Heavy Duty Lugs - 6 Gauge Wire - 3/8" Post - 100-PackCable Gauge: 6Screw Size: 3/8"
ANCOR Marine Grade lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow
100% tin plated copper resists corrosion from salt and moisture
Seamless barrel design allows for maximum strength when crimped
Closed end design seals out moisture so cables stay dry and corrosion free
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 6 AWG
Type: Lugs
Post Size: 3/8"
Package Qty: 100
Heat Shrink: No
Box Dimensions: 1"H x 6"W x 8"L WT: 1.2 lbs
UPC: 091887249200
Quick Guide (pdf)
22-18 Gauge - #8 Heat Shrink Ring Terminal - 100-PackGauge Size: 22-18Screw Size: #8 Quantity: 100Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size.
Shrinks at 257 deg. F/125 deg. C.
Operating temperature range 40 deg. C to 110 deg. C.
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing=
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire Range: 22-18
mm: 0.3-0.8
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gauge: 22-18 AWG
Type: Ring Terminals
Package Qty: 100
Heat Shrink: Yes
Box Dimensions: 1"H x 3"W x 4"L WT: 0.22 lbs
UPC: 091887311006
Quick Guide (pdf)Brochure (pdf)
Heavy Duty On & Off Battery Switch - 600AThe heavy-duty 422768 selector switch has 350A continuous and 1500 cranking amps to start a dual diesel engine. The battery selector switch isolates and/or combines two battery banks (422768). Installs with four #10 RH fasteners (not included). Features:
Can be surface or rear panel mounted
Ignition protected
Safe for installation on gasoline-powered boats
Constructed of injection molded nylon with machined brass contacts
CE certified
Specifications:
Length (inch): 4"
Width (inch): 4"
Depth (inch): 3-5/8"
Amps: 350
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
VDB4 4-Position Distribution Block with CoverT-Spec designed their VDB4 distribution block to handle the high-current power distribution for four (4) power sources while keeping your wiring connected securely and looking neat. You can also use this hefty little block to combine the ground wires of four (4) sources to a single grounding point. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather. Features:
One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate lock technology
In the Box:
Distribution block with one (1) 1/0 set-screw input and four (4) 4 or 8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed on input and outputs)
Two 1/2" screws
*Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
8 Position Battery Terminal - POS/NEGThe VBTPN is an eight-position battery terminal that can accept up to (4) 4/8/10 AWG set screw outputs and (4) 1/0 to 10 AWG ring terminal outputs. It includes (1) positive and (1) negative bolt-on posts for retaining the factory vehicle terminal.Features:
Compact design for simpler installation
Solid brass construction for maximum conductivity
Nickel finish
Gate Lock Technology
In the Box:
Positive and Negative post
Adapter sleeve
T20 Torx® screws
*Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
C-Series Solar Charge Controller - 40 AmpsPV charge, diversion and load controllerThe C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.Features:
Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
Two-year standard warranty
PV charge, diversion, load controller
Available remote display with cumulative AMP hours
Electronic protection against short-circuit, overload, and over-temperature conditions
Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
Field adjustable voltage and battery set point
Automatically disconnects from the battery at night
Compatible with negative ground and ungrounded systems
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
Freedom X 3000 Truesine Inverter - 120AC/12DC HardwireTrue sine wave 120 VAC inverter with built-in transfer switch. Designed for recreational and commercial applications.The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze. The Freedom X has become a popular choice for boaters in a short span of time. Xantrex has now added another product to this series — Freedom X 3000, a 3000-watt pure sine wave inverter with built-in 30A transfer relay. The Freedom X 3000 delivers full output up to 40°C/104°F with a 2 second surge of 6000 watts. The Freedom X 3000 features a large wiring bay with quick connect AC terminals for fast, reliable & easy wiring.Features:
Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads
True Sine Wave AC Power: For operation of sensitive and motor loads
Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis
Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode
Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring
Specifications:
Inverts: 12 Volt DC To 120 Volt AC
Continuous Output Power (W): 3000 Watt
With Volt/Watt Meter: No
With Thermal Protection: No
With Battery Cables: No
With Fuse: No
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Inverter Cont. Output Wattage: 3000w
AC Connection Type: Hardwire
DC Connection Type: Hardwire
GFCI: Optional
Outlet Qty: Optional
Inverter Surge Rating: 6000w
Inverter Input Voltage: 12v
Inverter Output Voltage: 120v
Waveform: True Sine Wave
Box Dimensions: 9"H x 16"W x 20"L WT: 19.9 lbs
UPC: 715535901493
Freedom HF 1800Compact inverter/charger to power the comforts of home on your boat, RV, or truckWith modified sine wave output, Freedom HF 1800 inverter/charger is designed to run entertainment systems and small appliances in smaller boats, RV's and trucks. The Freedom HF inverter/charger is the smallest, lightest, and least expensive model in the Xantrex lineup.Freedom HF is designed for demanding marine and RV conditions. Temperature-controlled multistage charging ensures that your batteries are recharged safely and efficiently. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system information and can be mounted wherever you require the information.Product Features:
Designed to power loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment
Removable digital display to provide system status
Automatic three-stage battery charger
Designed to be hardwired using a terminal strip, or by connecting AC through GFIC receptacles (Included)
Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power
Protection Features:
Battery over-voltage and under-voltage protection
Over-temperature shutdown
Automatic overload protection
Short-circuit protection
Ground-fault protection
ETL listed for use in mobile RV and marine applications
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Inverter Output Voltage: 120v
Inverter Input Voltage: 12v
Charger Input - Voltage: 120v
Outlet Qty: 1 Duplex GFCI
Charging Banks: 1
Inverter Cont. Output Wattage: 1800w
Charger Output Voltage: 12v
Charger Output - Amps: 40a
Box Dimensions: 6"H x 11"W x 20"L WT: 15.4 lbs
UPC: 715535890421
Quick Guide (pdf)Owner's Manual (pdf)
9230Analog Meter Shunt 100A/50mV
For use with DC Ammeters
For continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
VE.Can RJ45 Terminator - Bag of 2This bag contains two VE.Can RJ45 terminators. The terminators are included with some other Victron products, for example, the CANUSB.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications:
Package Qty: Two
Box Dimensions: 1"H x 1"W x 11"L WT: 0.1 lbs
UPC: 8719076019923
Quick Guide (pdf)
8 Position Panel
Designed for C-Series Circuit Breakers
Heavy 1/8" aluminum 5052 Alloy
Two-part polyurethane slate gray finish
Accepts standard Blue Sea Systems' backlight labels
Accepts standard Blue Sea Systems' "ON" indication LEDs
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Black 8 AWG Battery Cable - Sold By The Foot
ANCOR Marine Grade wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing.
ANCORs proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600V, 105°C dry and 75°C wet, and is resistant to heat and abrasion.
Exceeds all UL 1426, US Coast Guard Charter boat (CFR Title 46) and ABYC standards
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Black
Length (Feet): Sold By The Foot
Gauge: 8 AWG
Box Dimensions: 1"H x 1"W x 12"L WT: 0.1 lbs
Owner's Manual (pdf)