ProTournament 240 Elite Series3 2-Bank On-Board Marine Battery ChargerThe ProTournament Elite Series3 has been taken to the next level of design and performance, providing a competitive edge that will put you on the water first with power to last. With true rated output amperage and models up to 50 amps with Distributed-On-Demand™ charging Technology, ProTournament delivers the fastest charge times in its class. Designed to innovate and boasting 3 distinct industry 1st patent pending features.Features:
24 Amp/Two Bank
IP 67 Sealed Waterproof Design
Line of Sight, Charge Status AC Glow Plug
4 Digitally Selectable Charge Profiles
Dual Mode Battery Status Monitor
Distributed-On-Demand Technology™
Specifications:
Charger Input - Voltage: 120v
Charger Output - Amps: 24a
Charger Output Voltage: 12/24v
Charging Banks: 2
Portable: No
Box Dimensions: 7"H x 10"W x 16"L WT: 10.3 lbs
UPC: 031669532427
Quick Guide (pdf)Owner's Manual (pdf)
Safety Duplex Cable - 14/2 AWG - Red/Yellow - Flat - 500'Ancor safety duplex cable features red and yellow Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available. These cables exceed UL 1426 standards and are made from the highest quality ultra flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing. The premium vinyl insulation is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water,battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red/Yellow
Length (Feet): 500'
Gauge: 14/2 AWG
Box Dimensions: 11"H x 11"W x 11"L WT: 29.6 lbs
UPC: 091887805987
12 Volt DC 8 Position - VerticalFeatures:
4 to 32 branch circuits with installed 15 Ampere circuit breakers
Available with voltmeters, ammeters, and digital multimeters
Includes 4205-Square Format Label Set
Specifications:
Positions:t8
Nominal Voltage:t12V DC
Maximum Amperage*:t100A
Height:t7.75" (196.85mm)
Width:t4.88" (123.95mm)
Depth:t3.00" (76.2mm)
Weight:t2.60lb (1.18kg)
* Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application.Includes:(8) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A(1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL]WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
AC/DC: DC
Box Dimensions: 6"H x 6"W x 16"L WT: 2.3 lbs
UPC: 632085012007
Quick Guide (pdf)Owner's Manual (pdf)
White Triplex Cable - 12/3 AWG - Round - 250'Features:
Ancor round triplex cable features white, green and black Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available
These cables exceed UL 1426 standards and are made from the highest quality ultra flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing
Ancors proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion.
Features three Marine Grade primary conductors (white, black and green) in a white common jacket.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Length (Feet): 250'
Gauge: 12/3 AWG
Color: Black/Green/White
Box Dimensions: 11"H x 11"W x 11"L WT: 29.5 lbs
UPC: 091887806991
Standard Duplex Cable - Flat 16/2 AWG - 2 x 1mm² Red/Black - 100'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Red/Black
Length (Feet): 100'
Gauge: 16/2 AWG
Box Dimensions: 5"H x 6"W x 6"L WT: 4.6 lbs
UPC: 091887123111
Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 12" - 3-Pack - BlackPackage of 3 Black 12"(30.5cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm)Wire Range: 2-4/0 AWGFeatures:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Heat Shrink
Box Dimensions: 1"H x 4"W x 14"L WT: 0.15 lbs
UPC: 091887306767
2000W Pure Sine Wave Inverter - 24VPST Series (120 VAC)This high efficiency DC-AC inverter converts 24 Volts DC to 2000 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1 Amp. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features:
High efficiency
Can be hard wired
Temperature controlled cooling fan – reduces energy consumption
Low interference
Wide operating DC input range: 21.4 - 33.0 VDC
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Low idle power draw
Dual GFCI protected AC outlets
Optional remote control (sold separately): Model RC-200
Safety certified to UL standards, FCC compliant
Specifications:
Input: 24 VDC
Output: 120 VAC
Watts: 2000
Surge: 3500 Watts
Remote Control: RC-200 sold separately
Weight: 15.6 (lbs)
Weight: 7.1 (kg)
Dimensions: 10.35 x 18.43 x 4.16 (in)
Dimensions: 263 x 468.2 x 105.6 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Inverter Cont. Output Wattage: 2000w
Outlet Qty: 2 Duplex GFCI
Inverter Input Voltage: 24v
Waveform: Pure Sine Wave
Box Dimensions: 6"H x 12"W x 21"L WT: 17.8 lbs
UPC: 622988072222
Owner's Manual (pdf)Brochure (pdf)
On-Board Precision Charger MK-318 PCL 3 Bank x 6 AMP LI Optimized ChargerLonger run times. Shorter charge times. That's the precision difference that keeps anglers on the water longer and puts more fish in the boat. Now, the next generation of this legendary line of chargers has been optimized for 12-volt lithium (LiFePO4) batteries. Precision chargers feature battery-type selection by the bank, which now includes charge curves specially formulated for the high demands of lithium batteries, and can even wake these battery types from standby.Features:
Battery Type Selection: Each charging bank can be selected to your specific battery type (Lithium (LiFePO4) AGM or flooded lead acid) to guarantee a safe, protected charge
Automatic Temperature Compensation: Precision chargers sense and adjust to ambient temperature fluctuations to ensure a fast, accurate charge
Low-Line Voltage Compensation: When outlets don't put out the 120 volts they are supposed to, Precision Chargers compensate to deliver a fast, consistent charge no matter what
Battery Equalization: Cleans and protects your battery (flooded lead-acid only) every time you plugin. Also activates a more rigorous, complete cleaning at the push of a button
Digital Control: Microprocessor-based design delivers a faster, more precise charge every time. Precision chargers can even wake dead 12-volt lithium (LiFePO4) batteries from standby automatically.
LED Indicator Lights: Inform of charge stage, maintenance mode status, error notifications, and full charge
Automatic Multi-Stage Charging: Controls the voltage and current your battery gets throughout the charging cycle, ensuring a fast, safe and precise charge
Waterproof Construction: All on-board chargers are built to be waterproof, shock-resistant and vibration-resistant
3-Year Warranty: All battery chargers come with a full 3-year replacement warranty
Specifications:
Product Dimensions: 9.88 in x 7.75 in x 3.5 in
Product Weight: 8.4 lb
Charger Style: On-Board
Output per Bank: 6 amps
Wattage: 270W
Charge Time: 10-12 hours
Power Source: On-Shore AC
Battery Type: 12v Lithium LiFePO4, 12v AGM, 12v Flooded Lead Acid
12v Lithium-Ion (LiFePO4) Optimized: Yes
Waterproof: Yes
Digital Control: Yes
Automatic Temperature Compensation: Yes
Battery Equalization: Yes
Battery Type Selection: Yes
LED Display: Yes
Saltwater Compatible: Yes
Battery Connection: Ring Terminal
Warranty: Three-Year Warranty
Specifications:
Charger Input - Voltage: 120v
Charger Output - Amps: 6a
Charger Output Voltage: 12/24/36v
Charging Banks: 3
Portable: No
Box Dimensions: 3"H x 12"W x 17"L WT: 5 lbs
UPC: 029402049981
DS16-SL Starlink Compatible Cable Seal - GreyThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates sizes from 4-6mm (0.16"-0.24"), and connectors up to Ø16mm (0.63").Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a 100% IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features:
IP68 waterproof rated
Made from premium marine-grade UV-stable materials
Includes 316 stainless steel fixings and a waterproof 3M gasket
Captive nuts ensure an easy and reliable repeat installation
No messy sealant on bungs
Split bungs for ease of installation
Install connectors up to Ø30mm (1.18") in diameter
Fully customizable with self-drill bung options
3 bungs- 1x blank, 1x 4mm, 1x 6mm
Compatible with: Standard (Gen 3) / Standard, Enterprise (Gen 3)/ Enterprise & Mini
Specifications:
Material: High Impact Plastic
Height: 19mm (0.75")
Color: Grey
Diameter of Cable Seal: 39mm (1.18")
Diameter of Cable: 4 - 6mm (0.16"-0.24")
Bungs: 1 x 4mm (0.16") / 1 x 6mm (0.23") / 1 x Self drill
Compatible with:
Standard (Gen 3) / Standard
Enterprise (Gen 3) / Enterprise
Mini
Specifications:
Type: Deck Seal
Box Dimensions: 2"H x 4"W x 8"L WT: 0.15 lbs
UPC: 5060114799691
Quick Guide (pdf)Brochure (pdf)
DS30-SL Starlink Cable Seal - BlackThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates an 8.5mm (0.34") cable and a connector of Ø30mm (1.18") in diameter.Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a watertight seal, ensuring an IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features:
IP68 waterproof rated
Made from premium marine-grade UV-stable materials
Includes 316 stainless steel fixings and a waterproof 3M gasket
Captive nuts ensure an easy and reliable repeat installation
No messy sealant on bungs
Split bungs for ease of installation
Install connectors up to Ø30mm (1.18") in diameter
Fully customizable with self-drill bung options
2 bungs - 1x blank & 1x 8.5mm (0.34”)
Specifications:
Material: High Impact Plastic
Height: 20.5mm (0.81")
Color: Black
Diameter of Cable Seal: 59mm (2.32")
Diameter of Connector: Ø30mm (1.18")
Bungs: 1 x blank / 1 x 8.5 mm (0.34")
Compatible with:
Flat High Performance / Performance (Gen 2)
High Performance / Performance (Gen 1)
Specifications:
Type: Deck Seal
Box Dimensions: 2"H x 4"W x 8"L WT: 0.25 lbs
UPC: 5060114799714
Quick Guide (pdf)
DS30-SL Starlink Cable Seal - GreyThe perfect cable seal to elevate your Starlink installation. This vertical entry cable seal, now compatible with Starlink, is IP68 certified and accommodates an 8.5mm (0.34") cable and a connector of Ø30mm (1.18") in diameter.Designed with ease of installation, the split bung ensures no wire cutting is required. The aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make assembly easy.Multi-Functional Dome ShapeThe aesthetic dome-shaped profile provides a stronger, impact-resistant, and additional water shield.Watertight InstallationThe tapered bung is supplied with a closed base seal to form a watertight seal, ensuring an IP68-rated watertight seal.Easy & Reliable InstallationCaptive nuts make for easy assembly and allow reliable repeat installations. Each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.Split BungsThe split-seal option makes installation even easier, as it does not require the connectors to be removed during installation.Features:
IP68 waterproof rated
Made from premium marine-grade UV-stable materials
Includes 316 stainless steel fixings and a waterproof 3M gasket
Captive nuts ensure an easy and reliable repeat installation
No messy sealant on bungs
Split bungs for ease of installation
Install connectors up to Ø30mm (1.18") in diameter
Fully customizable with self-drill bung options
2 bungs - 1x blank & 1x 8.5mm (0.34”)
Specifications:
Material: High Impact Plastic
Height: 20.5mm (0.81")
Color: Grey
Diameter of Cable Seal: 59mm (2.32")
Diameter of Connector: Ø30mm (1.18")
Bungs: 1 x blank / 1 x 8.5 mm (0.34")
Compatible with:
Flat High Performance / Performance (Gen 2)
High Performance / Performance (Gen 1)
Specifications:
Type: Deck Seal
Box Dimensions: 2"H x 4"W x 8"L WT: 0.25 lbs
UPC: 5060114799707
Quick Guide (pdf)Brochure (pdf)
RJ12 UTP Cable - 0.3MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this cable is too long or too short, it can be replaced by one of these cables, lengths available from 0.3 up to 30 meters.Please contact your dealer for any returns, repairs or support issues related to this product.