface or flush mounted. Connects directly to the batteries with 10' fuse protected leads provided. Works in conjunction with any charger. Dimensions: 2.4"x 3.6"x 0.75" (0.2" Flush Mount) Product Features
Remote "Push-to-Test" status of up to 3-12V battery banks
Easy to read LED indicators
Pre-wired for easy installation
Universal flush or surface mount display
Includes 10" cable harness
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Misc
Box Dimensions: 3"H x 6"W x 7"L WT: 1 lbs
UPC: 031669510609
Quick Guide (pdf)
WeatherDeck™ Water Resistant Fuse PanelPN: 4304Color: GrayFeatures:
Panel front rated IP67 when properly mounted with watertight mounting gasket
IP67 – protected against immersion up to 1 meter for 30 minutes
Designed for flybridge and open cockpit applications
Independent label back lighting circuit for remote switching and dimming
Each panel can be mounted in four different orientations
Integrated ATO/ATC fuse based circuit protection
Bicolored LEDs illuminate circuit labels to quickly identify OFF (Red), ON (Green), or Blown (No Color) circuits. No lights in any position likely indicate there is no power to the panel.
Specifications:
Weatherproof: Waterproof
Positions: 4
Nominal Voltage: 12v DC
Circuit Protection: Fuse
Maximum Amperage: 15A @ 12v DC (per circuit)
Panel Cumulative Rating: 60A
Backlit Label: Bicolored LED
Backlighting Amperage: 10mA/illuminated Circuit
Backlighting Voltage: 12v DC
Height: 4.3"
Width: 3.88"
Depth: 2.5"
Included:
(4) 4138 WeatherDeck® Toggle Switch Boot - Black
(4) 4150 WeatherDeck® Toggle Switch SPST - ON-OFF
(1) 4215 Waterproof DC Label Kit - 30 Black Square Labels V1
(4) 5242 ATO/ATC Fuse - 15 Amp
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Waterproof: Waterproof
Max Breaker Quantity: 4
AC/DC: DC
Voltage: 12v
Box Dimensions: 4"H x 6"W x 7"L WT: 0.9 lbs
UPC: 632085043049
Quick Guide (pdf)
4012 CableCap - Red 0.50 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
5028ST Blade Fuse Block w/ Cover6 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
Diesel Power Battery Selector SwitchProduct Features
Polycarbonate case
For 6, 12, 24 or 36 Volt systems
Alternator field disconnect (AFD) allowing selection of any position including "off", without damage to alternator or electrical system
One year warranty
Specifications:
Continuous Amps: 360
Momentary Amps: 600
Cable Lug Size: 1/2"
Color: Gray
Dimensions: 5-1/2" sq x 3-1/2"H
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
SG230 Battery Monitor Kit N2K BT Gateway Color Display 12-48VDCN2K Version, connect to an existing N2K network to provide real-time data on the network, including: Voltage, SoC, SoH, Time Remaining, and Current. Incluses N2K Adapter cable.Features:
Learns and displays all critical battery parameters
Supports for all common battery chemistries and voltages
Intelligent, self-calibrating accuracy
Large, bright, color display
Expandable architecture
Includes Display Shunt Gateway
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Communication Cable for SG200 - 5MBalmar's communication cable specifically for the SG200. 5 Meters in length.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.